lkml.org 
[lkml]   [2022]   [Sep]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v1 1/5] Documentation: fpga: dfl: Add documentation for DFHv1
Date
From: Matthew Gerlach <matthew.gerlach@linux.intel.com>

Add documentation describing the extentions provided by Version
1 of the Device Feature Header (DFHv1).

Signed-off-by: Matthew Gerlach <matthew.gerlach@linux.intel.com>
---
Documentation/fpga/dfl.rst | 24 ++++++++++++++++++++++++
1 file changed, 24 insertions(+)

diff --git a/Documentation/fpga/dfl.rst b/Documentation/fpga/dfl.rst
index 15b670926084..31699b89781e 100644
--- a/Documentation/fpga/dfl.rst
+++ b/Documentation/fpga/dfl.rst
@@ -561,6 +561,30 @@ new DFL feature via UIO direct access, its feature id should be added to the
driver's id_table.


+Extending the Device Feature Header - DFHv1
+===========================================
+The current 8 bytes of the Device Feature Header, hereafter referred to as
+to DFHv0, provide very little opportunity for the hardware to describe itself
+to software. Version 1 of the Device Feature Header (DFHv1) is being introduced
+to provide increased flexibility and extensibility to hardware designs using
+Device Feature Lists. The list below describes some of the goals behind the
+changes in DFHv1:
+
+* Provide a standardized mechanism for features to describe
+ parameters/capabilities to software.
+* Standardize the use of a GUID for all DFHv1 types.
+* Decouple the location of the DFH from the register space of the feature itself.
+
+Modeled after PCI Capabilities, DFHv1 Parameters provide a mechanism to associate
+a list of parameter values to a particular feature.
+
+With DFHv0, not all features types contained a GUID. DFHv1 makes the GUILD standard
+across all types.
+
+With DFHv0, the register map of a given feature is located immediately following
+the DFHv0 in the memory space. With DFHv1, the location of the feature register
+map can be specified as an offset to the DFHv1 or as an absolute address.
+
Open discussion
===============
FME driver exports one ioctl (DFL_FPGA_FME_PORT_PR) for partial reconfiguration
--
2.25.1
\
 
 \ /
  Last update: 2022-09-06 21:05    [W:0.329 / U:0.596 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site