lkml.org 
[lkml]   [2022]   [Sep]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v5 19/21] hwmon: (mr75203) parse temperature coefficients from device-tree
Date
Use thermal coefficients from the device tree if they exist.
Otherwise, use default values according to the series (5 or 6).
All coefficients can be used or only part of them.

The coefficients shall be used for fine tuning the default values since
coefficients can vary between product and product.

Signed-off-by: Eliav Farber <farbere@amazon.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
---
V4 -> V3:
- Replace of_property_read_u32() with device_property_read_u32().
- Fix "Code shouldn't be a YAML validator".
- Read directly to ts_coeff-> parameter to avoid conditional if.

drivers/hwmon/mr75203.c | 9 +++++++++
1 file changed, 9 insertions(+)

diff --git a/drivers/hwmon/mr75203.c b/drivers/hwmon/mr75203.c
index bbb59dd7e7cb..07668545c3ae 100644
--- a/drivers/hwmon/mr75203.c
+++ b/drivers/hwmon/mr75203.c
@@ -719,6 +719,15 @@ static int pvt_set_temp_coeff(struct device *dev, struct pvt_device *pvt)

dev_dbg(dev, "temperature sensor series = %u\n", series);

+ /* Override ts-coeff-h/g/j/cal5 if they are defined. */
+ device_property_read_u32(dev, "moortec,ts-coeff-h", &ts_coeff->h);
+ device_property_read_u32(dev, "moortec,ts-coeff-g", &ts_coeff->g);
+ device_property_read_u32(dev, "moortec,ts-coeff-j", &ts_coeff->j);
+ device_property_read_u32(dev, "moortec,ts-coeff-cal5", &ts_coeff->cal5);
+
+ dev_dbg(dev, "ts-coeff: h = %u, g = %u, j = %d, cal5 = %u\n",
+ ts_coeff->h, ts_coeff->g, ts_coeff->j, ts_coeff->cal5);
+
return 0;
}

--
2.37.1
\
 
 \ /
  Last update: 2022-09-08 17:27    [W:0.121 / U:0.788 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site