lkml.org 
[lkml]   [2022]   [Sep]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 3/8] dt-bindings: Add bindings for Tegra234 NVDEC
Date
From: Mikko Perttunen <mperttunen@nvidia.com>

Update NVDEC bindings for Tegra234. This new engine version only has
two memory clients, but now requires three clocks, and as a bigger
change the engine loads firmware from a secure carveout configured by
the bootloader.

For the latter, we need to add a phandle to the memory controller
to query the location of this carveout, and several other properties
containing offsets into the firmware inside the carveout. These
properties are intended to be populated through a device tree overlay
configured at flashing time, so that the values correspond to the
flashed NVDEC firmware.

Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
---
.../gpu/host1x/nvidia,tegra210-nvdec.yaml | 118 +++++++++++++++---
1 file changed, 98 insertions(+), 20 deletions(-)

diff --git a/Documentation/devicetree/bindings/gpu/host1x/nvidia,tegra210-nvdec.yaml b/Documentation/devicetree/bindings/gpu/host1x/nvidia,tegra210-nvdec.yaml
index 3cf862976448..27128a195b66 100644
--- a/Documentation/devicetree/bindings/gpu/host1x/nvidia,tegra210-nvdec.yaml
+++ b/Documentation/devicetree/bindings/gpu/host1x/nvidia,tegra210-nvdec.yaml
@@ -24,17 +24,11 @@ properties:
- nvidia,tegra210-nvdec
- nvidia,tegra186-nvdec
- nvidia,tegra194-nvdec
+ - nvidia,tegra234-nvdec

reg:
maxItems: 1

- clocks:
- maxItems: 1
-
- clock-names:
- items:
- - const: nvdec
-
resets:
maxItems: 1

@@ -50,18 +44,6 @@ properties:

dma-coherent: true

- interconnects:
- items:
- - description: DMA read memory client
- - description: DMA read 2 memory client
- - description: DMA write memory client
-
- interconnect-names:
- items:
- - const: dma-mem
- - const: read-1
- - const: write
-
nvidia,host1x-class:
description: |
Host1x class of the engine, used to specify the targeted engine
@@ -79,7 +61,103 @@ required:
- reset-names
- power-domains

-additionalProperties: false
+unevaluatedProperties: false
+
+allOf:
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - nvidia,tegra234-nvdec
+ then:
+ properties:
+ clocks:
+ items:
+ - description: NVDEC clock
+ - description: FUSE clock
+ - description: TSEC_PKA clock
+ clock-names:
+ items:
+ - const: nvdec
+ - const: fuse
+ - const: tsec_pka
+ interconnects:
+ items:
+ - description: DMA read memory client
+ - description: DMA write memory client
+ interconnect-names:
+ items:
+ - const: dma-mem
+ - const: write
+ nvidia,memory-controller:
+ $ref: /schemas/types.yaml#/definitions/phandle
+ description:
+ phandle to the memory controller for determining carveout information.
+ nvidia,bl-manifest-offset:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description:
+ Offset to bootloader manifest from beginning of firmware. Typically set as
+ part of a device tree overlay corresponding to flashed firmware.
+ nvidia,bl-code-offset:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description:
+ Offset to bootloader code section from beginning of firmware. Typically set as
+ part of a device tree overlay corresponding to flashed firmware.
+ nvidia,bl-data-offset:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description:
+ Offset to bootloader data section from beginning of firmware. Typically set as
+ part of a device tree overlay corresponding to flashed firmware.
+ nvidia,os-manifest-offset:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description:
+ Offset to operating system manifest from beginning of firmware. Typically set as
+ part of a device tree overlay corresponding to flashed firmware.
+ nvidia,os-code-offset:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description:
+ Offset to operating system code section from beginning of firmware. Typically set as
+ part of a device tree overlay corresponding to flashed firmware.
+ nvidia,os-data-offset:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description:
+ Offset to operating system data section from beginning of firmware. Typically set as
+ part of a device tree overlay corresponding to flashed firmware.
+ required:
+ - nvidia,memory-controller
+ - nvidia,bl-manifest-offset
+ - nvidia,bl-code-offset
+ - nvidia,bl-data-offset
+ - nvidia,os-manifest-offset
+ - nvidia,os-code-offset
+ - nvidia,os-data-offset
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - nvidia,tegra210-nvdec
+ - nvidia,tegra186-nvdec
+ - nvidia,tegra194-nvdec
+ then:
+ properties:
+ clocks:
+ items:
+ - description: NVDEC clock
+ clock-names:
+ items:
+ - const: nvdec
+ interconnects:
+ items:
+ - description: DMA read memory client
+ - description: DMA read 2 memory client
+ - description: DMA write memory client
+ interconnect-names:
+ items:
+ - const: dma-mem
+ - const: read-1
+ - const: write

examples:
- |
--
2.37.0
\
 
 \ /
  Last update: 2022-09-06 16:27    [W:0.211 / U:0.492 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site