lkml.org 
[lkml]   [2023]   [Jan]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] mmc: sunxi-mmc: Fix clock refcount imbalance during unbind
On 8/15/22 05:11, Ulf Hansson wrote:
> On Wed, 10 Aug 2022 at 04:25, Samuel Holland <samuel@sholland.org> wrote:
>>
>> If the controller is suspended by runtime PM, the clock is already
>> disabled, so do not try to disable it again during removal. Use
>> pm_runtime_disable() to flush any pending runtime PM transitions.
>>
>> Fixes: 9a8e1e8cc2c0 ("mmc: sunxi: Add runtime_pm support")
>> Signed-off-by: Samuel Holland <samuel@sholland.org>
>> ---
>>
>> drivers/mmc/host/sunxi-mmc.c | 8 +++++---
>> 1 file changed, 5 insertions(+), 3 deletions(-)
>>
>> diff --git a/drivers/mmc/host/sunxi-mmc.c b/drivers/mmc/host/sunxi-mmc.c
>> index b16e12e62e72..3db9f32d6a7b 100644
>> --- a/drivers/mmc/host/sunxi-mmc.c
>> +++ b/drivers/mmc/host/sunxi-mmc.c
>> @@ -1492,9 +1492,11 @@ static int sunxi_mmc_remove(struct platform_device *pdev)
>> struct sunxi_mmc_host *host = mmc_priv(mmc);
>>
>> mmc_remove_host(mmc);
>> - pm_runtime_force_suspend(&pdev->dev);
>> - disable_irq(host->irq);
>> - sunxi_mmc_disable(host);
>
> Perhaps a better option than the below, would just be to drop the
> above calls to disable_irq() and sunxi_mmc_disable(), as that is
> already managed through the call to pm_runtime_force_suspend().

I like the idea, but it will not work for !CONFIG_PM builds, which this
driver currently supports.

Regards,
Samuel

>> + pm_runtime_disable(&pdev->dev);
>> + if (!pm_runtime_status_suspended(&pdev->dev)) {
>> + disable_irq(host->irq);
>> + sunxi_mmc_disable(host);
>> + }
>> dma_free_coherent(&pdev->dev, PAGE_SIZE, host->sg_cpu, host->sg_dma);
>> mmc_free_host(mmc);
>>
>
> Kind regards
> Uffe

\
 
 \ /
  Last update: 2023-03-26 23:24    [W:0.114 / U:0.708 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site