lkml.org 
[lkml]   [2022]   [Sep]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
SubjectRe: [PATCH v9 3/4] phy: freescale: imx8m-pcie: Refine i.MX8MM PCIe PHY driver
On 26-09-22, 14:41, Richard Zhu wrote:
> To make it more flexible and easy to expand. Refine i.MX8MM PCIe PHY
> driver.
> - Use gpr compatible string to avoid the codes duplications when add
> another platform PCIe PHY support.
> - Re-orange the codes to let it more flexible and easy to expand.
> No functions changes basicly.
>
> Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
> Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
> Tested-by: Marek Vasut <marex@denx.de>
> Tested-by: Richard Leitner <richard.leitner@skidata.com>
> Tested-by: Alexander Stein <alexander.stein@ew.tq-group.com>
> Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
> ---
> drivers/phy/freescale/phy-fsl-imx8m-pcie.c | 108 +++++++++++++--------
> 1 file changed, 68 insertions(+), 40 deletions(-)
>
> diff --git a/drivers/phy/freescale/phy-fsl-imx8m-pcie.c b/drivers/phy/freescale/phy-fsl-imx8m-pcie.c
> index 2377ed307b53..9752818fe990 100644
> --- a/drivers/phy/freescale/phy-fsl-imx8m-pcie.c
> +++ b/drivers/phy/freescale/phy-fsl-imx8m-pcie.c
> @@ -11,6 +11,7 @@
> #include <linux/mfd/syscon.h>
> #include <linux/mfd/syscon/imx7-iomuxc-gpr.h>
> #include <linux/module.h>
> +#include <linux/of_device.h>
> #include <linux/phy/phy.h>
> #include <linux/platform_device.h>
> #include <linux/regmap.h>
> @@ -45,6 +46,15 @@
> #define IMX8MM_GPR_PCIE_SSC_EN BIT(16)
> #define IMX8MM_GPR_PCIE_AUX_EN_OVERRIDE BIT(9)
>
> +enum imx8_pcie_phy_type {
> + IMX8MM,
> +};
> +
> +struct imx8_pcie_phy_drvdata {
> + enum imx8_pcie_phy_type variant;
> + const char *gpr;
> +};
> +
> struct imx8_pcie_phy {
> void __iomem *base;
> struct clk *clk;
> @@ -55,6 +65,7 @@ struct imx8_pcie_phy {
> u32 tx_deemph_gen1;
> u32 tx_deemph_gen2;
> bool clkreq_unused;
> + const struct imx8_pcie_phy_drvdata *drvdata;
> };
>
> static int imx8_pcie_phy_init(struct phy *phy)
> @@ -66,31 +77,17 @@ static int imx8_pcie_phy_init(struct phy *phy)
> reset_control_assert(imx8_phy->reset);
>
> pad_mode = imx8_phy->refclk_pad_mode;
> - /* Set AUX_EN_OVERRIDE 1'b0, when the CLKREQ# isn't hooked */
> - regmap_update_bits(imx8_phy->iomuxc_gpr, IOMUXC_GPR14,
> - IMX8MM_GPR_PCIE_AUX_EN_OVERRIDE,
> - imx8_phy->clkreq_unused ?
> - 0 : IMX8MM_GPR_PCIE_AUX_EN_OVERRIDE);
> - regmap_update_bits(imx8_phy->iomuxc_gpr, IOMUXC_GPR14,
> - IMX8MM_GPR_PCIE_AUX_EN,
> - IMX8MM_GPR_PCIE_AUX_EN);
> - regmap_update_bits(imx8_phy->iomuxc_gpr, IOMUXC_GPR14,
> - IMX8MM_GPR_PCIE_POWER_OFF, 0);
> - regmap_update_bits(imx8_phy->iomuxc_gpr, IOMUXC_GPR14,
> - IMX8MM_GPR_PCIE_SSC_EN, 0);
> -
> - regmap_update_bits(imx8_phy->iomuxc_gpr, IOMUXC_GPR14,
> - IMX8MM_GPR_PCIE_REF_CLK_SEL,
> - pad_mode == IMX8_PCIE_REFCLK_PAD_INPUT ?
> - IMX8MM_GPR_PCIE_REF_CLK_EXT :
> - IMX8MM_GPR_PCIE_REF_CLK_PLL);
> - usleep_range(100, 200);
> -
> - /* Do the PHY common block reset */
> - regmap_update_bits(imx8_phy->iomuxc_gpr, IOMUXC_GPR14,
> - IMX8MM_GPR_PCIE_CMN_RST,
> - IMX8MM_GPR_PCIE_CMN_RST);
> - usleep_range(200, 500);
> + switch (imx8_phy->drvdata->variant) {
> + case IMX8MM:
> + /* Tune PHY de-emphasis setting to pass PCIe compliance. */
> + if (imx8_phy->tx_deemph_gen1)
> + writel(imx8_phy->tx_deemph_gen1,
> + imx8_phy->base + PCIE_PHY_TRSV_REG5);
> + if (imx8_phy->tx_deemph_gen2)
> + writel(imx8_phy->tx_deemph_gen2,
> + imx8_phy->base + PCIE_PHY_TRSV_REG6);
> + break;
> + }
>
> if (pad_mode == IMX8_PCIE_REFCLK_PAD_INPUT ||
> pad_mode == IMX8_PCIE_REFCLK_PAD_UNUSED) {
> @@ -118,15 +115,37 @@ static int imx8_pcie_phy_init(struct phy *phy)
> imx8_phy->base + IMX8MM_PCIE_PHY_CMN_REG065);
> }
>
> - /* Tune PHY de-emphasis setting to pass PCIe compliance. */
> - if (imx8_phy->tx_deemph_gen1)
> - writel(imx8_phy->tx_deemph_gen1,
> - imx8_phy->base + PCIE_PHY_TRSV_REG5);
> - if (imx8_phy->tx_deemph_gen2)
> - writel(imx8_phy->tx_deemph_gen2,
> - imx8_phy->base + PCIE_PHY_TRSV_REG6);
> + /* Set AUX_EN_OVERRIDE 1'b0, when the CLKREQ# isn't hooked */
> + regmap_update_bits(imx8_phy->iomuxc_gpr, IOMUXC_GPR14,
> + IMX8MM_GPR_PCIE_AUX_EN_OVERRIDE,
> + imx8_phy->clkreq_unused ?
> + 0 : IMX8MM_GPR_PCIE_AUX_EN_OVERRIDE);
> + regmap_update_bits(imx8_phy->iomuxc_gpr, IOMUXC_GPR14,
> + IMX8MM_GPR_PCIE_AUX_EN,
> + IMX8MM_GPR_PCIE_AUX_EN);
> + regmap_update_bits(imx8_phy->iomuxc_gpr, IOMUXC_GPR14,
> + IMX8MM_GPR_PCIE_POWER_OFF, 0);
> + regmap_update_bits(imx8_phy->iomuxc_gpr, IOMUXC_GPR14,
> + IMX8MM_GPR_PCIE_SSC_EN, 0);
>
> - reset_control_deassert(imx8_phy->reset);
> + regmap_update_bits(imx8_phy->iomuxc_gpr, IOMUXC_GPR14,
> + IMX8MM_GPR_PCIE_REF_CLK_SEL,
> + pad_mode == IMX8_PCIE_REFCLK_PAD_INPUT ?
> + IMX8MM_GPR_PCIE_REF_CLK_EXT :
> + IMX8MM_GPR_PCIE_REF_CLK_PLL);
> + usleep_range(100, 200);
> +
> + /* Do the PHY common block reset */
> + regmap_update_bits(imx8_phy->iomuxc_gpr, IOMUXC_GPR14,
> + IMX8MM_GPR_PCIE_CMN_RST,
> + IMX8MM_GPR_PCIE_CMN_RST);
> +
> + switch (imx8_phy->drvdata->variant) {
> + case IMX8MM:
> + reset_control_deassert(imx8_phy->reset);
> + usleep_range(200, 500);
> + break;
> + }
>
> /* Polling to check the phy is ready or not. */
> ret = readl_poll_timeout(imx8_phy->base + IMX8MM_PCIE_PHY_CMN_REG075,
> @@ -157,6 +176,19 @@ static const struct phy_ops imx8_pcie_phy_ops = {
> .owner = THIS_MODULE,
> };
>
> +static const struct imx8_pcie_phy_drvdata drvdata[] = {
> + [IMX8MM] = {
> + .variant = IMX8MM,
> + .gpr = "fsl,imx8mm-iomuxc-gpr",
> + },
> +};

