lkml.org 
[lkml]   [2022]   [Sep]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    /
    Date
    From
    SubjectRe: [PATCH v6 00/43] Allwinner A31/A83T MIPI CSI-2 and A31 ISP / CSI Rework
    Hi Hans,

    On Wed 07 Sep 22, 10:47, Hans Verkuil wrote:
    > Hi Paul,
    >
    > On 26/08/2022 20:31, Paul Kocialkowski wrote:
    > > This part only concerns the rework of the CSI driver to support the MIPI CSI-2
    > > and ISP workflows.
    > >
    > > Very few patches have not received any review at this point and the whole
    > > thing looks good to go. Since this multi-part series has been going on for a
    > > while, it would be great to see it merged soon!
    >
    > Testing with just patches 1-15 gives me these kerneldoc results:
    >
    > kerneldoc: WARNINGS
    > drivers/media/platform/sunxi/sun6i-csi/sun6i_csi.h:79: warning: Function parameter or member 'csi_dev' not described in 'sun6i_csi_is_format_supported'
    > drivers/media/platform/sunxi/sun6i-csi/sun6i_csi.h:79: warning: Excess function parameter 'csi' description in 'sun6i_csi_is_format_supported'
    > drivers/media/platform/sunxi/sun6i-csi/sun6i_csi.h:86: warning: Function parameter or member 'csi_dev' not described in 'sun6i_csi_set_power'
    > drivers/media/platform/sunxi/sun6i-csi/sun6i_csi.h:86: warning: Excess function parameter 'csi' description in 'sun6i_csi_set_power'
    > drivers/media/platform/sunxi/sun6i-csi/sun6i_csi.h:94: warning: Function parameter or member 'csi_dev' not described in 'sun6i_csi_update_config'
    > drivers/media/platform/sunxi/sun6i-csi/sun6i_csi.h:94: warning: Excess function parameter 'csi' description in 'sun6i_csi_update_config'
    > drivers/media/platform/sunxi/sun6i-csi/sun6i_csi.h:102: warning: Function parameter or member 'csi_dev' not described in 'sun6i_csi_update_buf_addr'
    > drivers/media/platform/sunxi/sun6i-csi/sun6i_csi.h:102: warning: Excess function parameter 'csi' description in 'sun6i_csi_update_buf_addr'
    > drivers/media/platform/sunxi/sun6i-csi/sun6i_csi.h:109: warning: Function parameter or member 'csi_dev' not described in 'sun6i_csi_set_stream'
    > drivers/media/platform/sunxi/sun6i-csi/sun6i_csi.h:109: warning: Excess function parameter 'csi' description in 'sun6i_csi_set_stream'
    >
    > If this is caused by just 1 or 2 patches, then please post a v6.1 version of just
    > those patches fixing this. Otherwise perhaps a v7 is needed.

    Only a single patch was concerned by the change so I've sent it as v6.1.

    It looks like some return code descriptions were also missing so I've added
    them in as well and updated the commit log.

