lkml.org 
[lkml]   [2023]   [Jan]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v9 00/27] dmaengine: dw-edma: Add RP/EP local DMA controllers support
Hello folks,

On Fri, Jan 13, 2023 at 08:13:42PM +0300, Serge Semin wrote:
> This is a final patchset in the series created in the framework of
> my Baikal-T1 PCIe/eDMA-related work:
>
> [1: Done v5] PCI: dwc: Various fixes and cleanups
> Link: https://lore.kernel.org/linux-pci/20220624143428.8334-1-Sergey.Semin@baikalelectronics.ru/
> Merged: kernel 6.0-rc1
> [2: Done v4] PCI: dwc: Add hw version and dma-ranges support
> Link: https://lore.kernel.org/linux-pci/20220624143947.8991-1-Sergey.Semin@baikalelectronics.ru/
> Merged: kernel 6.0-rc1
> [3: Done v7] PCI: dwc: Add generic resources and Baikal-T1 support
> Link: https://lore.kernel.org/linux-pci/20221113191301.5526-1-Sergey.Semin@baikalelectronics.ru/
> Merged: kernel 6.2-rc1
> [4: In-review v9] dmaengine: dw-edma: Add RP/EP local DMA controllers support
> Link: ---you are looking at it---
>
> Note it is very recommended to merge the patchsets in the same order as
> they are listed in the set above in order to have them applied smoothly.
> Since the patchsets 1-3 have already been merged into the mainline kernel
> this series can be applied via any DMA-engine or PCI repos.
>
> Here is a short summary regarding this patchset. The series starts with
> fixes patches. We discovered that the dw-edma-pcie.c driver incorrectly
> initializes the LL/DT base addresses for the platforms with not matching
> CPU and PCIe memory spaces. It is fixed by using the pci_bus_address()
> method to get a correct base address. After that you can find a series of
> the interleaved xfers fixes. It turned out the interleaved transfers
> implementation didn't work quite correctly from the very beginning for
> instance missing src/dst addresses initialization, etc. In the framework
> of the next two patches we suggest to add a new platform-specific
> callback - pci_address() and use it to convert the CPU address to the PCIe
> space address. It is at least required for the DW eDMA remote End-point
> setup on the platforms with not-matching CPU/PCIe address spaces. In case
> of the DW eDMA local RP/EP setup the conversion will be done automatically
> by the outbound iATU (if no DMA-bypass flag is specified for the
> corresponding iATU window). Then we introduce a set of the patches to make
> the DebugFS part of the code supporting the multi-eDMA controllers
> platforms. It starts with several cleanup patches and is closed joining
> the Read/Write channels into a single DMA-device as they originally should
> have been. After that you can find the patches with adding the non-atomic
> io-64 methods usage, dropping DT-region descriptors allocation, replacing
> chip IDs with the device name. In addition to that in order to have the
> eDMA embedded into the DW PCIe RP/EP supported we need to bypass the
> dma-ranges-based memory ranges mapping since in case of the root port DT
> node it's applicable for the peripheral PCIe devices only. Finally at the
> series closure we introduce a generic DW eDMA controller support being
> available in the DW PCIe Root Port/Endpoint driver.
>
> Link: https://lore.kernel.org/linux-pci/20220324014836.19149-1-Sergey.Semin@baikalelectronics.ru/
> Changelog v2:
> - Drop the patches:
> [PATCH 1/25] dmaengine: dw-edma: Drop dma_slave_config.direction field usage
> [PATCH 2/25] dmaengine: dw-edma: Fix eDMA Rd/Wr-channels and DMA-direction semantics
> since they are going to be merged in in the framework of the
> Frank's patchset.
> - Add a new patch: "dmaengine: dw-edma: Release requested IRQs on
> failure."
> - Drop __iomem qualifier from the struct dw_edma_debugfs_entry instance
> definition in the dw_edma_debugfs_u32_get() method. (@Manivannan)
