lkml.org 
[lkml]   [2023]   [Jan]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
SubjectRe: linux-next - bnxt buffer overflow in strnlen
On Fri, Jan 13, 2023 at 04:08:21PM +0000, Niklas Cassel wrote:
> On Fri, Jan 13, 2023 at 04:59:19PM +0100, Niklas Cassel wrote:
> > On Tue, Sep 20, 2022 at 12:22:02PM -0700, Kees Cook wrote:
> > > Since the commits starting with c37495d6254c ("slab: add __alloc_size
> > > attributes for better bounds checking"), the compilers have runtime
> > > allocation size hints available in some places. This was immediately
> > > available to CONFIG_UBSAN_BOUNDS, but CONFIG_FORTIFY_SOURCE needed
> > > updating to explicitly make use the hints via the associated
> > > __builtin_dynamic_object_size() helper. Detect and use the builtin when
> > > it is available, increasing the accuracy of the mitigation. When runtime
> > > sizes are not available, __builtin_dynamic_object_size() falls back to
> > > __builtin_object_size(), leaving the existing bounds checking unchanged.
> > > [...]
> > Hello Kees,
> >
> > Unfortunately, this commit introduces a crash in the bnxt
> > ethernet driver when booting linux-next.

Hi! Thanks for the report. Notes below...

> > I haven't looked at the code in the bnxt ethernet driver,
> > I simply know that machine boots fine on v6.2.0-rc3,
> > but fails to boot with linux-next.
> >
> > So I started an automatic git bisect, which returned:
> > 439a1bcac648 ("fortify: Use __builtin_dynamic_object_size() when available")
> >
> > $ grep CC_VERSION .config
> > CONFIG_CC_VERSION_TEXT="gcc (GCC) 12.2.1 20221121 (Red Hat 12.2.1-4)"
> > CONFIG_GCC_VERSION=120201
> >
> > $ grep FORTIFY .config
> > CONFIG_ARCH_HAS_FORTIFY_SOURCE=y
> > CONFIG_FORTIFY_SOURCE=y
> >
> >
> > dmesg output:
> >
> > <0>[ 10.805253] detected buffer overflow in strnlen
> [...]
> > <4>[ 10.931470] Call Trace:
> > <6>[ 10.936317] ata9: SATA link down (SStatus 0 SControl 300)
> > <4>[ 10.936745] <TASK>
> > <4>[ 10.936745] bnxt_ethtool_init.cold+0x18/0x18

Are you able to run:

$ ./scripts/faddr2line vmlinux bnxt_ethtool_init.cold+0x18/0x18

to find the exact line it's failing on, just to be sure we're looking in
the right place?

There are a bunch of string functions being used in a loop
bnxt_ethtool_init(). Here's the code:

if (bp->num_tests > BNXT_MAX_TEST)
bp->num_tests = BNXT_MAX_TEST;
...
for (i = 0; i < bp->num_tests; i++) {
char *str = test_info->string[i];
char *fw_str = resp->test0_name + i * 32;

if (i == BNXT_MACLPBK_TEST_IDX) {
strcpy(str, "Mac loopback test (offline)");
} else if (i == BNXT_PHYLPBK_TEST_IDX) {
strcpy(str, "Phy loopback test (offline)");
} else if (i == BNXT_EXTLPBK_TEST_IDX) {
strcpy(str, "Ext loopback test (offline)");
} else if (i == BNXT_IRQ_TEST_IDX) {
strcpy(str, "Interrupt_test (offline)");
} else {
strscpy(str, fw_str, ETH_GSTRING_LEN);
strncat(str, " test", ETH_GSTRING_LEN - strlen(str));
if (test_info->offline_mask & (1 << i))
strncat(str, " (offline)",
ETH_GSTRING_LEN - strlen(str));
else
strncat(str, " (online)",
ETH_GSTRING_LEN - strlen(str));
}
}

The hardened strnlen() is used internally to the hardened strcpy() and
strscpy()'s source argument, and strncat()'s dest and source arguments.
The only non-literal source argument is fw_str.

