lkml.org 
[lkml]   [2023]   [Jan]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v10 2/6] dt-bindings/thermal/mediatek: Add dt-binding document for LVTS thermal controllers
On Fri, Jan 13, 2023 at 12:54 PM Matthias Brugger
<matthias.bgg@gmail.com> wrote:
>
>
>
> On 12/01/2023 16:28, bchihi@baylibre.com wrote:
> > From: Balsam CHIHI <bchihi@baylibre.com>
> >
> > Add dt-binding document for mt8192 and mt8195 LVTS thermal controllers.
> >
> > Signed-off-by: Balsam CHIHI <bchihi@baylibre.com>
> > ---
> > .../thermal/mediatek,lvts-thermal.yaml | 140 ++++++++++++++++++
> > 1 file changed, 140 insertions(+)
> > create mode 100644 Documentation/devicetree/bindings/thermal/mediatek,lvts-thermal.yaml
> >
> > diff --git a/Documentation/devicetree/bindings/thermal/mediatek,lvts-thermal.yaml b/Documentation/devicetree/bindings/thermal/mediatek,lvts-thermal.yaml
> > new file mode 100644
> > index 000000000000..43b8777fc1b2
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/thermal/mediatek,lvts-thermal.yaml
> > @@ -0,0 +1,140 @@
> > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> > +%YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/thermal/mediatek,lvts-thermal.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: MediaTek SoC Low Voltage Thermal Sensor (LVTS)
> > +
> > +maintainers:
> > + - Balsam CHIHI <bchihi@baylibre.com>
> > +
> > +description: |
> > + LVTS is a thermal management architecture composed of three subsystems,
> > + a Sensing device - Thermal Sensing Micro Circuit Unit (TSMCU),
> > + a Converter - Low Voltage Thermal Sensor converter (LVTS), and
> > + a Digital controller (LVTS_CTRL).
> > +
> > +properties:
> > + compatible:
> > + enum:
> > + - mediatek,mt8192-lvts-mcu
> > + - mediatek,mt8192-lvts-ap
>
> I wonder: you provide the binding description for mt8192 but no implementation
> in the driver. Are you sure the description is correct?

Hi Matthias,

Yes it is correct.
mt8192 driver implementation will be added after this series, to make
it easier to review.
Would you like to remove the binding description of mt8192 from this series?

Best regards,
Balsam.

>
> Regards,
> Matthias
>
> > + - mediatek,mt8195-lvts-mcu
> > + - mediatek,mt8195-lvts-ap
> > +
> > + reg:
> > + maxItems: 1
> > +
> > + interrupts:
> > + maxItems: 1
> > +
> > + clocks:
> > + maxItems: 1
> > +
> > + resets:
> > + maxItems: 1
> > + description: LVTS reset for clearing temporary data on AP/MCU.
> > +
> > + nvmem-cells:
> > + minItems: 1
> > + items:
> > + - description: Calibration eFuse data 1 for LVTS
> > + - description: Calibration eFuse data 2 for LVTS
> > +
> > + nvmem-cell-names:
> > + minItems: 1
> > + items:
> > + - const: lvts-calib-data-1
> > + - const: lvts-calib-data-2
> > +
> > + "#thermal-sensor-cells":
> > + const: 1
> > +
> > +allOf:
> > + - $ref: thermal-sensor.yaml#
> > +
> > + - if:
> > + properties:
> > + compatible:
> > + contains:
> > + enum:
> > + - mediatek,mt8192-lvts-mcu
> > + - mediatek,mt8192-lvts-ap
> > + then:
> > + properties:
> > + nvmem-cells:
> > + maxItems: 1
> > +
> > + nvmem-cell-names:
> > + maxItems: 1
> > +
> > + - if:
> > + properties:
> > + compatible:
> > + contains:
> > + enum:
> > + - mediatek,mt8195-lvts-mcu
> > + - mediatek,mt8195-lvts-ap
> > + then:
> > + properties:
> > + nvmem-cells:
> > + maxItems: 2
> > +
> > + nvmem-cell-names:
> > + maxItems: 2
> > +
> > +required:
> > + - compatible
> > + - reg
> > + - interrupts
> > + - clocks
> > + - resets
> > + - nvmem-cells
> > + - nvmem-cell-names
> > + - "#thermal-sensor-cells"
> > +
> > +additionalProperties: false
> > +
> > +examples:
> > + - |
> > + #include <dt-bindings/interrupt-controller/arm-gic.h>
> > + #include <dt-bindings/clock/mt8195-clk.h>
> > + #include <dt-bindings/reset/mt8195-resets.h>
> > + #include <dt-bindings/thermal/mediatek-lvts.h>
> > +
> > + soc {
> > + #address-cells = <2>;
> > + #size-cells = <2>;
> > +
> > + lvts_mcu: thermal-sensor@11278000 {
> > + compatible = "mediatek,mt8195-lvts-mcu";
> > + reg = <0 0x11278000 0 0x1000>;
> > + interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH 0>;
> > + clocks = <&infracfg_ao CLK_INFRA_AO_THERM>;
> > + resets = <&infracfg_ao MT8195_INFRA_RST4_THERM_CTRL_MCU_SWRST>;
> > + nvmem-cells = <&lvts_efuse_data1 &lvts_efuse_data2>;
> > + nvmem-cell-names = "lvts-calib-data-1", "lvts-calib-data-2";
> > + #thermal-sensor-cells = <1>;
> > + };
> > + };
> > +
> > + thermal_zones: thermal-zones {
> > + cpu0-thermal {
> > + polling-delay = <1000>;
> > + polling-delay-passive = <250>;
> > + thermal-sensors = <&lvts_mcu MT819x_MCU_LITTLE_CPU0>;
> > + trips {
> > + cpu0_alert: trip-alert {
> > + temperature = <85000>;
> > + hysteresis = <2000>;
> > + type = "passive";
> > + };
> > + cpu0_crit: trip-crit {
> > + temperature = <100000>;
> > + hysteresis = <2000>;
> > + type = "critical";
> > + };
> > + };
> > + };
> > + };

\
 
 \ /
  Last update: 2023-03-26 23:39    [W:0.061 / U:0.272 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site