lkml.org 
[lkml]   [2022]   [Sep]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH net-next v3 2/2] ARM: dts: aspeed: elbert: Enable mac3 controller
From


On 9/6/2022 10:44 PM, rentao.bupt@gmail.com wrote:
> From: Tao Ren <rentao.bupt@gmail.com>
>
> Enable mac3 controller in Elbert dts: Elbert MAC3 is connected to the
> BCM53134P onboard switch's IMP_RGMII port directly (fixed link, no PHY
> between BMC MAC and BCM53134P).
>
> Note: BMC's mdio0 controller is connected to BCM53134P's MDIO interface,
> and the MDIO channel will be enabled later, when BCM53134 is added to
> "bcm53xx" DSA driver.
>
> Signed-off-by: Tao Ren <rentao.bupt@gmail.com>

Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
--
Florian

\
 
 \ /
  Last update: 2022-09-07 20:47    [W:0.081 / U:0.032 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site