lkml.org 
[lkml]   [2022]   [Sep]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH v1 3/3] riscv: dts: microchip: add a devicetree for the Aldec TySoM
From
On 06/09/2022 14:15, Conor Dooley wrote:
> The TySOM-M-MPFS250 is a compact SoC prototyping board featuring
> a Microchip PolarFire SoC MPFS250T-FCG1152. Features include:
> - 16 GB FPGA DDR4
> - 16 GB MSS DDR4 with ECC
> - eMMC
> - SPI flash memory
> - 2x Ethernet 10/100/1000
> - USB 2.0
> - PCIe x4 Gen2
> - HDMI OUT
> - 2x FMC connector (HPC and LPC)
>
> Link: https://www.aldec.com/en/products/emulation/tysom_boards/polarfire_microchip/tysom_m_mpfs250
> Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
> ---
> arch/riscv/boot/dts/microchip/Makefile | 1 +
> .../dts/microchip/mpfs-tysom-m-fabric.dtsi | 47 +++++
> .../riscv/boot/dts/microchip/mpfs-tysom-m.dts | 168 ++++++++++++++++++
> 3 files changed, 216 insertions(+)
> create mode 100644 arch/riscv/boot/dts/microchip/mpfs-tysom-m-fabric.dtsi
> create mode 100644 arch/riscv/boot/dts/microchip/mpfs-tysom-m.dts
>
> diff --git a/arch/riscv/boot/dts/microchip/Makefile b/arch/riscv/boot/dts/microchip/Makefile
> index 7427a20934f3..c54922a325fd 100644
> --- a/arch/riscv/boot/dts/microchip/Makefile
> +++ b/arch/riscv/boot/dts/microchip/Makefile
> @@ -3,4 +3,5 @@ dtb-$(CONFIG_SOC_MICROCHIP_POLARFIRE) += mpfs-icicle-kit.dtb
> dtb-$(CONFIG_SOC_MICROCHIP_POLARFIRE) += mpfs-m100pfsevp.dtb
> dtb-$(CONFIG_SOC_MICROCHIP_POLARFIRE) += mpfs-polarberry.dtb
> dtb-$(CONFIG_SOC_MICROCHIP_POLARFIRE) += mpfs-sev-kit.dtb
> +dtb-$(CONFIG_SOC_MICROCHIP_POLARFIRE) += mpfs-tysom-m.dtb
> obj-$(CONFIG_BUILTIN_DTB) += $(addsuffix .o, $(dtb-y))
> diff --git a/arch/riscv/boot/dts/microchip/mpfs-tysom-m-fabric.dtsi b/arch/riscv/boot/dts/microchip/mpfs-tysom-m-fabric.dtsi
> new file mode 100644
> index 000000000000..51d0c5176b9e
> --- /dev/null
> +++ b/arch/riscv/boot/dts/microchip/mpfs-tysom-m-fabric.dtsi
> @@ -0,0 +1,47 @@
> +// SPDX-License-Identifier: (GPL-2.0 OR MIT)
> +/* Copyright (c) 2022 Microchip Technology Inc */
> +
> +// #include "dt-bindings/mailbox/miv-ihc.h"
> +
> +/ {
> + fabric_clk3: fabric-clk3 {
> + compatible = "fixed-clock";
> + #clock-cells = <0>;
> + clock-frequency = <62500000>;
> + };
> +
> + fabric_clk1: fabric-clk1 {
> + compatible = "fixed-clock";
> + #clock-cells = <0>;
> + clock-frequency = <125000000>;
> + };
> +
> + pcie: pcie@2000000000 {
> + compatible = "microchip,pcie-host-1.0";
> + #address-cells = <0x3>;
> + #interrupt-cells = <0x1>;
> + #size-cells = <0x2>;
> + device_type = "pci";
> + reg = <0x20 0x0 0x0 0x8000000>, <0x0 0x43000000 0x0 0x10000>;
> + reg-names = "cfg", "apb";
> + bus-range = <0x0 0x7f>;
> + interrupt-parent = <&plic>;
> + interrupts = <119>;
> + interrupt-map = <0 0 0 1 &pcie_intc 0>,
> + <0 0 0 2 &pcie_intc 1>,
> + <0 0 0 3 &pcie_intc 2>,
> + <0 0 0 4 &pcie_intc 3>;
> + interrupt-map-mask = <0 0 0 7>;
> + clocks = <&fabric_clk1>, <&fabric_clk1>, <&fabric_clk3>;
> + clock-names = "fic0", "fic1", "fic3";
> + ranges = <0x3000000 0x0 0x8000000 0x20 0x8000000 0x0 0x80000000>;
> + msi-parent = <&pcie>;
> + msi-controller;
> + status = "disabled";
> + pcie_intc: interrupt-controller {
> + #address-cells = <0>;
> + #interrupt-cells = <1>;
> + interrupt-controller;
> + };
> + };
> +};
> diff --git a/arch/riscv/boot/dts/microchip/mpfs-tysom-m.dts b/arch/riscv/boot/dts/microchip/mpfs-tysom-m.dts
> new file mode 100644
> index 000000000000..5ad2fbd1b7ae
> --- /dev/null
> +++ b/arch/riscv/boot/dts/microchip/mpfs-tysom-m.dts
> @@ -0,0 +1,168 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Original all-in-one devicetree:
> + * Copyright (C) 2020-2022 - Aldec
> + * Rewritten to use includes:
> + * Copyright (C) 2022 - Conor Dooley <conor.dooley@microchip.com>
> + */
> +
> +/dts-v1/;
> +
> +#include "mpfs.dtsi"
> +#include "mpfs-tysom-m-fabric.dtsi"
> +
> +/* Clock frequency (in Hz) of the rtcclk */
> +#define MTIMER_FREQ 1000000
> +
> +/ {
> + model = "Aldec TySOM-M-MPFS250T";
> + compatible = "aldec,tysom-m-mpfs250t", "microchip,mpfs";
> +
> + aliases {
> + ethernet0 = &mac0;
> + ethernet1 = &mac1;
> + serial0 = &mmuart0;
> + serial1 = &mmuart1;
> + serial2 = &mmuart2;
> + serial3 = &mmuart3;
> + serial4 = &mmuart4;
> + gpio0 = &gpio0;
> + gpio1 = &gpio2;
> + };
> +
> + chosen {
> + stdout-path = "serial1:115200n8";
> + };
> +
> + cpus {
> + timebase-frequency = <MTIMER_FREQ>;
> + };
> +
> + ddrc_cache_lo: memory@80000000 {
> + device_type = "memory";
> + reg = <0x0 0x80000000 0x0 0x40000000>;
> + status = "okay";
> + };
> +
> + ddrc_cache_hi: memory@1000000000 {
> + device_type = "memory";
> + reg = <0x10 0x00000000 0x0 0x40000000>;
> + status = "okay";
> + };
> +
> + leds {
> + compatible = "gpio-leds";
> + status = "okay";
> +
> + led0 {