The destination in this loop is always "str", which is test_info->string[i].
I'd expect "str" to always be processed as fixed size:

struct bnxt_test_info {
u8 offline_mask;
u16 timeout;
char string[BNXT_MAX_TEST][ETH_GSTRING_LEN];
};

#define ETH_GSTRING_LEN 32
#define BNXT_MAX_TEST 8

And the allocation matches that size:

test_info = kzalloc(sizeof(*bp->test_info), GFP_KERNEL);

(bp->test_info is, indeed struct bnxt_test_info too.)

The loop cannot reach BNXT_MAX_TEST. It looks like fw_str's size isn't
known dynamically, so that shouldn't be a change. (It's assigned from
a void * return.) So I suspect "str" ran off the end of the allocation,
which implies that "fw_str" must be >= ETH_GSTRING_LEN. This line looks
very suspicious:

char *fw_str = resp->test0_name + i * 32;

I also note that the return value of strscpy() is not checked...

Let's see...

struct hwrm_selftest_qlist_output {
...
char test0_name[32];
char test1_name[32];
char test2_name[32];
char test3_name[32];
char test4_name[32];
char test5_name[32];
char test6_name[32];
char test7_name[32];
...
};

Ew. So, yes, it's specifically reach past the end of the test0_name[]
array, *and* is may overflow the heap. Does this patch solve it for you?


diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c b/drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c
index cbf17fcfb7ab..ec573127b707 100644
--- a/drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c
+++ b/drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c
@@ -3969,7 +3969,7 @@ void bnxt_ethtool_init(struct bnxt *bp)
test_info->timeout = HWRM_CMD_TIMEOUT;
for (i = 0; i < bp->num_tests; i++) {
char *str = test_info->string[i];
- char *fw_str = resp->test0_name + i * 32;
+ char *fw_str = resp->test_name[i];

if (i == BNXT_MACLPBK_TEST_IDX) {
strcpy(str, "Mac loopback test (offline)");
@@ -3980,14 +3980,9 @@ void bnxt_ethtool_init(struct bnxt *bp)
} else if (i == BNXT_IRQ_TEST_IDX) {
strcpy(str, "Interrupt_test (offline)");
} else {
- strscpy(str, fw_str, ETH_GSTRING_LEN);
- strncat(str, " test", ETH_GSTRING_LEN - strlen(str));
- if (test_info->offline_mask & (1 << i))
- strncat(str, " (offline)",
- ETH_GSTRING_LEN - strlen(str));
- else
- strncat(str, " (online)",
- ETH_GSTRING_LEN - strlen(str));
+ snprintf(str, ETH_GSTRING_LEN, "%s test (%s)",
+ fw_str, test_info->offline_mask & (1 << i) ?
+ "offline" : "online");
}
}

diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt_hsi.h b/drivers/net/ethernet/broadcom/bnxt/bnxt_hsi.h
index 2686a714a59f..a5408879e077 100644
--- a/drivers/net/ethernet/broadcom/bnxt/bnxt_hsi.h
+++ b/drivers/net/ethernet/broadcom/bnxt/bnxt_hsi.h
@@ -10249,14 +10249,7 @@ struct hwrm_selftest_qlist_output {
u8 unused_0;
__le16 test_timeout;
u8 unused_1[2];
- char test0_name[32];
- char test1_name[32];
- char test2_name[32];
- char test3_name[32];
- char test4_name[32];
- char test5_name[32];
- char test6_name[32];
- char test7_name[32];
+ char test_name[8][32];
u8 eyescope_target_BER_support;
#define SELFTEST_QLIST_RESP_EYESCOPE_TARGET_BER_SUPPORT_BER_1E8_SUPPORTED 0x0UL
#define SELFTEST_QLIST_RESP_EYESCOPE_TARGET_BER_SUPPORT_BER_1E9_SUPPORTED 0x1UL




--
Kees Cook

\
 
 \ /
  Last update: 2023-03-26 23:41    [W:0.060 / U:0.476 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site