lkml.org 
[lkml]   [2022]   [Sep]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH V3 2/2] LoongArch: Remove ARCH_HAS_PHYS_TO_DMA
From
Date
Hi, Huacai

Ok, thanks, I'll change title in V4. There is *not* size calculation in
this patch, so the patch does not need resource_size() as in
acpi_dma_get_range().

On 2022/9/5 下午10:42, Huacai Chen wrote:
> Hi, Jianmin,
>
> The title can be "LoongArch: Use acpi_arch_dma_setup() and remove
> ARCH_HAS_PHYS_TO_DMA", and please use resource_size() as arm64.
>
> Acked-by: Huacai Chen <chenhuacai@loongson.cn>
>
>
> Huacai
>
>
> On Tue, Aug 30, 2022 at 11:01 AM Jianmin Lv <lvjianmin@loongson.cn> wrote:
>>
>> Use _DMA defined in ACPI spec for translation between
>> DMA address and CPU address, and implement acpi_arch_dma_setup
>> for initializing dev->dma_range_map, where acpi_dma_get_range
>> is called for parsing _DMA.
>>
>> e.g.
>> If we have two dma ranges:
>> cpu address dma address size offset
>> 0x200080000000 0x2080000000 0x400000000 0x1fe000000000
>> 0x400080000000 0x4080000000 0x400000000 0x3fc000000000
>>
>> _DMA for pci devices should be declared in host bridge as
>> flowing:
>>
>> Name (_DMA, ResourceTemplate() {
>> QWordMemory (ResourceProducer,
>> PosDecode,
>> MinFixed,
>> MaxFixed,
>> NonCacheable,
>> ReadWrite,
>> 0x0,
>> 0x4080000000,
>> 0x447fffffff,
>> 0x3fc000000000,
>> 0x400000000,
>> ,
>> ,
>> )
>>
>> QWordMemory (ResourceProducer,
>> PosDecode,
>> MinFixed,
>> MaxFixed,
>> NonCacheable,
>> ReadWrite,
>> 0x0,
>> 0x2080000000,
>> 0x247fffffff,
>> 0x1fe000000000,
>> 0x400000000,
>> ,
>> ,
>> )
>> })
>>
>> Signed-off-by: Jianmin Lv <lvjianmin@loongson.cn>
>> ---
>> arch/loongarch/Kconfig | 1 -
>> arch/loongarch/kernel/dma.c | 52 +++++++++++++++++--------------------------
>> arch/loongarch/kernel/setup.c | 2 +-
>> include/linux/acpi.h | 9 +++++---
>> 4 files changed, 28 insertions(+), 36 deletions(-)
>>
>> diff --git a/arch/loongarch/Kconfig b/arch/loongarch/Kconfig
>> index b57daee..9dedcf9 100644
>> --- a/arch/loongarch/Kconfig
>> +++ b/arch/loongarch/Kconfig
>> @@ -7,7 +7,6 @@ config LOONGARCH
>> select ARCH_ENABLE_MEMORY_HOTPLUG
>> select ARCH_ENABLE_MEMORY_HOTREMOVE
>> select ARCH_HAS_ACPI_TABLE_UPGRADE if ACPI
>> - select ARCH_HAS_PHYS_TO_DMA
>> select ARCH_HAS_PTE_SPECIAL
>> select ARCH_HAS_TICK_BROADCAST if GENERIC_CLOCKEVENTS_BROADCAST
>> select ARCH_INLINE_READ_LOCK if !PREEMPTION
>> diff --git a/arch/loongarch/kernel/dma.c b/arch/loongarch/kernel/dma.c
>> index 8c9b531..7a9c6a9 100644
>> --- a/arch/loongarch/kernel/dma.c
>> +++ b/arch/loongarch/kernel/dma.c
>> @@ -2,39 +2,29 @@
>> /*
>> * Copyright (C) 2020-2022 Loongson Technology Corporation Limited
>> */
>> -#include <linux/init.h>
>> +#include <linux/acpi.h>
>> #include <linux/dma-direct.h>
>> -#include <linux/dma-mapping.h>
>> -#include <linux/dma-map-ops.h>
>> -#include <linux/swiotlb.h>
>>
>> -#include <asm/bootinfo.h>
>> -#include <asm/dma.h>
