lkml.org 
[lkml]   [2022]   [Sep]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH v3] regulator: dt-bindings: qcom,rpmh: Indicate regulator-allow-set-load dependencies
From
On 08/09/2022 16:38, Doug Anderson wrote:
>
> From looking at the source code of Linux:
>
> * allow-set-load basically says whether the core regulator framework
> even pays attention when drivers specify how much load they're using.
>
> * On RPM then if allow-set-load is set then we'll sum up all of the
> load requests from clients and pass it to hardware.
>
> * On RPMH, if allow-set-load is set then we'll sum up all the load
> requests, translate that to a mode, validate it against the set of
> "allowable" modes, and if it's valid then pass it to hardware.

OK, makes sense.

Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

Best regards,
Krzysztof

\
 
 \ /
  Last update: 2022-09-08 16:50    [W:0.059 / U:0.040 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site