lkml.org 
[lkml]   [2022]   [Sep]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
SubjectRe: [PATCH v4 12/13] clk: microchip: mpfs: convert periph_clk to clk_gate
Date
On 30.08.2022 15:52, Conor Dooley wrote:
> With the reset code moved to the recently added reset controller, there
> is no need for custom ops any longer. Remove the custom ops and the
> custom struct by converting to a clk_gate.
>
> Reviewed-by: Daire McNamara <daire.mcnamara@microchip.com>
> Signed-off-by: Conor Dooley <conor.dooley@microchip.com>

Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>


> ---
> drivers/clk/microchip/clk-mpfs.c | 72 +++-----------------------------
> 1 file changed, 6 insertions(+), 66 deletions(-)
>
> diff --git a/drivers/clk/microchip/clk-mpfs.c b/drivers/clk/microchip/clk-mpfs.c
> index 88a200e88e54..fa46176eb9ca 100644
> --- a/drivers/clk/microchip/clk-mpfs.c
> +++ b/drivers/clk/microchip/clk-mpfs.c
> @@ -58,19 +58,11 @@ struct mpfs_cfg_hw_clock {
> u32 reg_offset;
> };
>
> -struct mpfs_periph_clock {
> - void __iomem *reg;
> - u8 shift;
> -};
> -
> struct mpfs_periph_hw_clock {
> - struct mpfs_periph_clock periph;
> - struct clk_hw hw;
> + struct clk_gate periph;
> unsigned int id;
> };
>
> -#define to_mpfs_periph_clk(_hw) container_of(_hw, struct mpfs_periph_hw_clock, hw)
> -
> /*
> * mpfs_clk_lock prevents anything else from writing to the
> * mpfs clk block while a software locked register is being written.
> @@ -273,64 +265,12 @@ static int mpfs_clk_register_cfgs(struct device *dev, struct mpfs_cfg_hw_clock *
> * peripheral clocks - devices connected to axi or ahb buses.
> */
>
> -static int mpfs_periph_clk_enable(struct clk_hw *hw)
> -{
> - struct mpfs_periph_hw_clock *periph_hw = to_mpfs_periph_clk(hw);
> - struct mpfs_periph_clock *periph = &periph_hw->periph;
> - u32 reg, val;
> - unsigned long flags;
> -
> - spin_lock_irqsave(&mpfs_clk_lock, flags);
> -
> - reg = readl_relaxed(periph->reg);
> - val = reg | (1u << periph->shift);
> - writel_relaxed(val, periph->reg);
> -
> - spin_unlock_irqrestore(&mpfs_clk_lock, flags);
> -
> - return 0;
> -}
> -
> -static void mpfs_periph_clk_disable(struct clk_hw *hw)
> -{
> - struct mpfs_periph_hw_clock *periph_hw = to_mpfs_periph_clk(hw);
> - struct mpfs_periph_clock *periph = &periph_hw->periph;
> - u32 reg, val;
> - unsigned long flags;
> -
> - spin_lock_irqsave(&mpfs_clk_lock, flags);
> -
> - reg = readl_relaxed(periph->reg);
> - val = reg & ~(1u << periph->shift);
> - writel_relaxed(val, periph->reg);
> -
> - spin_unlock_irqrestore(&mpfs_clk_lock, flags);
> -}
> -
> -static int mpfs_periph_clk_is_enabled(struct clk_hw *hw)
> -{
> - struct mpfs_periph_hw_clock *periph_hw = to_mpfs_periph_clk(hw);
> - struct mpfs_periph_clock *periph = &periph_hw->periph;
> - u32 reg;
> -
> - reg = readl_relaxed(periph->reg);
> - if (reg & (1u << periph->shift))
> - return 1;
> -
> - return 0;
> -}
> -
> -static const struct clk_ops mpfs_periph_clk_ops = {
> - .enable = mpfs_periph_clk_enable,
> - .disable = mpfs_periph_clk_disable,
> - .is_enabled = mpfs_periph_clk_is_enabled,
> -};
> -
> #define CLK_PERIPH(_id, _name, _parent, _shift, _flags) { \
> .id = _id, \
> - .periph.shift = _shift, \
> - .hw.init = CLK_HW_INIT_HW(_name, _parent, &mpfs_periph_clk_ops, \
> + .periph.bit_idx = _shift, \
> + .periph.hw.init = CLK_HW_INIT_HW(_name, _parent, &clk_gate_ops, \
> _flags), \
> + .periph.lock = &mpfs_clk_lock, \
> }
>
> #define PARENT_CLK(PARENT) (&mpfs_cfg_clks[CLK_##PARENT].cfg.hw)
> @@ -390,13 +330,13 @@ static int mpfs_clk_register_periphs(struct device *dev, struct mpfs_periph_hw_c
> struct mpfs_periph_hw_clock *periph_hw = &periph_hws[i];
>
> periph_hw->periph.reg = data->base + REG_SUBBLK_CLOCK_CR;
> - ret = devm_clk_hw_register(dev, &periph_hw->hw);
> + ret = devm_clk_hw_register(dev, &periph_hw->periph.hw);
> if (ret)
> return dev_err_probe(dev, ret, "failed to register clock id: %d\n",
> periph_hw->id);
>
> id = periph_hws[i].id;
> - data->hw_data.hws[id] = &periph_hw->hw;
> + data->hw_data.hws[id] = &periph_hw->periph.hw;
> }
>
> return 0;

\
 
 \ /
  Last update: 2022-09-08 08:49    [W:0.139 / U:0.080 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site