lkml.org 
[lkml]   [2022]   [Sep]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v4 05/21] hwmon: (mr75203) fix voltage equation for negative source input
On Tue, Sep 06, 2022 at 08:33:40AM +0000, Eliav Farber wrote:
> According to Moortec Embedded Voltage Monitor (MEVM) series 3 data
> sheet, the minimum input signal is -100mv and maximum input signal
> is +1000mv.
>
> The equation used to convert the digital word to voltage uses mixed
> types (*val signed and n unsigned), and on 64 bit machines also has
> different size, since sizeof(u32) = 4 and sizeof(long) = 8.
>
> So when measuring a negative input, n will be small enough, such that
> PVT_N_CONST * n < PVT_R_CONST, and the result of
> (PVT_N_CONST * n - PVT_R_CONST) will overflow to a very big positive
> 32 bit number. Then when storing the result in *val it will be the same
> value just in 64 bit (instead of it representing a negative number which
> will what happen when sizeof(long) = 4).
>
> When -1023 <= (PVT_N_CONST * n - PVT_R_CONST) <= -1
> dividing the number by 1024 should result of in 0, but because ">> 10"
> is used it results in -1 (0xf...fffff).
>
> This change fixes the sign problem and supports negative values by
> casting n to long and replacing the shift right with div operation.

This is really downside of C...

...

> - *val = (PVT_N_CONST * n - PVT_R_CONST) >> PVT_CONV_BITS;
> + *val = (PVT_N_CONST * (long)n - PVT_R_CONST) / (1 << PVT_CONV_BITS);

Wondering if we can use BIT(PVT_CONV_BITS) for two (quite unlikely to happen,
I hope) purposes:

1) Somebody copies such code where PVT_CONV_BITS analogue can be 31,
which is according to C standard is UB (undefined behaviour).

2) It makes shorter the line and also drops the pattern where some
dumb robot may propose a patch to basically revert the division
change.

--
With Best Regards,
Andy Shevchenko


\
 
 \ /
  Last update: 2022-09-06 14:05    [W:0.620 / U:3.508 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site