lkml.org 
[lkml]   [2023]   [Jan]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v3 3/3] docs/mm: Physical Memory: add structure, introduction and nodes description
On Thu 12-01-23 11:16:16, Mike Rapoport wrote:
> From: "Mike Rapoport (IBM)" <rppt@kernel.org>
>
> Add structure, introduction and Nodes section to Physical Memory
> chapter.
>
> Signed-off-by: Mike Rapoport (IBM) <rppt@kernel.org>

Acked-by: Michal Hocko <mhocko@suse.com>

Thanks!

> ---
> Documentation/mm/physical_memory.rst | 346 +++++++++++++++++++++++++++
> 1 file changed, 346 insertions(+)
>
> diff --git a/Documentation/mm/physical_memory.rst b/Documentation/mm/physical_memory.rst
> index 2ab7b8c1c863..eed583af6985 100644
> --- a/Documentation/mm/physical_memory.rst
> +++ b/Documentation/mm/physical_memory.rst
> @@ -3,3 +3,349 @@
> ===============
> Physical Memory
> ===============
> +
> +Linux is available for a wide range of architectures so there is a need for an
> +architecture-independent abstraction to represent the physical memory. This
> +chapter describes the structures used to manage physical memory in a running
> +system.
> +
> +The first principal concept prevalent in the memory management is
> +`Non-Uniform Memory Access (NUMA)
> +<https://en.wikipedia.org/wiki/Non-uniform_memory_access>`_.
> +With multi-core and multi-socket machines, memory may be arranged into banks
> +that incur a different cost to access depending on the “distance” from the
> +processor. For example, there might be a bank of memory assigned to each CPU or
> +a bank of memory very suitable for DMA near peripheral devices.
> +
> +Each bank is called a node and the concept is represented under Linux by a
> +``struct pglist_data`` even if the architecture is UMA. This structure is
> +always referenced to by it's typedef ``pg_data_t``. ``A pg_data_t`` structure
> +for a particular node can be referenced by ``NODE_DATA(nid)`` macro where
> +``nid`` is the ID of that node.
> +
> +For NUMA architectures, the node structures are allocated by the architecture
> +specific code early during boot. Usually, these structures are allocated
> +locally on the memory bank they represent. For UMA architectures, only one
> +static ``pg_data_t`` structure called ``contig_page_data`` is used. Nodes will
> +be discussed further in Section :ref:`Nodes <nodes>`
> +
> +The entire physical address space is partitioned into one or more blocks
> +called zones which represent ranges within memory. These ranges are usually
> +determined by architectural constraints for accessing the physical memory.
> +The memory range within a node that corresponds to a particular zone is
> +described by a ``struct zone``, typedeffed to ``zone_t``. Each zone has
> +one of the types described below.
> +
> +* ``ZONE_DMA`` and ``ZONE_DMA32`` historically represented memory suitable for
> + DMA by peripheral devices that cannot access all of the addressable
> + memory. For many years there are better more and robust interfaces to get
> + memory with DMA specific requirements (:ref:`DMA API <_dma_api>`), but
> + ``ZONE_DMA`` and ``ZONE_DMA32`` still represent memory ranges that have
> + restrictions on how they can be accessed.
> + Depending on the architecture, either of these zone types or even they both
> + can be disabled at build time using ``CONFIG_ZONE_DMA`` and
> + ``CONFIG_ZONE_DMA32`` configuration options. Some 64-bit platforms may need
> + both zones as they support peripherals with different DMA addressing
> + limitations.
> +
> +* ``ZONE_NORMAL`` is for normal memory that can be accessed by the kernel all
> + the time. DMA operations can be performed on pages in this zone if the DMA
> + devices support transfers to all addressable memory. ``ZONE_NORMAL`` is
> + always enabled.