>> -#include <asm/loongson.h>
>> -
>> -/*
>> - * We extract 4bit node id (bit 44~47) from Loongson-3's
>> - * 48bit physical address space and embed it into 40bit.
>> - */
>> -
>> -static int node_id_offset;
>> -
>> -dma_addr_t phys_to_dma(struct device *dev, phys_addr_t paddr)
>> -{
>> - long nid = (paddr >> 44) & 0xf;
>> -
>> - return ((nid << 44) ^ paddr) | (nid << node_id_offset);
>> -}
>> -
>> -phys_addr_t dma_to_phys(struct device *dev, dma_addr_t daddr)
>> +void acpi_arch_dma_setup(struct device *dev)
>> {
>> - long nid = (daddr >> node_id_offset) & 0xf;
>> + int ret;
>> + u64 mask, end = 0;
>> + const struct bus_dma_region *map = NULL;
>> +
>> + ret = acpi_dma_get_range(dev, &map);
>> + if (!ret && map) {
>> + const struct bus_dma_region *r = map;
>> +
>> + for (end = 0; r->size; r++) {
>> + if (r->dma_start + r->size - 1 > end)
>> + end = r->dma_start + r->size - 1;
>> + }
>> +
>> + mask = DMA_BIT_MASK(ilog2(end) + 1);
>> + dev->bus_dma_limit = end;
>> + dev->dma_range_map = map;
>> + dev->coherent_dma_mask = min(dev->coherent_dma_mask, mask);
>> + *dev->dma_mask = min(*dev->dma_mask, mask);
>> + }
>>
>> - return ((nid << node_id_offset) ^ daddr) | (nid << 44);
>> -}
>> -
>> -void __init plat_swiotlb_setup(void)
>> -{
>> - swiotlb_init(true, SWIOTLB_VERBOSE);
>> - node_id_offset = ((readl(LS7A_DMA_CFG) & LS7A_DMA_NODE_MASK) >> LS7A_DMA_NODE_SHF) + 36;
>> }
>> diff --git a/arch/loongarch/kernel/setup.c b/arch/loongarch/kernel/setup.c
>> index c74860b..974f085 100644
>> --- a/arch/loongarch/kernel/setup.c
>> +++ b/arch/loongarch/kernel/setup.c
>> @@ -247,7 +247,7 @@ static void __init arch_mem_init(char **cmdline_p)
>> sparse_init();
>> memblock_set_bottom_up(true);
>>
>> - plat_swiotlb_setup();
>> + swiotlb_init(true, SWIOTLB_VERBOSE);
>>
>> dma_contiguous_reserve(PFN_PHYS(max_low_pfn));
>>
>> diff --git a/include/linux/acpi.h b/include/linux/acpi.h
>> index 34e0545..33977b87 100644
>> --- a/include/linux/acpi.h
>> +++ b/include/linux/acpi.h
>> @@ -278,14 +278,17 @@ int acpi_table_parse_madt(enum acpi_madt_type id,
>>
>> void acpi_numa_x2apic_affinity_init(struct acpi_srat_x2apic_cpu_affinity *pa);
>>
>> +#if defined(CONFIG_ARM64) || defined(CONFIG_LOONGARCH)
>> +void acpi_arch_dma_setup(struct device *dev);
>> +#else
>> +static inline void acpi_arch_dma_setup(struct device *dev) { }
>> +#endif
>> +
>> #ifdef CONFIG_ARM64
>> void acpi_numa_gicc_affinity_init(struct acpi_srat_gicc_affinity *pa);
>> -void acpi_arch_dma_setup(struct device *dev);
>> #else
>> static inline void
>> acpi_numa_gicc_affinity_init(struct acpi_srat_gicc_affinity *pa) { }
>> -static inline void
>> -acpi_arch_dma_setup(struct device *dev) { }
>> #endif
>>
>> int acpi_numa_memory_affinity_init (struct acpi_srat_mem_affinity *ma);
>> --
>> 1.8.3.1
>>
>>

\
 
 \ /
  Last update: 2022-09-06 14:36    [W:0.077 / U:1.400 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site