lkml.org 
[lkml]   [2022]   [Sep]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH v2 2/2] arm64: dts: ti: add k3-j721e-beagleboneai64
From
Hi,

On 23/08/22 4:33 am, Robert Nelson wrote:
> + main_i2c2_pins_default: main_i2c2_pins_default {
> + pinctrl-single,pins = <
> + J721E_IOPAD(0x208, PIN_INPUT_PULLUP, 4) /* (W5) MCAN0_RX.I2C2_SCL */
> + J721E_IOPAD(0x20c, PIN_INPUT_PULLUP, 4) /* (W6) MCAN0_TX.I2C2_SDA */
> + J721E_IOPAD(0x138, PIN_INPUT, 7) /* (AE25) PRG0_PRU1_GPO14.GPIO0_77 */
> + J721E_IOPAD(0x13c, PIN_INPUT, 7) /* (AF29) PRG0_PRU1_GPO15.GPIO0_78 */
> + >;
> + };
> +
> + main_i2c3_pins_default: main-i2c3-pins-default {
> + pinctrl-single,pins = <
> + J721E_IOPAD(0x270, PIN_INPUT_PULLUP, 4) /* (T26) MMC2_CLK.I2C3_SCL */
> + J721E_IOPAD(0x274, PIN_INPUT_PULLUP, 4) /* (T25) MMC2_CMD.I2C3_SDA */
> + >;
> + };
> +
> + main_i2c4_pins_default: main_i2c4_pins_default {
> + pinctrl-single,pins = <
> + J721E_IOPAD(0x1e0, PIN_INPUT_PULLUP, 2) /* (Y5) SPI1_D0.I2C4_SCL */
> + J721E_IOPAD(0x1dc, PIN_INPUT_PULLUP, 2) /* (Y1) SPI1_CLK.I2C4_SDA */
> + J721E_IOPAD(0x30, PIN_INPUT, 7) /* (AF24) PRG1_PRU0_GPO11.GPIO0_12 */
> + J721E_IOPAD(0x34, PIN_INPUT, 7) /* (AJ24) PRG1_PRU0_GPO12.GPIO0_13 */
> + >;
> + };
> +
> + main_i2c5_pins_default: main-i2c5-pins-default {
> + pinctrl-single,pins = <
> + J721E_IOPAD(0x150, PIN_INPUT_PULLUP, 2) /* (Y26) PRG0_MDIO0_MDIO.I2C5_SCL */
> + J721E_IOPAD(0x154, PIN_INPUT_PULLUP, 2) /* (AA27) PRG0_MDIO0_MDC.I2C5_SDA */
> + >;
> + };
> +
> + main_i2c6_pins_default: main_i2c6_pins_default {
> + pinctrl-single,pins = <
> + J721E_IOPAD(0x1d0, PIN_INPUT_PULLUP, 2) /* (AA3) SPI0_D1.I2C6_SCL */
> + J721E_IOPAD(0x1e4, PIN_INPUT_PULLUP, 2) /* (Y2) SPI1_D1.I2C6_SDA */
> + J721E_IOPAD(0x74, PIN_INPUT, 7) /* (AC21) PRG1_PRU1_GPO7.GPIO0_28 */
> + J721E_IOPAD(0xa4, PIN_INPUT, 7) /* (AH22) PRG1_PRU1_GPO19.GPIO0_40 */
> + >;
> + };
> +

Please address following warnings with make dtbs W=12

+arch/arm64/boot/dts/ti/k3-j721e-beagleboneai64.dts: /bus@100000/pinctrl@11c000/main_i2c2_pins_default: Character '_' not recommended in node name
+arch/arm64/boot/dts/ti/k3-j721e-beagleboneai64.dts: /bus@100000/pinctrl@11c000/main_i2c4_pins_default: Character '_' not recommended in node name
+arch/arm64/boot/dts/ti/k3-j721e-beagleboneai64.dts: /bus@100000/pinctrl@11c000/main_i2c6_pins_default: Character '_' not recommended in node name

\
 
 \ /
  Last update: 2022-09-03 09:08    [W:0.075 / U:0.300 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site