lkml.org 
[lkml]   [2023]   [Jan]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] media: ov5640: Update last busy timestamp to reset autosuspend timer
Hi Jacopo,

On Sat, Jan 14, 2023 at 04:19:06PM +0100, Jacopo Mondi wrote:
> Hi Sakari
>
> On Sat, Jan 14, 2023 at 02:29:14PM +0200, Sakari Ailus wrote:
> > Hi Andrey,
> >
> > On Sat, Jan 14, 2023 at 02:21:09PM +0300, Andrey Skvortsov wrote:
> > > Otherwise autosuspend delay doesn't work and power is cut off
> > > immediately as device is freed.
> > >
> > > Signed-off-by: Andrey Skvortsov <andrej.skvortzov@gmail.com>
> > > ---
> > > drivers/media/i2c/ov5640.c | 9 ++++++++-
> > > 1 file changed, 8 insertions(+), 1 deletion(-)
> > >
> > > diff --git a/drivers/media/i2c/ov5640.c b/drivers/media/i2c/ov5640.c
> > > index ac35350..f71c0f7 100644
> > > --- a/drivers/media/i2c/ov5640.c
> > > +++ b/drivers/media/i2c/ov5640.c
> > > @@ -1238,6 +1238,7 @@ static int ov5640_write_reg(struct ov5640_dev *sensor, u16 reg, u8 val)
> > > return ret;
> > > }
> > >
> > > + pm_runtime_mark_last_busy(&sensor->i2c_client->dev);
> > > return 0;
> > > }
> > >
> > > @@ -1305,6 +1306,7 @@ static int ov5640_read_reg(struct ov5640_dev *sensor, u16 reg, u8 *val)
> > > }
> > >
> > > *val = buf[0];
> > > + pm_runtime_mark_last_busy(&sensor->i2c_client->dev);
> >
> > I wouldn't add these calls to register accesses. It's generally relevant
> > with autosuspend_put().
> >
> > The rest seems fine to me.
> >
>
> Does it mean the same should be done for the all the sensor drivers that
> use autosuspend ? I count 8 of them, not a huge number.

pm_runtime_mark_last_busy() should be called before
pm_runtime_put_autosuspend(). I was thinking of adding a helper that would
simply call both of them. We don't have that yet though.

>
> > > return 0;
> > > }
> > >
> > > @@ -3615,6 +3617,7 @@ static int ov5640_g_volatile_ctrl(struct v4l2_ctrl *ctrl)
> > > break;
> > > }
> > >
> > > + pm_runtime_mark_last_busy(&sensor->i2c_client->dev);
> > > pm_runtime_put_autosuspend(&sensor->i2c_client->dev);
> > >
> > > return 0;
> > > @@ -3702,6 +3705,7 @@ static int ov5640_s_ctrl(struct v4l2_ctrl *ctrl)
> > > break;
> > > }
> > >
> > > + pm_runtime_mark_last_busy(&sensor->i2c_client->dev);
> > > pm_runtime_put_autosuspend(&sensor->i2c_client->dev);
> > >
> > > return ret;
> > > @@ -4034,8 +4038,10 @@ static int ov5640_s_stream(struct v4l2_subdev *sd, int enable)
> > > out:
> > > mutex_unlock(&sensor->lock);
> > >
> > > - if (!enable || ret)
> > > + if (!enable || ret) {
> > > + pm_runtime_mark_last_busy(&sensor->i2c_client->dev);
> > > pm_runtime_put_autosuspend(&sensor->i2c_client->dev);
> > > + }
> > >
> > > return ret;
> > > }
> > > @@ -4203,6 +4209,7 @@ static int ov5640_probe(struct i2c_client *client)
> > >
> > > pm_runtime_set_autosuspend_delay(dev, 1000);
> > > pm_runtime_use_autosuspend(dev);
> > > + pm_runtime_mark_last_busy(dev);
> > > pm_runtime_put_autosuspend(dev);
> > >
> > > return 0;

--
Kind regards,

Sakari Ailus

\
 
 \ /
  Last update: 2023-03-26 23:41    [W:0.071 / U:0.216 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site