lkml.org 
[lkml]   [2023]   [Jan]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Date
SubjectRe: [PATCH v10 3/9] drm/display: Add Type-C switch helpers
Hi Jani,

Thanks for the review.

On Thu, Jan 12, 2023 at 4:37 PM Jani Nikula <jani.nikula@intel.com> wrote:
>
> On Thu, 12 Jan 2023, Pin-yen Lin <treapking@chromium.org> wrote:
> > Add helpers to register and unregister Type-C "switches" for bridges
> > capable of switching their output between two downstream devices.
> >
> > The helper registers USB Type-C mode switches when the "mode-switch"
> > and the "data-lanes" properties are available in Device Tree.
> >
> > Signed-off-by: Pin-yen Lin <treapking@chromium.org>
> > Tested-by: Chen-Yu Tsai <wenst@chromium.org>
> > Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
> > Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
> >
> > ---
> >
> > Changes in v10:
> > - Collected Reviewed-by and Tested-by tags
> > - Replaced "void *" with "typec_mux_set_fn_t" for mux_set callbacks
> > - Print out the node name when errors on parsing DT
> > - Use dev_dbg instead of dev_warn when no Type-C switch nodes available
> > - Made the return path of drm_dp_register_mode_switch clearer
> >
> > Changes in v8:
> > - Fixed the build issue when CONFIG_TYPEC=m
> > - Fixed some style issues
> >
> > Changes in v7:
> > - Extracted the common codes to a helper function
> > - New in v7
> >
> > drivers/gpu/drm/display/drm_dp_helper.c | 134 ++++++++++++++++++++++++
> > include/drm/display/drm_dp_helper.h | 17 +++
> > 2 files changed, 151 insertions(+)
> >
> > diff --git a/drivers/gpu/drm/display/drm_dp_helper.c b/drivers/gpu/drm/display/drm_dp_helper.c
> > index 16565a0a5da6..a2ec40a621cb 100644
> > --- a/drivers/gpu/drm/display/drm_dp_helper.c
> > +++ b/drivers/gpu/drm/display/drm_dp_helper.c
> > @@ -30,11 +30,13 @@
> > #include <linux/sched.h>
> > #include <linux/seq_file.h>
> > #include <linux/string_helpers.h>
> > +#include <linux/usb/typec_mux.h>
> > #include <linux/dynamic_debug.h>
> >
> > #include <drm/display/drm_dp_helper.h>
> > #include <drm/display/drm_dp_mst_helper.h>
> > #include <drm/drm_edid.h>
> > +#include <drm/drm_of.h>
> > #include <drm/drm_print.h>
> > #include <drm/drm_vblank.h>
> > #include <drm/drm_panel.h>
> > @@ -3891,3 +3893,135 @@ int drm_panel_dp_aux_backlight(struct drm_panel *panel, struct drm_dp_aux *aux)
> > EXPORT_SYMBOL(drm_panel_dp_aux_backlight);
> >
> > #endif
> > +
> > +#if IS_REACHABLE(CONFIG_TYPEC)
>
> I think IS_REACHABLE() is a workaround for not getting the Kconfig
> dependencies right. It allows configurations that silently just don't
> work, instead of warning about it at config time. It fixes a build
> issue, but trades it for an end user configuration issue that you don't
> get any feedback about, and is hard to figure out. It's for people who
> deal with build issues, but don't need to deal with user issues.
>
> BR,
> Jani.
>
I've added "depends on TYPEC || TYPEC=n" on the Kconfigs of its users
(i.e., anx7625 and it6505). I didn't do this on DRM_DISPLAY_DP_HELPER
because that stops all users of DRM_DISPLAY_DP_HELPER, which is a
quite generic helper file, from building TYPEC as a module.

Or, do you have any other suggestions on this? Move these functions to
a separate file?