> +
> +* ``ZONE_HIGHMEM`` is the part of the physical memory that is not covered by a
> + permanent mapping in the kernel page tables. The memory in this zone is only
> + accessible to the kernel using temporary mappings. This zone is available
> + only on some 32-bit architectures and is enabled with ``CONFIG_HIGHMEM``.
> +
> +* ``ZONE_MOVABLE`` is for normal accessible memory, just like ``ZONE_NORMAL``.
> + The difference is that the contents of most pages in ``ZONE_MOVABLE`` is
> + movable. That means that while virtual addresses of these pages do not
> + change, their content may move between different physical pages. Often
> + ``ZONE_MOVABLE`` is populated during memory hotplug, but it may be
> + also populated on boot using one of ``kernelcore``, ``movablecore`` and
> + ``movable_node`` kernel command line parameters. See :ref:`Page migration
> + <page_migration>` and :ref:`Memory Hot(Un)Plug <_admin_guide_memory_hotplug>`
> + for additional details.
> +
> +* ``ZONE_DEVICE`` represents memory residing on devices such as PMEM and GPU.
> + It has different characteristics than RAM zone types and it exists to provide
> + :ref:`struct page <Pages>` and memory map services for device driver
> + identified physical address ranges. ``ZONE_DEVICE`` is enabled with
> + configuration option ``CONFIG_ZONE_DEVICE``.
> +
> +It is important to note that many kernel operations can only take place using
> +``ZONE_NORMAL`` so it is the most performance critical zone. Zones are
> +discussed further in Section :ref:`Zones <zones>`.
> +
> +The relation between node and zone extents is determined by the physical memory
> +map reported by the firmware, architectural constraints for memory addressing
> +and certain parameters in the kernel command line.
> +
> +For example, with 32-bit kernel on an x86 UMA machine with 2 Gbytes of RAM the
> +entire memory will be on node 0 and there will be three zones: ``ZONE_DMA``,
> +``ZONE_NORMAL`` and ``ZONE_HIGHMEM``::
> +
> + 0 2G
> + +-------------------------------------------------------------+
> + | node 0 |
> + +-------------------------------------------------------------+
> +
> + 0 16M 896M 2G
> + +----------+-----------------------+--------------------------+
> + | ZONE_DMA | ZONE_NORMAL | ZONE_HIGHMEM |
> + +----------+-----------------------+--------------------------+
> +
> +
> +With a kernel built with ``ZONE_DMA`` disabled and ``ZONE_DMA32`` enabled and
> +booted with ``movablecore=80%`` parameter on an arm64 machine with 16 Gbytes of
> +RAM equally split between two nodes, there will be ``ZONE_DMA32``,
> +``ZONE_NORMAL`` and ``ZONE_MOVABLE`` on node 0, and ``ZONE_NORMAL`` and
> +``ZONE_MOVABLE`` on node 1::
> +
> +
> + 1G 9G 17G
> + +--------------------------------+ +--------------------------+
> + | node 0 | | node 1 |
> + +--------------------------------+ +--------------------------+
> +
> + 1G 4G 4200M 9G 9320M 17G
> + +---------+----------+-----------+ +------------+-------------+
> + | DMA32 | NORMAL | MOVABLE | | NORMAL | MOVABLE |
> + +---------+----------+-----------+ +------------+-------------+
> +
> +.. _nodes:
> +
> +Nodes
> +=====
> +
> +As we have mentioned, each node in memory is described by a ``pg_data_t`` which
> +is a typedef for a ``struct pglist_data``. When allocating a page, by default
> +Linux uses a node-local allocation policy to allocate memory from the node
> +closest to the running CPU. As processes tend to run on the same CPU, it is
> +likely the memory from the current node will be used. The allocation policy can
> +be controlled by users as described in
> +Documentation/admin-guide/mm/numa_memory_policy.rst.
> +
> +Most NUMA architectures maintain an array of pointers to the node
> +structures. The actual structures are allocated early during boot when
> +architecture specific code parses the physical memory map reported by the
> +firmware. The bulk of the node initialization happens slightly later in the
> +boot process by free_area_init() function, described later in Section
> +:ref:`Initialization <initialization>`.
