lkml.org 
[lkml]   [2022]   [Sep]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 5.19 063/155] powerpc/rtas: Fix RTAS MSR[HV] handling for Cell
Date
From: Michael Ellerman <mpe@ellerman.id.au>

commit 91926d8b7e71aaf5f84f0cf208fc5a8b7a761050 upstream.

The semi-recent changes to MSR handling when entering RTAS (firmware)
cause crashes on IBM Cell machines. An example trace:

kernel tried to execute user page (2fff01a8) - exploit attempt? (uid: 0)
BUG: Unable to handle kernel instruction fetch
Faulting instruction address: 0x2fff01a8
Oops: Kernel access of bad area, sig: 11 [#1]
BE PAGE_SIZE=64K MMU=Hash SMP NR_CPUS=4 NUMA Cell
Modules linked in:
CPU: 0 PID: 0 Comm: swapper/0 Tainted: G W 6.0.0-rc2-00433-gede0a8d3307a #207
NIP: 000000002fff01a8 LR: 0000000000032608 CTR: 0000000000000000
REGS: c0000000015236b0 TRAP: 0400 Tainted: G W (6.0.0-rc2-00433-gede0a8d3307a)
MSR: 0000000008001002 <ME,RI> CR: 00000000 XER: 20000000
...
NIP 0x2fff01a8
LR 0x32608
Call Trace:
0xc00000000143c5f8 (unreliable)
.rtas_call+0x224/0x320
.rtas_get_boot_time+0x70/0x150
.read_persistent_clock64+0x114/0x140
.read_persistent_wall_and_boot_offset+0x24/0x80
.timekeeping_init+0x40/0x29c
.start_kernel+0x674/0x8f0
start_here_common+0x1c/0x50

Unlike PAPR platforms where RTAS is only used in guests, on the IBM Cell
machines Linux runs with MSR[HV] set but also uses RTAS, provided by
SLOF.

Fix it by copying the MSR[HV] bit from the MSR value we've just read
using mfmsr into the value used for RTAS.

It seems like we could also fix it using an #ifdef CELL to set MSR[HV],
but that doesn't work because it's possible to build a single kernel
image that runs on both Cell native and pseries.

Fixes: b6b1c3ce06ca ("powerpc/rtas: Keep MSR[RI] set when calling RTAS")
Cc: stable@vger.kernel.org # v5.19+
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Reviewed-by: Jordan Niethe <jniethe5@gmail.com>
Link: https://lore.kernel.org/r/20220823115952.1203106-2-mpe@ellerman.id.au
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
arch/powerpc/kernel/rtas_entry.S | 4 ++++
1 file changed, 4 insertions(+)

--- a/arch/powerpc/kernel/rtas_entry.S
+++ b/arch/powerpc/kernel/rtas_entry.S
@@ -109,8 +109,12 @@ __enter_rtas:
* its critical regions (as specified in PAPR+ section 7.2.1). MSR[S]
* is not impacted by RFI_TO_KERNEL (only urfid can unset it). So if
* MSR[S] is set, it will remain when entering RTAS.
+ * If we're in HV mode, RTAS must also run in HV mode, so extract MSR_HV
+ * from the saved MSR value and insert into the value RTAS will use.
*/
+ extrdi r0, r6, 1, 63 - MSR_HV_LG
LOAD_REG_IMMEDIATE(r6, MSR_ME | MSR_RI)
+ insrdi r6, r0, 1, 63 - MSR_HV_LG

li r0,0
mtmsrd r0,1 /* disable RI before using SRR0/1 */

\
 
 \ /
  Last update: 2022-09-06 16:11    [W:0.535 / U:0.660 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site