>
>
> > +static int drm_dp_register_mode_switch(struct device *dev, struct device_node *node,
> > + struct drm_dp_typec_switch_desc *switch_desc,
> > + void *data, typec_mux_set_fn_t mux_set)
> > +{
> > + struct drm_dp_typec_port_data *port_data;
> > + struct typec_mux_desc mux_desc = {};
> > + char name[32];
> > + u32 dp_lanes[2];
> > + int ret, num_lanes, port_num = -1;
> > +
> > + num_lanes = drm_of_get_data_lanes_count(node, 0, 2);
> > + if (num_lanes <= 0) {
> > + dev_err(dev, "Error on getting data lanes count from %s: %d\n",
> > + node->name, num_lanes);
> > + return num_lanes;
> > + }
> > +
> > + ret = of_property_read_u32_array(node, "data-lanes", dp_lanes, num_lanes);
> > + if (ret) {
> > + dev_err(dev, "Failed to read the data-lanes variable from %s: %d\n",
> > + node->name, ret);
> > + return ret;
> > + }
> > +
> > + port_num = dp_lanes[0] / 2;
> > +
> > + port_data = &switch_desc->typec_ports[port_num];
> > + port_data->data = data;
> > + mux_desc.fwnode = &node->fwnode;
> > + mux_desc.drvdata = port_data;
> > + snprintf(name, sizeof(name), "%s-%u", node->name, port_num);
> > + mux_desc.name = name;
> > + mux_desc.set = mux_set;
> > +
> > + port_data->typec_mux = typec_mux_register(dev, &mux_desc);
> > + if (IS_ERR(port_data->typec_mux)) {
> > + ret = PTR_ERR(port_data->typec_mux);
> > + dev_err(dev, "Mode switch register for port %d failed: %d\n",
> > + port_num, ret);
> > +
> > + return ret;
> > + }
> > +
> > + return 0;
> > +}
> > +
> > +/**
> > + * drm_dp_register_typec_switches() - register Type-C switches
> > + * @dev: Device that registers Type-C switches
> > + * @port: Device node for the switch
> > + * @switch_desc: A Type-C switch descriptor
> > + * @data: Private data for the switches
> > + * @mux_set: Callback function for typec_mux_set
> > + *
> > + * This function registers USB Type-C switches for DP bridges that can switch
> > + * the output signal between their output pins.
> > + *
> > + * Currently only mode switches are implemented, and the function assumes the
> > + * given @port device node has endpoints with "mode-switch" property.
> > + * Register the endpoint as port 0 if the "data-lanes" property falls in 0/1,
> > + * and register it as port 1 if "data-lanes" falls in 2/3.
> > + */
> > +int drm_dp_register_typec_switches(struct device *dev, struct device_node *port,
> > + struct drm_dp_typec_switch_desc *switch_desc,
> > + void *data, typec_mux_set_fn_t mux_set)
> > +{
> > + struct device_node *sw;
> > + int ret;
> > +
> > + for_each_child_of_node(port, sw) {
> > + if (of_property_read_bool(sw, "mode-switch"))
> > + switch_desc->num_typec_switches++;
> > + }
> > +
> > + if (!switch_desc->num_typec_switches) {
> > + dev_dbg(dev, "No Type-C switches node found\n");
> > + return 0;
> > + }
> > +
> > + switch_desc->typec_ports = devm_kcalloc(
> > + dev, switch_desc->num_typec_switches,
> > + sizeof(struct drm_dp_typec_port_data), GFP_KERNEL);
> > +
> > + if (!switch_desc->typec_ports)
> > + return -ENOMEM;
> > +
> > + /* Register switches for each connector. */
> > + for_each_child_of_node(port, sw) {
> > + if (!of_property_read_bool(sw, "mode-switch"))
> > + continue;
> > + ret = drm_dp_register_mode_switch(dev, sw, switch_desc, data, mux_set);
> > + if (ret)
> > + goto err_unregister_typec_switches;
> > + }
> > +
> > + return 0;
> > +
> > +err_unregister_typec_switches:
> > + of_node_put(sw);
> > + drm_dp_unregister_typec_switches(switch_desc);
> > + dev_err(dev, "Failed to register mode switch: %d\n", ret);
> > + return ret;
> > +}
> > +EXPORT_SYMBOL(drm_dp_register_typec_switches);
> > +
> > +/**
> > + * drm_dp_unregister_typec_switches() - unregister Type-C switches
> > + * @switch_desc: A Type-C switch descriptor
> > + */
> > +void drm_dp_unregister_typec_switches(struct drm_dp_typec_switch_desc *switch_desc)
> > +{
> > + int i;
> > +
> > + for (i = 0; i < switch_desc->num_typec_switches; i++)
> > + typec_mux_unregister(switch_desc->typec_ports[i].typec_mux);
> > +}
> > +EXPORT_SYMBOL(drm_dp_unregister_typec_switches);
> > +#else
> > +void drm_dp_unregister_typec_switches(struct drm_dp_typec_switch_desc *switch_desc)
> > +{
> > +}
> > +EXPORT_SYMBOL(drm_dp_register_typec_switches);
> > +int drm_dp_register_typec_switches(struct device *dev, struct device_node *port,
> > + struct drm_dp_typec_switch_desc *switch_desc,
> > + void *data, typec_mux_set_fn_t mux_set)
> > +{
> > + return 0;
> > +}
> > +EXPORT_SYMBOL(drm_dp_unregister_typec_switches);
> > +#endif
> > diff --git a/include/drm/display/drm_dp_helper.h b/include/drm/display/drm_dp_helper.h
> > index ab55453f2d2c..5a3824f13b4e 100644
> > --- a/include/drm/display/drm_dp_helper.h
> > +++ b/include/drm/display/drm_dp_helper.h
> > @@ -25,6 +25,7 @@
> >
> > #include <linux/delay.h>
> > #include <linux/i2c.h>
> > +#include <linux/usb/typec_mux.h>
> >
> > #include <drm/display/drm_dp.h>
> > #include <drm/drm_connector.h>
> > @@ -763,4 +764,20 @@ bool drm_dp_downstream_rgb_to_ycbcr_conversion(const u8 dpcd[DP_RECEIVER_CAP_SIZ
> > const u8 port_cap[4], u8 color_spc);
> > int drm_dp_pcon_convert_rgb_to_ycbcr(struct drm_dp_aux *aux, u8 color_spc);
> >
> > +struct drm_dp_typec_port_data {
> > + struct typec_mux_dev *typec_mux;
> > + void *data;
> > + bool dp_connected;
> > +};
> > +
> > +struct drm_dp_typec_switch_desc {
> > + int num_typec_switches;
> > + struct drm_dp_typec_port_data *typec_ports;
> > +};
> > +
> > +void drm_dp_unregister_typec_switches(struct drm_dp_typec_switch_desc *switch_desc);
> > +int drm_dp_register_typec_switches(struct device *dev, struct device_node *port,
> > + struct drm_dp_typec_switch_desc *switch_desc,
> > + void *data, typec_mux_set_fn_t mux_set);
> > +
> > #endif /* _DRM_DP_HELPER_H_ */
>
> --
> Jani Nikula, Intel Open Source Graphics Center

Best regards,
Pin-yen

\
 
 \ /
  Last update: 2023-03-26 23:39    [W:0.119 / U:0.356 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site