lkml.org 
[lkml]   [2022]   [Sep]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v4 04/21] hwmon: (mr75203) update pvt->v_num and vm_num to the actual number of used sensors
Date
This issue is relevant when "intel,vm-map" is set in device-tree, and
defines a lower number of VMs than actually supported.

This change is needed for all places that use pvt->v_num or vm_num
later on in the code.

Fixes: 9d823351a337 ("hwmon: Add hardware monitoring driver for Moortec MR75203 PVT controller")
Signed-off-by: Eliav Farber <farbere@amazon.com>
---
V4 -> v3:
- Update also vm_num to actual number of VMs.

drivers/hwmon/mr75203.c | 2 ++
1 file changed, 2 insertions(+)

diff --git a/drivers/hwmon/mr75203.c b/drivers/hwmon/mr75203.c
index 0ead576694a1..a209f5d95f4b 100644
--- a/drivers/hwmon/mr75203.c
+++ b/drivers/hwmon/mr75203.c
@@ -605,6 +605,8 @@ static int mr75203_probe(struct platform_device *pdev)
if (pvt->vm_idx[i] >= vm_num ||
pvt->vm_idx[i] == 0xff) {
num = i;
+ pvt->v_num = i;
+ vm_num = i;
break;
}
}
--
2.37.1
\
 
 \ /
  Last update: 2022-09-06 10:37    [W:0.435 / U:0.036 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site