lkml.org 
[lkml]   [2023]   [Jan]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH v2 1/6] acpi: cppc: Add min and max perf reg writing support
From
Hi Mario,

On 1/13/2023 11:07 AM, Mario Limonciello wrote:
> On 1/12/23 23:21, Wyes Karny wrote:
>> Currently writing of min and max perf register is deferred in
>> cppc_set_perf function. In CPPC guided mode, these registers needed to
>> be written to guide PMFW about min and max perf levels. Add this support
>
> This is generic code, so  I think rather than PMFW you should just say "the platform".
>
>> to make guided mode work properly on shared memory systems.
>
> on AMD shared memory systems.
>
>>
>> Signed-off-by: Wyes Karny <wyes.karny@amd.com>
>
> With the commit message cleaned up:
>
> Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>

Will do the cleanup part. Thanks for reviewing!

>> ---
>>   drivers/acpi/cppc_acpi.c | 16 ++++++++--------
>>   1 file changed, 8 insertions(+), 8 deletions(-)
>>
>> diff --git a/drivers/acpi/cppc_acpi.c b/drivers/acpi/cppc_acpi.c
>> index 02d83c807271..c936ff503965 100644
>> --- a/drivers/acpi/cppc_acpi.c
>> +++ b/drivers/acpi/cppc_acpi.c
>> @@ -1487,7 +1487,7 @@ EXPORT_SYMBOL_GPL(cppc_set_enable);
>>   int cppc_set_perf(int cpu, struct cppc_perf_ctrls *perf_ctrls)
>>   {
>>       struct cpc_desc *cpc_desc = per_cpu(cpc_desc_ptr, cpu);
>> -    struct cpc_register_resource *desired_reg;
>> +    struct cpc_register_resource *desired_reg, *min_perf_reg, *max_perf_reg;
>>       int pcc_ss_id = per_cpu(cpu_pcc_subspace_idx, cpu);
>>       struct cppc_pcc_data *pcc_ss_data = NULL;
>>       int ret = 0;
>> @@ -1498,6 +1498,8 @@ int cppc_set_perf(int cpu, struct cppc_perf_ctrls *perf_ctrls)
>>       }
>>         desired_reg = &cpc_desc->cpc_regs[DESIRED_PERF];
>> +    min_perf_reg = &cpc_desc->cpc_regs[MIN_PERF];
>> +    max_perf_reg = &cpc_desc->cpc_regs[MAX_PERF];
>>         /*
>>        * This is Phase-I where we want to write to CPC registers
>> @@ -1506,7 +1508,7 @@ int cppc_set_perf(int cpu, struct cppc_perf_ctrls *perf_ctrls)
>>        * Since read_lock can be acquired by multiple CPUs simultaneously we
>>        * achieve that goal here
>>        */
>> -    if (CPC_IN_PCC(desired_reg)) {
>> +    if (CPC_IN_PCC(desired_reg) || CPC_IN_PCC(min_perf_reg) || CPC_IN_PCC(max_perf_reg)) {
>>           if (pcc_ss_id < 0) {
>>               pr_debug("Invalid pcc_ss_id\n");
>>               return -ENODEV;
>> @@ -1529,13 +1531,11 @@ int cppc_set_perf(int cpu, struct cppc_perf_ctrls *perf_ctrls)
>>           cpc_desc->write_cmd_status = 0;
>>       }
>>   -    /*
>> -     * Skip writing MIN/MAX until Linux knows how to come up with
>> -     * useful values.
>> -     */
>>       cpc_write(cpu, desired_reg, perf_ctrls->desired_perf);
>> +    cpc_write(cpu, min_perf_reg, perf_ctrls->min_perf);
>> +    cpc_write(cpu, max_perf_reg, perf_ctrls->max_perf);
>>   -    if (CPC_IN_PCC(desired_reg))
>> +    if (CPC_IN_PCC(desired_reg) || CPC_IN_PCC(min_perf_reg) || CPC_IN_PCC(max_perf_reg))
>>           up_read(&pcc_ss_data->pcc_lock);    /* END Phase-I */
>>       /*
>>        * This is Phase-II where we transfer the ownership of PCC to Platform
>> @@ -1583,7 +1583,7 @@ int cppc_set_perf(int cpu, struct cppc_perf_ctrls *perf_ctrls)
>>        * case during a CMD_READ and if there are pending writes it delivers
>>        * the write command before servicing the read command
>>        */
>> -    if (CPC_IN_PCC(desired_reg)) {
>> +    if (CPC_IN_PCC(desired_reg) || CPC_IN_PCC(min_perf_reg) || CPC_IN_PCC(max_perf_reg)) {
>>           if (down_write_trylock(&pcc_ss_data->pcc_lock)) {/* BEGIN Phase-II */
>>               /* Update only if there are pending write commands */
>>               if (pcc_ss_data->pending_pcc_write_cmd)
>

--
Thanks & Regards,
Wyes

\
 
 \ /
  Last update: 2023-03-26 23:38    [W:0.364 / U:0.348 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site