lkml.org 
[lkml]   [2022]   [Sep]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
Subject[irqchip: irq/irqchip-next] dt-bindings: irqchip: Describe the IMX MU block as a MSI controller
The following commit has been merged into the irq/irqchip-next branch of irqchip:

Commit-ID: 27c0141e094e45e875ccc1f299458db6433c1e55
Gitweb: https://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms/27c0141e094e45e875ccc1f299458db6433c1e55
Author: Frank Li <Frank.Li@nxp.com>
AuthorDate: Thu, 22 Sep 2022 11:12:44 -05:00
Committer: Marc Zyngier <maz@kernel.org>
CommitterDate: Wed, 28 Sep 2022 14:24:32 +01:00

dt-bindings: irqchip: Describe the IMX MU block as a MSI controller

I.MX MU supports generating IRQs by writing to a register.

Describe its use as a MSI controller so that other blocks (such as a PCI EP)
can use it directly.

Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
[maz: commit message]
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220922161246.20586-5-Frank.Li@nxp.com
---
Documentation/devicetree/bindings/interrupt-controller/fsl,mu-msi.yaml | 99 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++-
1 file changed, 99 insertions(+)
create mode 100644 Documentation/devicetree/bindings/interrupt-controller/fsl,mu-msi.yaml

diff --git a/Documentation/devicetree/bindings/interrupt-controller/fsl,mu-msi.yaml b/Documentation/devicetree/bindings/interrupt-controller/fsl,mu-msi.yaml
new file mode 100644
index 0000000..799ae5c
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/fsl,mu-msi.yaml
@@ -0,0 +1,99 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/fsl,mu-msi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale/NXP i.MX Messaging Unit (MU) work as msi controller
+
+maintainers:
+ - Frank Li <Frank.Li@nxp.com>
+
+description: |
+ The Messaging Unit module enables two processors within the SoC to
+ communicate and coordinate by passing messages (e.g. data, status
+ and control) through the MU interface. The MU also provides the ability
+ for one processor (A side) to signal the other processor (B side) using
+ interrupts.
+
+ Because the MU manages the messaging between processors, the MU uses
+ different clocks (from each side of the different peripheral buses).
+ Therefore, the MU must synchronize the accesses from one side to the
+ other. The MU accomplishes synchronization using two sets of matching
+ registers (Processor A-side, Processor B-side).
+
+ MU can work as msi interrupt controller to do doorbell
+
+allOf:
+ - $ref: /schemas/interrupt-controller/msi-controller.yaml#
+
+properties:
+ compatible:
+ enum:
+ - fsl,imx6sx-mu-msi
+ - fsl,imx7ulp-mu-msi
+ - fsl,imx8ulp-mu-msi
+ - fsl,imx8ulp-mu-msi-s4
+
+ reg:
+ items:
+ - description: a side register base address
+ - description: b side register base address
+
+ reg-names:
+ items:
+ - const: processor-a-side
+ - const: processor-b-side
+
+ interrupts:
+ description: a side interrupt number.
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+ power-domains:
+ items:
+ - description: a side power domain
+ - description: b side power domain
+
+ power-domain-names:
+ items:
+ - const: processor-a-side
+ - const: processor-b-side
+
+ interrupt-controller: true
+
+ msi-controller: true
+
+ "#msi-cells":
+ const: 0
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - interrupt-controller
+ - msi-controller
+ - "#msi-cells"
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/firmware/imx/rsrc.h>
+
+ msi-controller@5d270000 {
+ compatible = "fsl,imx6sx-mu-msi";
+ msi-controller;
+ #msi-cells = <0>;
+ interrupt-controller;
+ reg = <0x5d270000 0x10000>, /* A side */
+ <0x5d300000 0x10000>; /* B side */
+ reg-names = "processor-a-side", "processor-b-side";
+ interrupts = <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>;
+ power-domains = <&pd IMX_SC_R_MU_12A>,
+ <&pd IMX_SC_R_MU_12B>;
+ power-domain-names = "processor-a-side", "processor-b-side";
+ };
\
 
 \ /
  Last update: 2022-09-28 15:38    [W:0.110 / U:0.400 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site