lkml.org 
[lkml]   [2022]   [Sep]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH v5 6/6] remoteproc: pru: add support for configuring GPMUX based on client setup
From
Hi Mathieu,

On 19/07/22 21:46, Mathieu Poirier wrote:
> On Tue, Jun 07, 2022 at 10:26:50AM +0530, Puranjay Mohan wrote:
>> From: Tero Kristo <t-kristo@ti.com>
>>
>> Client device node property ti,pruss-gp-mux-sel can now be used to
>> configure the GPMUX config value for PRU.
>>
>> Signed-off-by: Tero Kristo <t-kristo@ti.com>
>> [s-anna@ti.com: simplify the pru id usage]
>> Signed-off-by: Suman Anna <s-anna@ti.com>
>> Signed-off-by: Puranjay Mohan <p-mohan@ti.com>
>> ---
>> V4->v5
>> * This patch was included in v4 and had some checkpatch errors that have
>> been resolved in v5
>> ---
>> drivers/remoteproc/pru_rproc.c | 20 ++++++++++++++++++++
>> 1 file changed, 20 insertions(+)
>>
>> diff --git a/drivers/remoteproc/pru_rproc.c b/drivers/remoteproc/pru_rproc.c
>> index 2977eb50631b..f2c6c55f0f20 100644
>> --- a/drivers/remoteproc/pru_rproc.c
>> +++ b/drivers/remoteproc/pru_rproc.c
>> @@ -123,6 +123,7 @@ struct pru_private_data {
>> * @dbg_single_step: debug state variable to set PRU into single step mode
>> * @dbg_continuous: debug state variable to restore PRU execution mode
>> * @evt_count: number of mapped events
>> + * @gpmux_save: saved value for gpmux config
>> */
>> struct pru_rproc {
>> int id;
>> @@ -141,6 +142,7 @@ struct pru_rproc {
>> u32 dbg_single_step;
>> u32 dbg_continuous;
>> u8 evt_count;
>> + u8 gpmux_save;
>> };
>>
>> static inline u32 pru_control_read_reg(struct pru_rproc *pru, unsigned int reg)
>> @@ -250,6 +252,7 @@ struct rproc *pru_rproc_get(struct device_node *np, int index,
>> struct device *dev;
>> const char *fw_name;
>> int ret;
>> + u32 mux;
>>
>> try_module_get(THIS_MODULE);
>>
>> @@ -273,6 +276,22 @@ struct rproc *pru_rproc_get(struct device_node *np, int index,
>>
>> mutex_unlock(&pru->lock);
>>
>> + ret = pruss_cfg_get_gpmux(pru->pruss, pru->id, &pru->gpmux_save);
>> + if (ret) {
>> + dev_err(dev, "failed to get cfg gpmux: %d\n", ret);
>> + goto err;
>> + }
>> +
>> + ret = of_property_read_u32_index(np, "ti,pruss-gp-mux-sel", index,
>> + &mux);
>> + if (!ret) {
>> + ret = pruss_cfg_set_gpmux(pru->pruss, pru->id, mux);
>> + if (ret) {
>> + dev_err(dev, "failed to set cfg gpmux: %d\n", ret);
>> + goto err;
>> + }
>> + }
>> +
>> if (pru_id)
>> *pru_id = pru->id;
>>
>> @@ -310,6 +329,7 @@ void pru_rproc_put(struct rproc *rproc)
>>
>> pru = rproc->priv;
>>
>> + pruss_cfg_set_gpmux(pru->pruss, pru->id, pru->gpmux_save);
>> pru_rproc_set_firmware(rproc, NULL);
>>
>
> CC drivers/remoteproc/pru_rproc.o
> /home/mpoirier/work/remoteproc/kernel-review/drivers/remoteproc/pru_rproc.c: In function ‘pru_rproc_get’:
> /home/mpoirier/work/remoteproc/kernel-review/drivers/remoteproc/pru_rproc.c:279:8: error: implicit declaration of function ‘pruss_cfg_get_gpmux’ [-Werror=implicit-function-declaration]
> 279 | ret = pruss_cfg_get_gpmux(pru->pruss, pru->id, &pru->gpmux_save);
> | ^~~~~~~~~~~~~~~~~~~
> /home/mpoirier/work/remoteproc/kernel-review/drivers/remoteproc/pru_rproc.c:288:9: error: implicit declaration of function ‘pruss_cfg_set_gpmux’ [-Werror=implicit-function-declaration]
> 288 | ret = pruss_cfg_set_gpmux(pru->pruss, pru->id, mux);
> | ^~~~~~~~~~~~~~~~~~~
>
> I get this on both rproc-next and today's linux next.

This patch is dependent on the series [2] Introduce PRU platform consumer API
https://patchwork.kernel.org/project/linux-remoteproc/cover/20220406094358.7895-1-p-mohan@ti.com/
as the api pruss_cfg_get_gpmux calls the api pruss_cfg_read and the api
pruss_cfg_set_gpmux calls the api pruss_cfg_update which are implemented by the
patch "soc: ti: pruss: Add pruss_cfg_read()/update() API" in the above series.

This error is coming as the dependent patch needs the patch "soc: ti: pruss:
Add pruss_cfg_read()/update() API" to be applied for compilation.

Thanks,
Danish.

>
>> mutex_lock(&pru->lock);
>> --
>> 2.17.1
>>

\
 
 \ /
  Last update: 2022-09-05 11:14    [W:0.089 / U:0.188 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site