lkml.org 
[lkml]   [2022]   [Sep]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH 12/20] gpio/rockchip: add return check for clock rate set
On Tue, Sep 20, 2022 at 12:31 PM Jianqun Xu <jay.xu@rock-chips.com> wrote:
>
> Check if the clock rate set for the apb clock is successful or not.
>
> Signed-off-by: Jianqun Xu <jay.xu@rock-chips.com>
> ---
> drivers/gpio/gpio-rockchip.c | 3 +++
> 1 file changed, 3 insertions(+)
>
> diff --git a/drivers/gpio/gpio-rockchip.c b/drivers/gpio/gpio-rockchip.c
> index e36cdbd4bbef..511e93a6a429 100644
> --- a/drivers/gpio/gpio-rockchip.c
> +++ b/drivers/gpio/gpio-rockchip.c
> @@ -199,6 +199,9 @@ static int rockchip_gpio_set_debounce(struct gpio_chip *gc,
> if (bank->gpio_type == GPIO_TYPE_V2 && !IS_ERR(bank->db_clk)) {
> div_debounce_support = true;
> freq = clk_get_rate(bank->db_clk);
> + if (!freq)
> + return -EINVAL;
> +
> max_debounce = (GENMASK(23, 0) + 1) * 2 * 1000000 / freq;
> if (debounce > max_debounce)
> return -EINVAL;
> --
> 2.25.1
>

This cannot happen, clk_get_rate() can only return 0 for clk == NULL.
We're not using an optional clock.

Bart

\
 
 \ /
  Last update: 2022-09-30 11:20    [W:0.113 / U:3.360 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site