lkml.org 
[lkml]   [2022]   [Sep]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH v3 RESEND] thermal: qoriq: Only enable sites that actually exist
Date
On wtorek, 27 września 2022 10:34:00 CEST Daniel Lezcano wrote:
> Hi Sebastian,
>
> On 27/09/2022 08:15, Sebastian Krzyszkowiak wrote:
> > On i.MX8MQ, enabling monitoring sites that aren't connected to anything
> > can cause unwanted side effects on some units. This seems to happen
> > once some of these sites report out-of-range readings and results in
> > sensor misbehavior, such as thermal zone readings getting stuck or even
> > suddenly reporting an impossibly high value, triggering emergency
> > shutdowns.
> >
> > The datasheet lists all non-existent sites as "reserved" and doesn't
> > make any guarantees about being able to enable them at all, so let's
> > not do that. Instead, iterate over sensor DT nodes and only enable
> > monitoring sites that are specified there prior to registering their
> > thermal zones. This still fixes the issue with bogus data being
> > reported on the first reading, but doesn't introduce problems that
> > come with reading from non-existent sites.
>
> Can you have a look at these patches:
>
> https://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux.git/commit/?h=
> thermal/linux-next&id=ab2266ecaa3254811f9f83992cf53fdfe3c62c86
>
> and
>
> https://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux.git/commit/?h=
> thermal/linux-next&id=7be4288625df54887b444991d743c6e1af21e27a
>
> Thanks
> -- Daniel


Hi Daniel,

I'm not sure if that's a good idea. qoriq-thermal has used
thermal_zone_of_get_sensor_id up until 45038e03d633, which was a change meant
to fix a bug with bogus data being present on the first report (as zones were
being registered before their monitoring was being enabled), but it was done
is a problematic way that introduced erratic behavior. The only ways to fix
this regression that I see are either to make the driver aware of which zones
are present on particular platform (like my patch does by using
thermal_zone_of_get_sensor_id again), or to have some way to attempt
registering a thermal zone that isn't necessarily ready to report data yet.

Looking at device trees where qoriq-thermal is used, it seems like zone
configuration is pretty diverse across SoCs:

arm/ls1021a.dtsi: 0 cpu_thermal
arm64/fsl-ls1012a.dtsi: 0 cpu_thermal
arm64/fsl-ls1028a.dtsi: 0 ddr_controller 1 core_cluster
arm64/fsl-ls1043a.dtsi: 0 ddr_controller 1 serdes 2 fman 3 core-cluster 4 sec
arm64/fsl-ls1046a.dtsi: 0 ddr_controller 1 serdes 2 fman 3 core-cluster 4 sec
arm64/fsl-ls1088a.dtsi: 0 core-cluser 1 soc
arm64/fsl-ls208xa.dtsi: 1 ddr-controller1 2 ddr-controller2 3 ddr-controller3
4 core-cluster1 5 core-cluster2 6 core-cluster3 7 core-cluster4
arm64/fsl-lx2160a.dtsi: 0 cluster6-7 1 ddr-cluster5 2 wriop 3 dce-qbman-hsio2
4 ccn-dpaa-tbu 5 cluster4-hsio3 6 cluster2-3
arm64/imx8mq.dtsi: 0 cpu-thermal 1 gpu-thermal 2 vpu-thermal
powerpc/t1023si-post.dtsi: 0 cpu_thermal
powerpc/t1040si-post.dtsi: 2 cpu_thermal

I haven't checked dts files where those get included, but I believe it's rather
unlikely that any additional zones are defined there.

Do you mean that this should all go as platform data into the driver? If so,
should all the calibration data that's currently in device trees go there as
well? (if not, why not?)