> - Add a new patch: "dmaengine: dw-edma: Rename DebugFS dentry variables to
> 'dent'." (@Manivannan)
> - Slightly extend the eDMA name array size. (@Manivannan)
> - Change the specific DMA mapping comment a bit to being
> clearer. (@Manivannan)
> - Add a new patch: "PCI: dwc: Add generic iATU/eDMA CSRs space detection
> method."
> - Don't fail eDMA detection procedure if the DW eDMA driver couldn't probe
> device. That happens if the driver is disabled. (@Manivannan)
> - Add "dma" registers resource mapping procedure. (@Manivannan)
> - Move the eDMA CSRs space detection into the dw_pcie_map_detect() method.
> - Remove eDMA on the dw_pcie_ep_init() internal errors. (@Manivannan)
> - Remove eDMA in the dw_pcie_ep_exit() method.
> - Move the dw_pcie_edma_detect() method execution to the tail of the
> dw_pcie_ep_init() function.
>
> Link: https://lore.kernel.org/linux-pci/20220503225104.12108-1-Sergey.Semin@baikalelectronics.ru/
> Changelog v3:
> - Conditionally set dchan->dev->device.dma_coherent field since it can
> be missing on some platforms. (@Manivannan)
> - Drop the patch: "PCI: dwc: Add generic iATU/eDMA CSRs space detection
> method". A similar modification has been done in another patchset.
> - Add more comprehensive and less regression prune eDMA block detection
> procedure.
> - Drop the patch: "dma-direct: take dma-ranges/offsets into account in
> resource mapping". It will be separately reviewed.
> - Remove Manivannan tb tag from the modified patches.
> - Rebase onto the kernel v5.18.
>
> Link: https://lore.kernel.org/linux-pci/20220610091459.17612-1-Sergey.Semin@baikalelectronics.ru
> Changelog v4:
> - Rabase onto the laters Frank Li series:
> Link: https://lore.kernel.org/all/20220524152159.2370739-1-Frank.Li@nxp.com/
> - Add Vinod' Ab-tag.
> - Rebase onto the kernel v5.19-rcX.
>
> Link: https://lore.kernel.org/linux-pci/20220728142841.12305-1-Sergey.Semin@baikalelectronics.ru
> Changelog v5:
> - Just resend.
> - Rebase onto the kernel v6.0-rc2.
>
> Link: https://lore.kernel.org/linux-pci/20220822185332.26149-1-Sergey.Semin@baikalelectronics.ru
> Changelog v6:
> - Fix some patchlog and in-line comments misspells. (@Bjorn)
> - Directly call *_dma_configure() method on the DW eDMA channel child
> device used for the DMA buffers mapping. (@Robin)
> - Explicitly set the DMA-mask of the child device in the channel
> allocation proecedure. (@Robin)
> - Rebase onto the kernel v6.1-rc3.
>
> Link: https://lore.kernel.org/linux-pci/20221107210438.1515-1-Sergey.Semin@baikalelectronics.ru/
> Changelog v7:
> - Activate the mapping auto-detection procedure for IP-cores older than
> 5.40a. The viewport-based access has been removed since that
> version. (@Yoshihiro)
> - Drop the patch
> [PATCH v6 22/24] dmaengine: dw-edma: Bypass dma-ranges mapping for the local setup
> since the problem has been fixed in the commit f1ad5338a4d5 ("of: Fix
> "dma-ranges" handling for bus controllers"). (@Robin)
> - Add a new patch:
> [PATCH v7 23/25] PCI: dwc: Restore DMA-mask after MSI-data allocation
> (@Robin)
> - Add a new patch:
> [PATCH v7 24/25] PCI: bt1: Set 64-bit DMA-mask
> (@Robin)
>
> Link: https://lore.kernel.org/linux-pci/20221214235305.31744-1-Sergey.Semin@baikalelectronics.ru/
> Changelog v8:
> - Add a new patch:
> [PATCH v8 23/26] dmaengine: dw-edma: Relax driver config settings
> (@tbot)
> - Replace the patch
> [PATCH v7 23/25] PCI: dwc: Restore DMA-mask after MSI-data allocation
> with a new one:
> [PATCH v8 24/26] PCI: dwc: Set coherent DMA-mask on MSI-address allocation
> (@Robin, @Christoph)
>
> Link: https://lore.kernel.org/linux-pci/20221219144658.26620-1-Sergey.Semin@baikalelectronics.ru/
> Changelog v9:
> - Add a new patch:
> [PATCH v9 23/27] dmaengine: dw-edma: Add mem-mapped LL-entries support
> (@tbot)
> - Rebase onto the kernel 6.2-rc3.

