lkml.org 
[lkml]   [2022]   [Sep]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 2/3] arm64: dts: qcom: sdm845-db845c: correct SPI2 pins drive strength
Date
The pin configuration (done with generic pin controller helpers and
as expressed by bindings) requires children nodes with either:
1. "pins" property and the actual configuration,
2. another set of nodes with above point.

The qup_spi2_default pin configuration used second method - with a
"pinmux" child.

Fixes: 8d23a0040475 ("arm64: dts: qcom: db845c: add Low speed expansion i2c and spi nodes")
Cc: <stable@vger.kernel.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

---

Not tested on hardware.
---
arch/arm64/boot/dts/qcom/sdm845-db845c.dts | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
index 132417e2d11e..a157eab66dee 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
+++ b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
@@ -1123,7 +1123,9 @@ &wifi {

/* PINCTRL - additions to nodes defined in sdm845.dtsi */
&qup_spi2_default {
- drive-strength = <16>;
+ pinmux {
+ drive-strength = <16>;
+ };
};

&qup_uart3_default{
--
2.34.1
\
 
 \ /
  Last update: 2022-09-30 20:23    [W:0.074 / U:0.032 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site