Cheers,
Sebastian

> > Fixes: 45038e03d633 ("thermal: qoriq: Enable all sensors before
> > registering them") Cc: stable@vger.kernel.org
> > Signed-off-by: Sebastian Krzyszkowiak <sebastian.krzyszkowiak@puri.sm>
> > ---
> > Resent <20220321170852.654094-1-sebastian.krzyszkowiak@puri.sm>
> > v3: add cc: stable
> > v2: augment the commit message with details on what the patch is doing
> > ---
> >
> > drivers/thermal/qoriq_thermal.c | 63 ++++++++++++++++++++++-----------
> > 1 file changed, 43 insertions(+), 20 deletions(-)
> >
> > diff --git a/drivers/thermal/qoriq_thermal.c
> > b/drivers/thermal/qoriq_thermal.c index 73049f9bea25..ef0848849ee2 100644
> > --- a/drivers/thermal/qoriq_thermal.c
> > +++ b/drivers/thermal/qoriq_thermal.c
> > @@ -32,7 +32,6 @@
> >
> > #define TMR_DISABLE 0x0
> > #define TMR_ME 0x80000000
> > #define TMR_ALPF 0x0c000000
> >
> > -#define TMR_MSITE_ALL GENMASK(15, 0)
> >
> > #define REGS_TMTMIR 0x008 /* Temperature measurement interval
Register
> > */
> > #define TMTMIR_DEFAULT 0x0000000f
> >
> > @@ -129,33 +128,51 @@ static const struct thermal_zone_of_device_ops
> > tmu_tz_ops = {>
> > static int qoriq_tmu_register_tmu_zone(struct device *dev,
> >
> > struct qoriq_tmu_data
*qdata)
> >
> > {
> >
> > - int id;
> > + int ret = 0;
> > + struct device_node *np, *child, *sensor_np;
> >
> > - if (qdata->ver == TMU_VER1) {
> > - regmap_write(qdata->regmap, REGS_TMR,
> > - TMR_MSITE_ALL | TMR_ME | TMR_ALPF);
> > - } else {
> > - regmap_write(qdata->regmap, REGS_V2_TMSR,
TMR_MSITE_ALL);
> > - regmap_write(qdata->regmap, REGS_TMR, TMR_ME |
TMR_ALPF_V2);
> > - }
> > + np = of_find_node_by_name(NULL, "thermal-zones");
> > + if (!np)
> > + return -ENODEV;
> > +
> > + sensor_np = of_node_get(dev->of_node);
> >
> > - for (id = 0; id < SITES_MAX; id++) {
> > + for_each_available_child_of_node(np, child) {
> >
> > struct thermal_zone_device *tzd;
> >
> > - struct qoriq_sensor *sensor = &qdata->sensor[id];
> > - int ret;
> > + struct qoriq_sensor *sensor;
> > + int id, site;
> > +
> > + ret = thermal_zone_of_get_sensor_id(child, sensor_np,
&id);
> > +
> > + if (ret < 0) {
> > + dev_err(dev, "failed to get valid sensor id:
%d\n", ret);
> > + of_node_put(child);
> > + break;
> > + }
> >
> > + sensor = &qdata->sensor[id];
> >
> > sensor->id = id;
> >
> > + /* Enable monitoring */
> > + if (qdata->ver == TMU_VER1) {
> > + site = 0x1 << (15 - id);
> > + regmap_update_bits(qdata->regmap, REGS_TMR,
> > + site | TMR_ME |
TMR_ALPF,
> > + site | TMR_ME |
TMR_ALPF);
> > + } else {
> > + site = 0x1 << id;
> > + regmap_update_bits(qdata->regmap,
REGS_V2_TMSR, site, site);
> > + regmap_write(qdata->regmap, REGS_TMR, TMR_ME
| TMR_ALPF_V2);
> > + }
> > +
> >
> > tzd = devm_thermal_zone_of_sensor_register(dev, id,
> >
> >
sensor,
> >
&tmu_tz_ops);
> >
> > - ret = PTR_ERR_OR_ZERO(tzd);
> > - if (ret) {
> > - if (ret == -ENODEV)
> > - continue;
> > -
> > - regmap_write(qdata->regmap, REGS_TMR,
TMR_DISABLE);
> > - return ret;
> > + if (IS_ERR(tzd)) {
> > + ret = PTR_ERR(tzd);
> > + dev_err(dev, "failed to register thermal
zone: %d\n", ret);
> > + of_node_put(child);
> > + break;
> >
> > }
> >
> > if (devm_thermal_add_hwmon_sysfs(tzd))
> >
> > @@ -164,7 +181,13 @@ static int qoriq_tmu_register_tmu_zone(struct device
> > *dev,>
> > }
> >
> > - return 0;
> > + of_node_put(sensor_np);
> > + of_node_put(np);
> > +
> > + if (ret)
> > + regmap_write(qdata->regmap, REGS_TMR, TMR_DISABLE);
> > +
> > + return ret;
> >
> > }
> >
> > static int qoriq_tmu_calibration(struct device *dev,




\
 
 \ /
  Last update: 2022-09-28 16:06    [W:0.047 / U:0.556 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site