This is currently the latest version of the patchset. There are
several new patches (suggested by @Yoshihiro, @Robin and @tbot) and a
few updates have been introduced since the last @Vinod' and
@Manivannan' reviews. Thus I had to drop their Rb/Tb-tags from the
cover-letter and from some of the patches. Other than that the series
seems to be ready to be merged in (@Robin already blessed the
DMA-mask-related patches). Since all the preceding patchsets have
already been mainlined it can be done via any repo: DMA-engine, PCI,
etc.

-Serge(y)

>
> Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
> Cc: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru>
> Cc: Pavel Parkhomenko <Pavel.Parkhomenko@baikalelectronics.ru>
> Cc: "Krzysztof Wilczyński" <kw@linux.com>
> Cc: caihuoqing <caihuoqing@baidu.com>
> Cc: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
> Cc: linux-pci@vger.kernel.org
> Cc: dmaengine@vger.kernel.org
> Cc: linux-kernel@vger.kernel.org
>
> Serge Semin (27):
> dmaengine: Fix dma_slave_config.dst_addr description
> dmaengine: dw-edma: Release requested IRQs on failure
> dmaengine: dw-edma: Convert ll/dt phys-address to PCIe bus/DMA address
> dmaengine: dw-edma: Fix missing src/dst address of the interleaved
> xfers
> dmaengine: dw-edma: Don't permit non-inc interleaved xfers
> dmaengine: dw-edma: Fix invalid interleaved xfers semantics
> dmaengine: dw-edma: Add CPU to PCIe bus address translation
> dmaengine: dw-edma: Add PCIe bus address getter to the remote EP
> glue-driver
> dmaengine: dw-edma: Drop chancnt initialization
> dmaengine: dw-edma: Fix DebugFS reg entry type
> dmaengine: dw-edma: Stop checking debugfs_create_*() return value
> dmaengine: dw-edma: Add dw_edma prefix to the DebugFS nodes descriptor
> dmaengine: dw-edma: Convert DebugFS descs to being kz-allocated
> dmaengine: dw-edma: Rename DebugFS dentry variables to 'dent'
> dmaengine: dw-edma: Simplify the DebugFS context CSRs init procedure
> dmaengine: dw-edma: Move eDMA data pointer to DebugFS node descriptor
> dmaengine: dw-edma: Join Write/Read channels into a single device
> dmaengine: dw-edma: Use DMA-engine device DebugFS subdirectory
> dmaengine: dw-edma: Use non-atomic io-64 methods
> dmaengine: dw-edma: Drop DT-region allocation
> dmaengine: dw-edma: Replace chip ID number with device name
> dmaengine: dw-edma: Skip cleanup procedure if no private data found
> dmaengine: dw-edma: Add mem-mapped LL-entries support
> dmaengine: dw-edma: Relax driver config settings
> PCI: dwc: Set coherent DMA-mask on MSI-address allocation
> PCI: bt1: Set 64-bit DMA-mask
> PCI: dwc: Add DW eDMA engine support
>
> drivers/dma/dw-edma/Kconfig | 5 +-
> drivers/dma/dw-edma/dw-edma-core.c | 196 ++++-----
> drivers/dma/dw-edma/dw-edma-core.h | 10 +-
> drivers/dma/dw-edma/dw-edma-pcie.c | 56 ++-
> drivers/dma/dw-edma/dw-edma-v0-core.c | 121 +++---
> drivers/dma/dw-edma/dw-edma-v0-core.h | 1 -
> drivers/dma/dw-edma/dw-edma-v0-debugfs.c | 372 ++++++++----------
> drivers/dma/dw-edma/dw-edma-v0-debugfs.h | 5 -
> drivers/pci/controller/dwc/pcie-bt1.c | 4 +
> .../pci/controller/dwc/pcie-designware-ep.c | 12 +-
> .../pci/controller/dwc/pcie-designware-host.c | 24 +-
> drivers/pci/controller/dwc/pcie-designware.c | 195 +++++++++
> drivers/pci/controller/dwc/pcie-designware.h | 21 +
> include/linux/dma/edma.h | 25 +-
> include/linux/dmaengine.h | 2 +-
> 15 files changed, 652 insertions(+), 397 deletions(-)
>
> --
> 2.39.0
>
>

\
 
 \ /
  Last update: 2023-03-26 23:41    [W:0.374 / U:0.036 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site