lkml.org 
[lkml]   [2022]   [Sep]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRE: [PATCH v8 0/3] Add support for lan966x flexcom chip-select configuration
Date
Hi Lee,

Are you planning to take this patch series for 6.1 or Can we include them through arm-soc pull-request?

Thanks,
Kavya

> -----Original Message-----
> From: Kavyasree Kotagiri [mailto:kavyasree.kotagiri@microchip.com]
> Sent: Friday, July 8, 2022 5:26 PM
> To: robh+dt@kernel.org; krzysztof.kozlowski+dt@linaro.org; Nicolas Ferre -
> M43238 <Nicolas.Ferre@microchip.com>; alexandre.belloni@bootlin.com;
> Claudiu Beznea - M18063 <Claudiu.Beznea@microchip.com>;
> UNGLinuxDriver <UNGLinuxDriver@microchip.com>
> Cc: devicetree@vger.kernel.org; linux-arm-kernel@lists.infradead.org; linux-
> kernel@vger.kernel.org; Kavyasree Kotagiri - I30978
> <Kavyasree.Kotagiri@microchip.com>
> Subject: [PATCH v8 0/3] Add support for lan966x flexcom chip-select
> configuration
>
> This patch series converts atmel-flexcom bindings into json-schema format.
> Adds support for lan966x flexcom chip-select configurations and its
> DT bindings.
>
> v7 -> v8:
> - Added back patternProperties for child nodes.
> - Changed compatible string to microchip,lan9668-flexcom.
>
> v6 -> v7:
> - Change filename to atmel,sama5d2-flexcom.yaml
> - Add #address-cells, #size-cells to flexcom node - Fixed warnings.
>
> v5 -> v6:
> - Removed spi node from example as suggested by Rob and
> also pattern properties(spi dt-bindings conversion to yaml patch is under
> review).
> https://patchwork.kernel.org/project/linux-arm-
> kernel/patch/20220629125804.137099-1-sergiu.moga@microchip.com/
> Once this is accepted, I will add back spi example through new patch.
>
> v4 -> v5:
> - Fix indentations of DT example.
> - Fix dt-schema errors - removed minItems, maxItems for allOf:if:then
> "reg" property as it is not required.
>
> v3 -> v4:
> - Fix dtschema errors.
> - Add a condition to flexcom chip-selects configuration as chip-select
> lines are optional.
>
> v2 -> v3:
> - changed IRQ flag in dt-bindings example.
> - added reg property specific to lan66x which is missed in v2.
> - used goto label for clk_disable in error cases.
>
> v1 -> v2:
> - minor fix in title of dt-bindings.
> - Modified new dt properties usage in atmel,flexcom.yaml.
> - Used GENMASK and macros for maximum allowed values.
> - Use u32 values for flexcom chipselects instead of strings.
> - disable clock in case of errors.
>
> Kavyasree Kotagiri (3):
> dt-bindings: mfd: Convert atmel-flexcom to json-schema
> dt-bindings: mfd: atmel,sama5d2-flexcom: Add new compatible string for
> lan966x
> mfd: atmel-flexcom: Add support for lan966x flexcom chip-select
> configuration
>
> .../bindings/mfd/atmel,sama5d2-flexcom.yaml | 155 ++++++++++++++++++
> .../devicetree/bindings/mfd/atmel-flexcom.txt | 63 -------
> drivers/mfd/atmel-flexcom.c | 94 ++++++++++-
> 3 files changed, 248 insertions(+), 64 deletions(-)
> create mode 100644
> Documentation/devicetree/bindings/mfd/atmel,sama5d2-flexcom.yaml
> delete mode 100644 Documentation/devicetree/bindings/mfd/atmel-
> flexcom.txt
>
> --
> 2.25.1

\
 
 \ /
  Last update: 2022-09-05 09:55    [W:0.121 / U:0.736 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site