lkml.org 
[lkml]   [2022]   [Sep]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRE: [PATCH v3 4/5] drm/panfrost: devfreq: set opp to the recommended one to configure and enable regulator
Date
Hi Clement,

> Subject: Re: [PATCH v3 4/5] drm/panfrost: devfreq: set opp to the
> recommended one to configure and enable regulator
>
> Hi Biju,
>
> On Tue, 6 Sept 2022 at 08:42, Biju Das <biju.das.jz@bp.renesas.com>
> wrote:
> >
> > Hi Clement,
> >
> > >
> > > Hi,
> > >
> > > On Mon, 5 Sept 2022 at 20:17, Biju Das <biju.das.jz@bp.renesas.com>
> > > wrote:
> > > >
> > > > Hi,
> > > >
> > > > Thanks for the patch.
> > > >
> > > > > Subject: [PATCH v3 4/5] drm/panfrost: devfreq: set opp to the
> > > > > recommended one to configure and enable regulator
> > > > >
> > > > > devm_pm_opp_set_regulators() doesn't enable regulator, which
> > > > > make regulator framework switching it off during
> regulator_late_cleanup().
> > > >
> > > > In that case, why not regulator_get()for Dynamic regulator(non
> > > > fixed regulator)??
> > >
> > > Sorry I don't understand, what do you mean?
> >
> > Normally we need to turn on regulator and clock only when needed.
> > I am not sure with your new code, will make it always on and drains
> > the power unnecessarily and does it set lower opp or higher opp at the
> > start??
>
> The code doesn't make it always on, it makes it how it should be at the
> recommended OPP which is the "start point".
>
> If the recommended OPP says to switch off the regulator then it will.
>
> >
> > Compared to the fixed regulator, you have voltage regulator to control
> > that is the difference between my environment and Your environment.
> >
> > I am not sure any other SoC is using voltage regulator??
> > If yes, thenthere should be some bug or some difference in HW which is
> > giving different behaviour??
> >
> > If you are the first one using voltage regulator with mali gpu, Then
> > Your implementation may be correct, as you have proper HW to check.
>
> The issue is that my regulator is not marked as "always-on", if no OPP is
> called before regulator_late_cleanup() then nobody sets the
> regulator_enable() and the regulator is switched off, which makes my
> board hang.

Cool, From your testing looks like no one tested this feature with
mali GPU on mainline??

Cheers,
Biju


>
> Like Viresh recommends I will send an update with more details in the
> commit log.
>
> Regards,
> Clement
>
>
> >
> > >
> > > >
> > > > >
> > > > > Call dev_pm_opp_set_opp() with the recommend OPP in
> > > > > panfrost_devfreq_init() to enable the regulator and avoid any
> > > > > switch off by regulator_late_cleanup().
> > > > >
> > > > > Suggested-by: Viresh Kumar <viresh.kumar@linaro.org>
> > > > > Signed-off-by: Clément Péron <peron.clem@gmail.com>
> > > > > ---
> > > > > drivers/gpu/drm/panfrost/panfrost_devfreq.c | 8 ++++++++
> > > > > 1 file changed, 8 insertions(+)
> > > > >
> > > > > diff --git a/drivers/gpu/drm/panfrost/panfrost_devfreq.c
> > > > > b/drivers/gpu/drm/panfrost/panfrost_devfreq.c
> > > > > index 5110cd9b2425..67b242407156 100644
> > > > > --- a/drivers/gpu/drm/panfrost/panfrost_devfreq.c
> > > > > +++ b/drivers/gpu/drm/panfrost/panfrost_devfreq.c
> > > > > @@ -131,6 +131,14 @@ int panfrost_devfreq_init(struct
> > > > > panfrost_device
> > > > > *pfdev)
> > > > > return PTR_ERR(opp);
> > > > >
> > > > > panfrost_devfreq_profile.initial_freq = cur_freq;
> > > > > +
> > > > > + /* Setup and enable regulator */
> > > > > + ret = dev_pm_opp_set_opp(dev, opp);
> > > > > + if (ret) {
> > > > > + DRM_DEV_ERROR(dev, "Couldn't set recommended
> OPP\n");
> > > > > + return ret;
> > > > > + }
> > > >
> > > >
> > > > FYI,
> > > > On RZ/G2L mali gpu, we have fixed regulator and I was able to do
> > > > GPU OPP transition without any issues previously.
> > >
> > > rzg2l-smarc-som.dtsi uses regulator reg_1p1v; which is marked as
> > > regulator-always-on; that's why
> > > regulator_late_cleanup() doesn't switch it off.
> >
> > Yes that is correct. It is fixed regulator and always on.
> > We control only frequency.
> >
> > Cheers,
> > Biju
> >
> > >
> > > >
> > > > root@smarc-rzg2l:~# cat /sys/class/devfreq/11840000.gpu/trans_stat
> > > > From : To
> > > > : 50000000 62500000 100000000 125000000 200000000
> > > 250000000 400000000 500000000 time(ms)
> > > > * 50000000: 0 0 0 0 0
> > > 0 0 1 144
> > > > 62500000: 0 0 0 0 0
> > > 0 0 0 0
> > > > 100000000: 0 0 0 0 0
> > > 0 0 9 524
> > > > 125000000: 0 0 9 0 0
> > > 0 0 3 2544
> > > > 200000000: 0 0 0 11 0
> > > 0 0 46 3304
> > > > 250000000: 1 0 0 0 33
> > > 0 0 0 7496
> > > > 400000000: 0 0 0 0 16
> > > 19 0 0 2024
> > > > 500000000: 1 0 0 1 8
> > > 15 35 0 4032
> > > > Total transition : 208
> > > >
> > > > Cheers,
> > > > Biju
> > > >
\
 
 \ /
  Last update: 2022-09-06 10:07    [W:0.063 / U:1.164 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site