lkml.org 
[lkml]   [2022]   [Sep]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH v2 00/41] drm: Analog TV Improvements
From
Hi Maxime,

Am 05.09.22 um 16:57 schrieb Maxime Ripard:
> On Fri, Sep 02, 2022 at 01:28:16PM +0200, Noralf Trønnes wrote:
>>
>> Den 01.09.2022 21.35, skrev Noralf Trønnes:
>>>
>>> I have finally found a workaround for my kernel hangs.
>>>
>>> Dom had a look at my kernel and found that the VideoCore was fine, and
>>> he said this:
>>>
>>>> That suggests cause of lockup was on arm side rather than VC side.
>>>>
>>>> But it's hard to diagnose further. Once you've had a peripheral not
>>>> respond, the AXI bus locks up and no further operations are possible.
>>>> Usual causes of this are required clocks being stopped or domains
>>>> disabled and then trying to access the hardware.
>>>>
>>> So when I got this on my 64-bit build:
>>>
>>> [ 166.702171] SError Interrupt on CPU1, code 0x00000000bf000002 -- SError
>>> [ 166.702187] CPU: 1 PID: 8 Comm: kworker/u8:0 Tainted: G W
>>> 5.19.0-rc6-00096-gba7973977976-dirty #1
>>> [ 166.702200] Hardware name: Raspberry Pi 4 Model B Rev 1.1 (DT)
>>> [ 166.702206] Workqueue: events_freezable_power_ thermal_zone_device_check
>>> [ 166.702231] pstate: 200000c5 (nzCv daIF -PAN -UAO -TCO -DIT -SSBS
>>> BTYPE=--)
>>> [ 166.702242] pc : regmap_mmio_read32le+0x10/0x28
>>> [ 166.702261] lr : regmap_mmio_read+0x44/0x70
>>> ...
>>> [ 166.702606] bcm2711_get_temp+0x58/0xb0 [bcm2711_thermal]
>>>
>>> I wondered if that reg read was stalled due to a clock being stopped.
>>>
>>> Lo and behold, disabling runtime pm and keeping the vec clock running
>>> all the time fixed it[1].
>>>
>>> I don't know what the problem is, but at least I can now test this patchset.
>>>
>>> [1] https://gist.github.com/notro/23b984e7fa05cfbda2db50a421cac065
>>>
>> It turns out I didn't have to disable runtime pm:
>> https://gist.github.com/notro/0adcfcb12460b54e54458afe11dc8ea2
> If the bcm2711_thermal IP needs that clock to be enabled, it should grab
> a reference itself, but it looks like even the device tree binding
> doesn't ask for one.
The missing clock in the device tree binding is expected, because
despite of the code there is not much information about the BCM2711
clock tree. But i'm skeptical that the AVS IP actually needs the VEC
clock, i think it's more likely that the VEC clock parent is changed and
that cause this issue. I could take care of the bcm2711 binding & driver
if i know which clock is really necessary.
>
> Maxime
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

\
 
 \ /
  Last update: 2022-09-07 12:37    [W:0.175 / U:0.032 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site