lkml.org 
[lkml]   [2022]   [Sep]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v4 19/21] dt-bindings: hwmon: (mr75203) add coefficient properties for the thermal equation
Date
Add optional temperature coefficient properties:
*) moortec,ts-coeff-g
*) moortec,ts-coeff-h
*) moortec,ts-coeff-cal5
*) moortec,ts-coeff-j
If defined they shall be used instead of defaults.

The coefficients were added to device tree on top of the series property
(which can be used to select between series 5 and series 6), because
coefficients can vary between product and product, and code defaults might
not be accurate enough.

Signed-off-by: Eliav Farber <farbere@amazon.com>
---
V4 -> V3:
- Add 'multipleOf: 1000' instead of plain text.
- Add minimum/maximum for some of the new properties.

V3 -> V2:
- Add "moortec" prefix to property name.

.../bindings/hwmon/moortec,mr75203.yaml | 37 +++++++++++++++++++
1 file changed, 37 insertions(+)

diff --git a/Documentation/devicetree/bindings/hwmon/moortec,mr75203.yaml b/Documentation/devicetree/bindings/hwmon/moortec,mr75203.yaml
index 28656e9d9059..5e3d060290a9 100644
--- a/Documentation/devicetree/bindings/hwmon/moortec,mr75203.yaml
+++ b/Documentation/devicetree/bindings/hwmon/moortec,mr75203.yaml
@@ -100,6 +100,41 @@ properties:
default: 5
$ref: /schemas/types.yaml#/definitions/uint32

+ moortec,ts-coeff-g:
+ description:
+ G coefficient for temperature equation.
+ Default for series 5 = 60000
+ Default for series 6 = 57400
+ multipleOf: 1000
+ minimum: 1000
+ $ref: /schemas/types.yaml#/definitions/uint32
+
+ moortec,ts-coeff-h:
+ description:
+ H coefficient for temperature equation.
+ Default for series 5 = 200000
+ Default for series 6 = 249400
+ multipleOf: 1000
+ minimum: 1000
+ $ref: /schemas/types.yaml#/definitions/uint32
+
+ moortec,ts-coeff-cal5:
+ description:
+ cal5 coefficient for temperature equation.
+ Default for series 5 = 4094
+ Default for series 6 = 4096
+ minimum: 1
+ $ref: /schemas/types.yaml#/definitions/uint32
+
+ moortec,ts-coeff-j:
+ description:
+ J coefficient for temperature equation.
+ Default for series 5 = -100
+ Default for series 6 = 0
+ multipleOf: 1000
+ maximum: 0
+ $ref: /schemas/types.yaml#/definitions/int32
+
required:
- compatible
- reg
@@ -123,5 +158,7 @@ examples:
resets = <&rcu0 0x40 7>;
moortec,vm-active-channels = /bits/ 8 <0x10 0x05>;
moortec,vm-pre-scaler-x2 = /bits/ 8 <5 6 20>;
+ moortec,ts-coeff-g = <61400>;
+ moortec,ts-coeff-h = <253700>;
#thermal-sensor-cells = <1>;
};
--
2.37.1
\
 
 \ /
  Last update: 2022-09-06 10:37    [W:0.283 / U:0.600 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site