lkml.org 
[lkml]   [2023]   [Jan]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v10 3/4] fpga: dfl: add basic support for DFHv1


On Tue, 10 Jan 2023, Andy Shevchenko wrote:

> On Mon, Jan 09, 2023 at 04:30:28PM -0800, matthew.gerlach@linux.intel.com wrote:
>> From: Matthew Gerlach <matthew.gerlach@linux.intel.com>
>>
>> Version 1 of the Device Feature Header (DFH) definition adds
>> functionality to the Device Feature List (DFL) bus.
>>
>> A DFHv1 header may have one or more parameter blocks that
>> further describes the HW to SW. Add support to the DFL bus
>> to parse the MSI-X parameter.
>>
>> The location of a feature's register set is explicitly
>> described in DFHv1 and can be relative to the base of the DFHv1
>> or an absolute address. Parse the location and pass the information
>> to DFL driver.
>
> ...
>
>> v10: change dfh_find_param to return size of parameter data in bytes
>
> The problem that might occur with this approach is byte ordering.
> When we have u64 items, we know that they all are placed in CPU
> ordering by the bottom layer. What's the contract now? Can it be
> a problematic? Please double check this (always keep in mind BE32
> as most interesting case for u64/unsigned long representation and
> other possible byte ordering outcomes).

A number of u64 items certainly states explicit alignment of the memory,
but I think byte ordering is a different issue.

The bottom layer, by design, is still enforcing a number u64 items under
the hood. So the contract has not changed. Changing units of size from
u64s to bytes was suggested to match the general practice of size of
memory being in bytes. I think the suggestion was made because the return
type for dfh_find_param() changed from u64* to void* in version 9, when
indirectly returning the size of the parameter data was introduced. So a
void * with a size in bytes makes sense. On the other hand, returning a
u64 * is a more precise reflection of the data alignment. I think the API
should be as follows:

/**
* dfh_find_param() - find parameter block for the given parameter id
* @dfl_dev: dfl device
* @param_id: id of dfl parameter
* @pcount: destination to store size of parameter data in u64 bit words
*
* Return: pointer to start of parameter data, PTR_ERR otherwise.
*/
u64 *dfh_find_param(struct dfl_device *dfl_dev, int param_id, size_t
*pcount)

Regarding byte ordering, Documentation/fpga/dfl.rst does not
currently mention endianness. All current HW implementations of DFL are
little-endian. I should add a statement in Documentation/fpga/dfl.rst
that fields in the Device Feature Header are little-endian.

Thanks for the feedback,
Matthew Gerlach

>
> --
> With Best Regards,
> Andy Shevchenko
>
>
>

\
 
 \ /
  Last update: 2023-03-26 23:35    [W:0.607 / U:1.212 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site