lkml.org 
[lkml]   [2023]   [Jan]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH] drm/panel: boe-tv101wum-nl6: Ensure DSI writes succeed during disable
Hi Stephen

On Fri, 6 Jan 2023 at 03:01, Stephen Boyd <swboyd@chromium.org> wrote:
>
> The unprepare sequence has started to fail after moving to panel bridge
> code in the msm drm driver (commit 007ac0262b0d ("drm/msm/dsi: switch to
> DRM_PANEL_BRIDGE")). You'll see messages like this in the kernel logs:
>
> panel-boe-tv101wum-nl6 ae94000.dsi.0: failed to set panel off: -22
>
> This is because boe_panel_enter_sleep_mode() needs an operating DSI link
> to set the panel into sleep mode. Performing those writes in the
> unprepare phase of bridge ops is too late, because the link has already
> been torn down by the DSI controller in post_disable, i.e. the PHY has
> been disabled, etc. See dsi_mgr_bridge_post_disable() for more details
> on the DSI .
>
> Split the unprepare function into a disable part and an unprepare part.
> For now, just the DSI writes to enter sleep mode are put in the disable
> function. This fixes the panel off routine and keeps the panel happy.

It is documented that the mipi_dsi_host_ops transfer function should
be called with the host in any state [1], so the host driver is
failing there.

This sounds like the same issue I was addressing in adding the
prepare_prev_first flag to drm_panel, and pre_enable_prev_first to
drm_bridge via [2].
Defining prepare_prev_first for your panel would result in the host
pre_enable being called before the panel prepare, and therefore the
transfer calls from boe_panel_init_dcs_cmd boe_panel_prepare won't be
relying on the DSI host powering up early. It will also call the panel
unprepare before the DSI host bridge post_disable is called, and
therefore the DSI host will still be powered up and the transfer won't
fail.

Actually I've just noted the comment at [3]. [2] is that framework fix
that means that the magic workaround isn't required, but it will
require this panel to opt in to the ordering change.

Cheers.
Dave

[1] https://www.kernel.org/doc/html/latest/gpu/drm-kms-helpers.html#c.mipi_dsi_host_ops
[2] https://patchwork.freedesktop.org/series/100252/
[3] https://github.com/torvalds/linux/blob/master/drivers/gpu/drm/msm/dsi/dsi_manager.c#L47

> My Wormdingler has an integrated touchscreen that stops responding to
> touch if the panel is only half disabled too. This patch fixes it. And
> finally, this saves power when the screen is off because without this
> fix the regulators for the panel are left enabled when nothing is being
> displayed on the screen.
>
> Fixes: 007ac0262b0d ("drm/msm/dsi: switch to DRM_PANEL_BRIDGE")
> Fixes: a869b9db7adf ("drm/panel: support for boe tv101wum-nl6 wuxga dsi video mode panel")
> Cc: yangcong <yangcong5@huaqin.corp-partner.google.com>
> Cc: Douglas Anderson <dianders@chromium.org>
> Cc: Jitao Shi <jitao.shi@mediatek.com>
> Cc: Sam Ravnborg <sam@ravnborg.org>
> Cc: Rob Clark <robdclark@chromium.org>
> Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
> Signed-off-by: Stephen Boyd <swboyd@chromium.org>
> ---
> drivers/gpu/drm/panel/panel-boe-tv101wum-nl6.c | 16 ++++++++++++----
> 1 file changed, 12 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/gpu/drm/panel/panel-boe-tv101wum-nl6.c b/drivers/gpu/drm/panel/panel-boe-tv101wum-nl6.c
> index 857a2f0420d7..c924f1124ebc 100644
> --- a/drivers/gpu/drm/panel/panel-boe-tv101wum-nl6.c
> +++ b/drivers/gpu/drm/panel/panel-boe-tv101wum-nl6.c
> @@ -1193,14 +1193,11 @@ static int boe_panel_enter_sleep_mode(struct boe_panel *boe)
> return 0;
> }
>
> -static int boe_panel_unprepare(struct drm_panel *panel)
> +static int boe_panel_disable(struct drm_panel *panel)
> {
> struct boe_panel *boe = to_boe_panel(panel);
> int ret;
>
> - if (!boe->prepared)
> - return 0;
> -
> ret = boe_panel_enter_sleep_mode(boe);
> if (ret < 0) {
> dev_err(panel->dev, "failed to set panel off: %d\n", ret);
> @@ -1209,6 +1206,16 @@ static int boe_panel_unprepare(struct drm_panel *panel)
>
> msleep(150);
>
> + return 0;
> +}
> +
> +static int boe_panel_unprepare(struct drm_panel *panel)
> +{
> + struct boe_panel *boe = to_boe_panel(panel);
> +
> + if (!boe->prepared)
> + return 0;
> +
> if (boe->desc->discharge_on_disable) {
> regulator_disable(boe->avee);
> regulator_disable(boe->avdd);
> @@ -1528,6 +1535,7 @@ static enum drm_panel_orientation boe_panel_get_orientation(struct drm_panel *pa
> }
>
> static const struct drm_panel_funcs boe_panel_funcs = {
> + .disable = boe_panel_disable,
> .unprepare = boe_panel_unprepare,
> .prepare = boe_panel_prepare,
> .enable = boe_panel_enable,
>
> base-commit: 1b929c02afd37871d5afb9d498426f83432e71c2
> --
> https://chromeos.dev
>

\
 
 \ /
  Last update: 2023-03-26 23:39    [W:0.197 / U:0.828 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site