> +
> +
> +Along with the node structures, kernel maintains an array of ``nodemask_t``
> +bitmasks called ``node_states``. Each bitmask in this array represents a set of
> +nodes with particular properties as defined by ``enum node_states``:
> +
> +``N_POSSIBLE``
> + The node could become online at some point.
> +``N_ONLINE``
> + The node is online.
> +``N_NORMAL_MEMORY``
> + The node has regular memory.
> +``N_HIGH_MEMORY``
> + The node has regular or high memory. When ``CONFIG_HIGHMEM`` is disabled
> + aliased to ``N_NORMAL_MEMORY``.
> +``N_MEMORY``
> + The node has memory(regular, high, movable)
> +``N_CPU``
> + The node has one or more CPUs
> +
> +For each node that has a property described above, the bit corresponding to the
> +node ID in the ``node_states[<property>]`` bitmask is set.
> +
> +For example, for node 2 with normal memory and CPUs, bit 2 will be set in ::
> +
> + node_states[N_POSSIBLE]
> + node_states[N_ONLINE]
> + node_states[N_NORMAL_MEMORY]
> + node_states[N_MEMORY]
> + node_states[N_CPU]
> +
> +For various operations possible with nodemasks please refer to
> +``include/linux/nodemask.h``.
> +
> +Among other things, nodemasks are used to provide macros for node traversal,
> +namely ``for_each_node()`` and ``for_each_online_node()``.
> +
> +For instance, to call a function foo() for each online node::
> +
> + for_each_online_node(nid) {
> + pg_data_t *pgdat = NODE_DATA(nid);
> +
> + foo(pgdat);
> + }
> +
> +Node structure
> +--------------
> +
> +The nodes structure ``struct pglist_data`` is declared in
> +``include/linux/mmzone.h``. Here we briefly describe fields of this
> +structure:
> +
> +General
> +~~~~~~~
> +
> +``node_zones``
> + The zones for this node. Not all of the zones may be populated, but it is
> + the full list. It is referenced by this node's node_zonelists as well as
> + other node's node_zonelists.
> +
> +``node_zonelists``
> + The list of all zones in all nodes. This list defines the order of zones
> + that allocations are preferred from. The ``node_zonelists`` is set up by
> + ``build_zonelists()`` in ``mm/page_alloc.c`` during the initialization of
> + core memory management structures.
> +
> +``nr_zones``
> + Number of populated zones in this node.
> +
> +``node_mem_map``
> + For UMA systems that use FLATMEM memory model the 0's node
> + ``node_mem_map`` is array of struct pages representing each physical frame.
> +
> +``node_page_ext``
> + For UMA systems that use FLATMEM memory model the 0's node
> + ``node_page_ext`` is array of extensions of struct pages. Available only
> + in the kernels built with ``CONFIG_PAGE_EXTENTION`` enabled.
> +
> +``node_start_pfn``
> + The page frame number of the starting page frame in this node.
> +
> +``node_present_pages``
> + Total number of physical pages present in this node.
> +
> +``node_spanned_pages``
> + Total size of physical page range, including holes.
> +
> +``node_size_lock``
> + A lock that protects the fields defining the node extents. Only defined when
> + at least one of ``CONFIG_MEMORY_HOTPLUG`` or
> + ``CONFIG_DEFERRED_STRUCT_PAGE_INIT`` configuration options are enabled.
> + ``pgdat_resize_lock()`` and ``pgdat_resize_unlock()`` are provided to
> + manipulate ``node_size_lock`` without checking for ``CONFIG_MEMORY_HOTPLUG``
> + or ``CONFIG_DEFERRED_STRUCT_PAGE_INIT``.
> +
> +``node_id``
> + The Node ID (NID) of the node, starts at 0.
> +
> +``totalreserve_pages``
> + This is a per-node reserve of pages that are not available to userspace
> + allocations.
