lkml.org 
[lkml]   [2022]   [Sep]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v1 4/5] fpga: dfl: add generic support for MSIX interrupts


On Tue, 6 Sep 2022, Andy Shevchenko wrote:

> On Tue, Sep 06, 2022 at 12:04:25PM -0700, matthew.gerlach@linux.intel.com wrote:
>> From: Matthew Gerlach <matthew.gerlach@linux.intel.com>
>>
>> Define and use a DFHv1 parameter to add generic support for MSIX
>> interrupts for DFL devices.
>
> ...
>
>> + if (fid != FEATURE_ID_AFU && fid != PORT_FEATURE_ID_ERROR &&
>> + fid != PORT_FEATURE_ID_UINT && fid != FME_FEATURE_ID_GLOBAL_ERR) {
>> + v = readq(base);
>> + v = FIELD_GET(DFH_VERSION, v);
>> +
>> + if (v == 1) {
>> + v = readq(base + DFHv1_CSR_SIZE_GRP);
>
> I am already lost what v keeps...
>
> Perhaps
>
> v = readq(base);
> switch (FIELD_GET(DFH_VERSION, v)) {
> case 1:
> ...
> break;
> }

How about?
if (FIELD_GET(DFH_VERSION, readq(base)) == 1) {
...
}
>
>> + if (FIELD_GET(DFHv1_CSR_SIZE_GRP_HAS_PARAMS, v)) {
>
> void __iomem *v1hdr = base + DFHv1_PARAM_HDR;
>
>> + off = dfl_find_param(base + DFHv1_PARAM_HDR, ofst,
>> + DFHv1_PARAM_ID_MSIX);
>
> off = dfl_find_param(v1hdr, ofst, DFHv1_PARAM_ID_MSIX);
>
>> + if (off >= 0) {
>> + ibase = readl(base + DFHv1_PARAM_HDR +
>> + off + DFHv1_PARAM_MSIX_STARTV);
>> + inr = readl(base + DFHv1_PARAM_HDR +
>> + off + DFHv1_PARAM_MSIX_NUMV);
>
> ibase = readl(v1hdr + off + DFHv1_PARAM_MSIX_STARTV);
> inr = readl(v1hdr + off + DFHv1_PARAM_MSIX_NUMV);
>
>> + dev_dbg(binfo->dev, "%s start %d num %d fid 0x%x\n",
>> + __func__, ibase, inr, fid);
>
> No __func__ for dev_dbg(). Dynamic debug has this feature at runtime!
>
>> + }
>> + }
>> + }
>> + }
>
> ...
>
>> +/*
>
> If it's a kernel doc, make it to be parsable as a such.

Yes, the intention is kernel doc. Thanks for the feedback. I
will fix this and add the newline as suggested below.

Matthew Gerlach

>
>> + * dfl_find_param() - find the offset of the given parameter
>> + * @base: base pointer to start of dfl parameters in DFH
>> + * @max: maximum offset to search
>> + * @param: id of dfl parameter
>> + *
>> + * Return: positive offset on success, negative error code otherwise.
>> + */
>> +int dfl_find_param(void __iomem *base, resource_size_t max, int param);
>
> + blank line.
>
>> #endif /* __LINUX_DFL_H */
>
> --
> With Best Regards,
> Andy Shevchenko
>
>
>

\
 
 \ /
  Last update: 2022-09-07 23:37    [W:2.318 / U:0.008 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site