lkml.org 
[lkml]   [2022]   [Sep]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH v1 2/2] dt-bindings: add bindings for QCOM flash LED
Date
On Wed, 28 Sep 2022 10:42:39 +0800, Fenglin Wu wrote:
> Add binding document for flash LED module inside Qualcomm Technologies,
> Inc. PMICs.
>
> Signed-off-by: Fenglin Wu <quic_fenglinw@quicinc.com>
> ---
> .../bindings/leds/leds-qcom-flash.yaml | 108 ++++++++++++++++++
> 1 file changed, 108 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/leds/leds-qcom-flash.yaml
>

My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
on your patch (DT_CHECKER_FLAGS is new in v5.13):

yamllint warnings/errors:

dtschema/dtc warnings/errors:
Documentation/devicetree/bindings/leds/leds-qcom-flash.example.dts:21.17-32: Warning (reg_format): /example-0/flash-led@ee00:reg: property has invalid length (4 bytes) (#address-cells == 1, #size-cells == 1)
Documentation/devicetree/bindings/leds/leds-qcom-flash.example.dts:23.23-31.19: Warning (unit_address_vs_reg): /example-0/flash-led@ee00/led@0: node has a unit name, but no reg or ranges property
Documentation/devicetree/bindings/leds/leds-qcom-flash.example.dts:33.23-41.19: Warning (unit_address_vs_reg): /example-0/flash-led@ee00/led@1: node has a unit name, but no reg or ranges property
Documentation/devicetree/bindings/leds/leds-qcom-flash.example.dtb: Warning (pci_device_reg): Failed prerequisite 'reg_format'
Documentation/devicetree/bindings/leds/leds-qcom-flash.example.dtb: Warning (pci_device_bus_num): Failed prerequisite 'reg_format'
Documentation/devicetree/bindings/leds/leds-qcom-flash.example.dtb: Warning (simple_bus_reg): Failed prerequisite 'reg_format'
Documentation/devicetree/bindings/leds/leds-qcom-flash.example.dtb: Warning (i2c_bus_reg): Failed prerequisite 'reg_format'
Documentation/devicetree/bindings/leds/leds-qcom-flash.example.dtb: Warning (spi_bus_reg): Failed prerequisite 'reg_format'

doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/patch/

This check can fail if there are any dependencies. The base for a patch
series is generally the most recent rc1.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit.

\
 
 \ /
  Last update: 2022-09-28 14:39    [W:0.054 / U:0.724 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site