Typically this is led-0

> + gpios = <&gpio1 23 1>;

Does '1' stand for some GPIO flag?

> + default-state = "on";
> + linux,default-trigger = "heartbeat";
> + };
> + };
> +};
> +
> +&i2c0 {
> + status = "okay";
> +};
> +
> +&i2c1 {
> + status = "okay";
> + hwmon: hwmon@45 {
> + status = "okay";

No need for status.

> + compatible = "ti,ina219";
> + reg = <0x45>;
> + shunt-resistor = <2000>;
> + };
> +};
> +
> +&gpio1 {
> + interrupts = <27>, <28>, <29>, <30>,
> + <31>, <32>, <33>, <47>,
> + <35>, <36>, <37>, <38>,
> + <39>, <40>, <41>, <42>,
> + <43>, <44>, <45>, <46>,
> + <47>, <48>, <49>, <50>;
> + status = "okay";
> +};
> +
> +&mac0 {
> + status = "okay";
> + phy-mode = "gmii";
> + phy-handle = <&phy0>;
> +
> +};
> +
> +&mac1 {
> + status = "okay";
> + phy-mode = "gmii";
> + phy-handle = <&phy1>;
> + phy1: ethernet-phy@1 {
> + reg = <1>;
> + };
> + phy0: ethernet-phy@0 {
> + reg = <0>;
> + };
> +};
> +
> +&mbox {
> + status = "okay";
> +};
> +
> +&mmc {
> + max-frequency = <200000000>;
> + cap-mmc-highspeed;
> + cap-sd-highspeed;
> + no-1-8-v;
> + disable-wp;
> + status = "okay";
> +};
> +
> +&mmuart1 {
> + status = "okay";
> +};
> +
> +&mmuart2 {
> + status = "okay";
> +};
> +
> +&mmuart3 {
> + status = "okay";
> +};
> +
> +&mmuart4 {
> + status = "okay";
> +};
> +
> +&refclk {
> + clock-frequency = <125000000>;
> +};
> +
> +&rtc {
> + status = "okay";
> +};
> +
> +&spi0 {
> + status = "okay";
> +};
> +
> +&spi1 {
> + status = "okay";
> + flash@0 {
> + #address-cells = <1>;
> + #size-cells = <1>;

Are these needed? Does it pass dtbs_check?

> + compatible = "micron,n25q128a11", "jedec,spi-nor";
> + status = "okay";

No need for status.

Best regards,
Krzysztof

\
 
 \ /
  Last update: 2022-09-06 15:12    [W:0.116 / U:0.540 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site