lkml.org 
[lkml]   [2023]   [Jan]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH 1/4] arm64: dts: beacon-renesom: Fix gpio expander reference
On Wed, Jan 11, 2023 at 11:05 AM Adam Ford <aford173@gmail.com> wrote:
>
> On Wed, Jan 11, 2023 at 10:29 AM Geert Uytterhoeven
> <geert@linux-m68k.org> wrote:
> >
> > Hi Adam,
> >
> > On Wed, Jan 4, 2023 at 3:12 PM Adam Ford <aford173@gmail.com> wrote:
> > > The board used to originally introduce the Beacon Embedded
> > > RZ/G2[M/N/H] boards had a GPIO expander with address 20, but
> > > this was change when the final board went to production.
> > >
> > > The production boards changed both the part itself and
> > > the address. With the incorrect address, the LCD cannot
> > > come up. If the LCD fails, the rcar-du driver fails to come up,
> > > and that also breaks HDMI.
> > >
> > > Pre-release board were not shipped to the general public, so it
> > > should be safe to push this as a fix. Anyone with a production
> > > board would have video fail due to this GPIO expander change.
> > >
> > > Fixes: a1d8a344f1ca ("arm64: dts: renesas: Introduce r8a774a1-beacon-rzg2m-kit")
> > > Signed-off-by: Adam Ford <aford173@gmail.com>
> >
> > Thanks for your patch!
> >
> > > --- a/arch/arm64/boot/dts/renesas/beacon-renesom-baseboard.dtsi
> > > +++ b/arch/arm64/boot/dts/renesas/beacon-renesom-baseboard.dtsi
> > > @@ -437,20 +437,6 @@ wm8962_endpoint: endpoint {
> > > };
> > > };
> > >
> > > - /* 0 - lcd_reset */
> > > - /* 1 - lcd_pwr */
> > > - /* 2 - lcd_select */
> > > - /* 3 - backlight-enable */
> > > - /* 4 - Touch_shdwn */
> > > - /* 5 - LCD_H_pol */
> > > - /* 6 - lcd_V_pol */
> > > - gpio_exp1: gpio@20 {
> > > - compatible = "onnn,pca9654";
> > > - reg = <0x20>;
> > > - gpio-controller;
> > > - #gpio-cells = <2>;
> > > - };
> > > -
> > > touchscreen@26 {
> > > compatible = "ilitek,ili2117";
> > > reg = <0x26>;
> > > @@ -482,6 +468,21 @@ hd3ss3220_out_ep: endpoint {
> > > };
> > > };
> > > };
> > > +
> > > + gpio_exp1: gpio@70 {
> > > + compatible = "onnn,pca9654";
> >
> > According to the patch description, the actual part was changed, too?

After a bit of some investigation, the part was changed to
nxp,pca9538. It appears to be the same driver and the same ".data"
structure is used. This probably explains why I didn't see any issues
when I was testing this. Unfortunately, the hardware engineer who
made this hardware change is not around to ask why the change was
made. I'll do a V2 since, I don't see this in renesas-devel.

adam
>
> humm.. I was under the impression it was after talking with one of the
> hardware developers, but clearly it's using the same compatible name.
> I will investigate this further. One way or the other, I'll redo the
> commit message.
>
> adam
> >
> > > + reg = <0x70>;
> > > + gpio-controller;
> > > + #gpio-cells = <2>;
> > > + gpio-line-names =
> > > + "lcd_reset",
> > > + "lcd_pwr",
> > > + "lcd_select",
> > > + "backlight-enable",
> > > + "Touch_shdwn",
> > > + "LCD_H_pol",
> > > + "lcd_V_pol";
> > > + };
> > > };
> >
> > The rest LGTM.
> >
> > Gr{oetje,eeting}s,
> >
> > Geert
> >
> > --
> > Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org
> >
> > In personal conversations with technical people, I call myself a hacker. But
> > when I'm talking to journalists I just say "programmer" or something like that.
> > -- Linus Torvalds

\
 
 \ /
  Last update: 2023-03-26 23:39    [W:0.050 / U:0.048 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site