lkml.org 
[lkml]   [2022]   [Sep]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 7/9] arm64: dts: ls1046a: add gpios based i2c recovery information
On Wed, Aug 24, 2022 at 06:11:58PM -0500, Li Yang wrote:
> Add scl-gpios property for i2c recovery and add SoC specific compatible
> string for SoC specific fixup.
>
> Signed-off-by: Zhang Ying <ying.zhang22455@nxp.com>
> Signed-off-by: Li Yang <leoyang.li@nxp.com>
> ---
> arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi | 11 +++++++----
> 1 file changed, 7 insertions(+), 4 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
> index c7c6c82626fd..c95a990e2edd 100644
> --- a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
> +++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
> @@ -502,7 +502,7 @@ dspi: spi@2100000 {
> };
>
> i2c0: i2c@2180000 {
> - compatible = "fsl,vf610-i2c";
> + compatible = "fsl,ls1046a-i2c", "fsl,vf610-i2c";
> #address-cells = <1>;
> #size-cells = <0>;
> reg = <0x0 0x2180000 0x0 0x10000>;
> @@ -516,35 +516,38 @@ i2c0: i2c@2180000 {
> };
>
> i2c1: i2c@2190000 {
> - compatible = "fsl,vf610-i2c";
> + compatible = "fsl,ls1046a-i2c", "fsl,vf610-i2c";
> #address-cells = <1>;
> #size-cells = <0>;
> reg = <0x0 0x2190000 0x0 0x10000>;
> interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
> clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
> QORIQ_CLK_PLL_DIV(2)>;
> + scl-gpios = <&gpio3 2 0>;

Use define for polarity cell?

Shawn

> status = "disabled";
> };
>
> i2c2: i2c@21a0000 {
> - compatible = "fsl,vf610-i2c";
> + compatible = "fsl,ls1046a-i2c", "fsl,vf610-i2c";
> #address-cells = <1>;
> #size-cells = <0>;
> reg = <0x0 0x21a0000 0x0 0x10000>;
> interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
> clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
> QORIQ_CLK_PLL_DIV(2)>;
> + scl-gpios = <&gpio3 10 0>;
> status = "disabled";
> };
>
> i2c3: i2c@21b0000 {
> - compatible = "fsl,vf610-i2c";
> + compatible = "fsl,ls1046a-i2c", "fsl,vf610-i2c";
> #address-cells = <1>;
> #size-cells = <0>;
> reg = <0x0 0x21b0000 0x0 0x10000>;
> interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
> clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
> QORIQ_CLK_PLL_DIV(2)>;
> + scl-gpios = <&gpio3 12 0>;
> status = "disabled";
> };
>
> --
> 2.37.1
>

\
 
 \ /
  Last update: 2022-09-05 03:14    [W:0.069 / U:1.224 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site