Pls drop the array...

static const struct imx8_pcie_phy_drvdata imx8mm_drvdata = {
.variant = IMX8MM,
.gpr = "fsl,imx8mm-iomuxc-gpr",
};



> +
> +static const struct of_device_id imx8_pcie_phy_of_match[] = {
> + {.compatible = "fsl,imx8mm-pcie-phy", .data = &drvdata[IMX8MM], },

So this becomes:

{.compatible = "fsl,imx8mm-pcie-phy", .data = &imx8mm_drvdata },

you can define new structs for newer SoCs

> + { },
> +};
> +MODULE_DEVICE_TABLE(of, imx8_pcie_phy_of_match);
> +
> static int imx8_pcie_phy_probe(struct platform_device *pdev)
> {
> struct phy_provider *phy_provider;
> @@ -169,6 +201,8 @@ static int imx8_pcie_phy_probe(struct platform_device *pdev)
> if (!imx8_phy)
> return -ENOMEM;
>
> + imx8_phy->drvdata = of_device_get_match_data(dev);
> +
> /* get PHY refclk pad mode */
> of_property_read_u32(np, "fsl,refclk-pad-mode",
> &imx8_phy->refclk_pad_mode);
> @@ -194,7 +228,7 @@ static int imx8_pcie_phy_probe(struct platform_device *pdev)
>
> /* Grab GPR config register range */
> imx8_phy->iomuxc_gpr =
> - syscon_regmap_lookup_by_compatible("fsl,imx6q-iomuxc-gpr");
> + syscon_regmap_lookup_by_compatible(imx8_phy->drvdata->gpr);
> if (IS_ERR(imx8_phy->iomuxc_gpr)) {
> dev_err(dev, "unable to find iomuxc registers\n");
> return PTR_ERR(imx8_phy->iomuxc_gpr);
> @@ -222,12 +256,6 @@ static int imx8_pcie_phy_probe(struct platform_device *pdev)
> return PTR_ERR_OR_ZERO(phy_provider);
> }
>
> -static const struct of_device_id imx8_pcie_phy_of_match[] = {
> - {.compatible = "fsl,imx8mm-pcie-phy",},
> - { },
> -};
> -MODULE_DEVICE_TABLE(of, imx8_pcie_phy_of_match);
> -
> static struct platform_driver imx8_pcie_phy_driver = {
> .probe = imx8_pcie_phy_probe,
> .driver = {
> --
> 2.25.1

--
~Vinod

\
 
 \ /
  Last update: 2022-09-29 08:32    [W:0.078 / U:0.032 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site