> +
> +``first_deferred_pfn``
> + If memory initialization on large machines is deferred then this is the first
> + PFN that needs to be initialized. Defined only when
> + ``CONFIG_DEFERRED_STRUCT_PAGE_INIT`` is enabled
> +
> +``deferred_split_queue``
> + Per-node queue of huge pages that their split was deferred. Defined only when ``CONFIG_TRANSPARENT_HUGEPAGE`` is enabled.
> +
> +``__lruvec``
> + Per-node lruvec holding LRU lists and related parameters. Used only when
> + memory cgroups are disabled. It should not be accessed directly, use
> + ``mem_cgroup_lruvec()`` to look up lruvecs instead.
> +
> +Reclaim control
> +~~~~~~~~~~~~~~~
> +
> +See also :ref:`Page Reclaim <page_reclaim>`.
> +
> +``kswapd``
> + Per-node instance of kswapd kernel thread.
> +
> +``kswapd_wait``, ``pfmemalloc_wait``, ``reclaim_wait``
> + Workqueues used to synchronize memory reclaim tasks
> +
> +``nr_writeback_throttled``
> + Number of tasks that are throttled waiting on dirty pages to clean.
> +
> +``nr_reclaim_start``
> + Number of pages written while reclaim is throttled waiting for writeback.
> +
> +``kswapd_order``
> + Controls the order kswapd tries to reclaim
> +
> +``kswapd_highest_zoneidx``
> + The highest zone index to be reclaimed by kswapd
> +
> +``kswapd_failures``
> + Number of runs kswapd was unable to reclaim any pages
> +
> +``min_unmapped_pages``
> + Minimal number of unmapped file backed pages that cannot be reclaimed.
> + Determined by ``vm.min_unmapped_ratio`` sysctl. Only defined when
> + ``CONFIG_NUMA`` is enabled.
> +
> +``min_slab_pages``
> + Minimal number of SLAB pages that cannot be reclaimed. Determined by
> + ``vm.min_slab_ratio sysctl``. Only defined when ``CONFIG_NUMA`` is enabled
> +
> +``flags``
> + Flags controlling reclaim behavior.
> +
> +Compaction control
> +~~~~~~~~~~~~~~~~~~
> +
> +``kcompactd_max_order``
> + Page order that kcompactd should try to achieve.
> +
> +``kcompactd_highest_zoneidx``
> + The highest zone index to be compacted by kcompactd.
> +
> +``kcompactd_wait``
> + Workqueue used to synchronize memory compaction tasks.
> +
> +``kcompactd``
> + Per-node instance of kcompactd kernel thread.
> +
> +``proactive_compact_trigger``
> + Determines if proactive compaction is enabled. Controlled by
> + ``vm.compaction_proactiveness`` sysctl.
> +
> +Statistics
> +~~~~~~~~~~
> +
> +``per_cpu_nodestats``
> + Per-CPU VM statistics for the node
> +
> +``vm_stat``
> + VM statistics for the node.
> +
> +.. _zones:
> +
> +Zones
> +=====
> +
> +.. admonition:: Stub
> +
> + This section is incomplete. Please list and describe the appropriate fields.
> +
> +.. _pages:
> +
> +Pages
> +=====
> +
> +.. admonition:: Stub
> +
> + This section is incomplete. Please list and describe the appropriate fields.
> +
> +.. _folios:
> +
> +Folios
> +======
> +
> +.. admonition:: Stub
> +
> + This section is incomplete. Please list and describe the appropriate fields.
> +
> +.. _initialization:
> +
> +Initialization
> +==============
> +
> +.. admonition:: Stub
> +
> + This section is incomplete. Please list and describe the appropriate fields.
> --
> 2.35.1

--
Michal Hocko
SUSE Labs

\
 
 \ /
  Last update: 2023-03-26 23:39    [W:0.065 / U:0.080 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site