lkml.org 
[lkml]   [2023]   [Jan]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] ASoC: codec: rt5640: Resolve failure to set DMIC clock after playback
On Sat, Jan 14, 2023 at 12:30:54AM +0000, Jarrah Gosbell wrote:

> rt5640_set_dai_sysclk is called with freq == 0 when playback stops. This
> causes DMIC setup code to fail. I2S interface doesn't need to be active
> for codec to work, so don't clear rt5640->sysclk after
> rt5640_set_dai_sysclk is called with freq == 0.

The goal with set_sysclk() is to record the current clock
frequency, if the clock is stopped it should be set to zero. If
a machine driver is setting the input clock to zero when it's
still being provided then it should be fixed. If the device
doesn't need a clock for DMIC (which seems dubious) then whatever
is checking for a clock should be fixed.
[unhandled content-type:application/pgp-signature]
\
 
 \ /
  Last update: 2023-03-26 23:41    [W:0.074 / U:0.096 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site