lkml.org 
[lkml]   [2023]   [Jan]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH] arm64: dts: qcom: sc8280xp: Define CMA region for CRD and X13s
From


On 13.01.2023 05:10, Bjorn Andersson wrote:
> Booting the CRD needs roughly 64MB CMA, rather than relying on people
> adding boot parameters etc define a region for this, to remove the
> allocation errors from e.g. NVME.
>
> While fixing the CRD define the same region for the X13s.
>
> Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
> ---
So, to reiterate, the NVMe needs ~64M of contiguous RAM for
$reasons and without this patch, it is not guaranteed that
it can always find such a block which causes issues and
adding a CMA region resolves that, is that correct?

Konrad
> arch/arm64/boot/dts/qcom/sc8280xp-crd.dts | 9 +++++++++
> .../boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts | 9 +++++++++
> 2 files changed, 18 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts b/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts
> index b29c02307839..e30a37c73b90 100644
> --- a/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts
> +++ b/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts
> @@ -128,6 +128,15 @@ vreg_wwan: regulator-wwan {
>
> regulator-boot-on;
> };
> +
> + reserved-memory {
> + linux,cma {
> + compatible = "shared-dma-pool";
> + size = <0x0 0x8000000>;
> + reusable;
> + linux,cma-default;
> + };
> + };
> };
>
> &apps_rsc {
> diff --git a/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts b/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts
> index 78e61a8184c5..5bfd1f0b2a24 100644
> --- a/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts
> +++ b/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts
> @@ -153,6 +153,15 @@ vreg_wwan: regulator-wwan {
> regulator-boot-on;
> };
>
> + reserved-memory {
> + linux,cma {
> + compatible = "shared-dma-pool";
> + size = <0x0 0x8000000>;
> + reusable;
> + linux,cma-default;
> + };
> + };
> +
> thermal-zones {
> skin-temp-thermal {
> polling-delay-passive = <250>;

\
 
 \ /
  Last update: 2023-03-26 23:39    [W:0.580 / U:0.008 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site