    Cheers,

    Paul

    > Regards,
    >
    > Hans
    >
    > >
    > > Changes since v5:
    > > - Rebased on latest media tree;
    > > - Switched to using media_pad_remote_pad_first;
    > > - Switched to using media_pad_remote_pad_unique.
    > >
    > > Changes since v4:
    > > - Removed the v4l2 controls handler from the driver;
    > > - Removed the info message about video device registration;
    > > - Fixed "literature" typos;
    > > - Moved patches dependent on the ISP driver to its dedicated series;
    > > - Rebased on the latest media tree;
    > > - Added collected tags;
    > >
    > > Changes since v3:
    > > - Updated Kconfig to follow the latest media-wide changes;
    > > - Rebased on latest changes to the driver (JPEG/sRGB colorspaces);
    > > - Added helper to get a single enabled link for an entity's pad, to replace
    > > source selection at link_validate time and select the remote source at
    > > stream on time instead;
    > > - Kept clock-managed regmap mmio;
    > > - Added collected review tags;
    > > - Various cosmetic cleanups;
    > >
    > > Changes since all-in-one v2:
    > > - Reworked capture video device registration, which stays in the main path.
    > > - Reworked async subdev handling with a dedicated structure holding the
    > > corresponding source to avoid matching in the driver;
    > > - Added mutex for mbus format serialization;
    > > - Remove useless else in link_validate;
    > > - Reworked commit logs to include missing information;
    > > - Cleaned up Kconfig, added PM dependency;
    > > - Moved platform-specific clock rate to of match data;
    > > - Added collected Reviewed-by tags;
    > > - Updated copyright years;
    > >
    > > Paul Kocialkowski (43):
    > > media: sun6i-csi: Define and use driver name and (reworked)
    > > description
    > > media: sun6i-csi: Refactor main driver data structures
    > > media: sun6i-csi: Tidy up platform code
    > > media: sun6i-csi: Always set exclusive module clock rate
    > > media: sun6i-csi: Define and use variant to get module clock rate
    > > media: sun6i-csi: Use runtime pm for clocks and reset
    > > media: sun6i-csi: Tidy up Kconfig
    > > media: sun6i-csi: Tidy up v4l2 code
    > > media: sun6i-csi: Tidy up video code
    > > media: sun6i-csi: Pass and store csi device directly in video code
    > > media: sun6i-csi: Register the media device after creation
    > > media: sun6i-csi: Remove controls handler from the driver
    > > media: sun6i-csi: Add media ops with link notify callback
    > > media: sun6i-csi: Introduce and use video helper functions
    > > media: sun6i-csi: Move csi buffer definition to main header file
    > > media: sun6i-csi: Add bridge v4l2 subdev with port management
    > > media: sun6i-csi: Rename sun6i_video to sun6i_csi_capture
    > > media: sun6i-csi: Add capture state using vsync for page flip
    > > media: sun6i-csi: Rework register definitions, invert misleading
    > > fields
    > > media: sun6i-csi: Add dimensions and format helpers to capture
    > > media: sun6i-csi: Implement address configuration without indirection
    > > media: sun6i-csi: Split stream sequences and irq code in capture
    > > media: sun6i-csi: Move power management to runtime pm in capture
    > > media: sun6i-csi: Move register configuration to capture
    > > media: sun6i-csi: Rework capture format management with helper
    > > media: sun6i-csi: Remove custom format helper and rework configure
    > > media: sun6i-csi: Add bridge dimensions and format helpers
    > > media: sun6i-csi: Get mbus code from bridge instead of storing it
    > > media: sun6i-csi: Tidy capture configure code
    > > media: sun6i-csi: Introduce bridge format structure, list and helper
    > > media: sun6i-csi: Introduce capture format structure, list and helper
    > > media: sun6i-csi: Configure registers from format tables
    > > media: sun6i-csi: Introduce format match structure, list and helper
    > > media: sun6i-csi: Implement capture link validation with logic
    > > media: sun6i-csi: Get bridge subdev directly in capture stream ops
    > > media: sun6i-csi: Move hardware control to the bridge
    > > media: sun6i-csi: Rename the capture video device to sun6i-csi-capture
    > > media: sun6i-csi: Cleanup headers and includes, update copyright lines
    > > media: sun6i-csi: Add support for MIPI CSI-2 to the bridge code
    > > media: sun6i-csi: Only configure capture when streaming
    > > media: sun6i-csi: Add extra checks to the interrupt routine
    > > media: sun6i-csi: Request a shared interrupt
    > > MAINTAINERS: Add myself as sun6i-csi maintainer and rename/move entry
    > >
    > > MAINTAINERS | 17 +-
    > > .../media/platform/sunxi/sun6i-csi/Kconfig | 12 +-
    > > .../media/platform/sunxi/sun6i-csi/Makefile | 2 +-
    > > .../platform/sunxi/sun6i-csi/sun6i_csi.c | 1027 ++++------------
    > > .../platform/sunxi/sun6i-csi/sun6i_csi.h | 149 +--
    > > .../sunxi/sun6i-csi/sun6i_csi_bridge.c | 844 +++++++++++++
    > > .../sunxi/sun6i-csi/sun6i_csi_bridge.h | 69 ++
    > > .../sunxi/sun6i-csi/sun6i_csi_capture.c | 1089 +++++++++++++++++
    > > .../sunxi/sun6i-csi/sun6i_csi_capture.h | 88 ++
    > > .../platform/sunxi/sun6i-csi/sun6i_csi_reg.h | 362 +++---
    > > .../platform/sunxi/sun6i-csi/sun6i_video.c | 685 -----------
    > > .../platform/sunxi/sun6i-csi/sun6i_video.h | 38 -
    > > 12 files changed, 2551 insertions(+), 1831 deletions(-)
    > > create mode 100644 drivers/media/platform/sunxi/sun6i-csi/sun6i_csi_bridge.c
    > > create mode 100644 drivers/media/platform/sunxi/sun6i-csi/sun6i_csi_bridge.h
    > > create mode 100644 drivers/media/platform/sunxi/sun6i-csi/sun6i_csi_capture.c
    > > create mode 100644 drivers/media/platform/sunxi/sun6i-csi/sun6i_csi_capture.h
    > > delete mode 100644 drivers/media/platform/sunxi/sun6i-csi/sun6i_video.c
    > > delete mode 100644 drivers/media/platform/sunxi/sun6i-csi/sun6i_video.h
    > >
    >

    --
    Paul Kocialkowski, Bootlin
    Embedded Linux and kernel engineering
    https://bootlin.com
    [unhandled content-type:application/pgp-signature]
    \
     
     \ /
      Last update: 2022-09-07 12:04    [W:4.064 / U:0.072 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site