lkml.org 
[lkml]   [2022]   [Sep]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH v2] dt-bindings: net: marvell,pp2: convert to json-schema
From
On 27/09/2022 01:21, Michał Grzelak wrote:
> This converts the marvell,pp2 bindings from text to proper schema.
>
> Move 'marvell,system-controller' and 'dma-coherent' properties from
> port up to the controller node, to match what is actually done in DT.
>
> Signed-off-by: Michał Grzelak <mig@semihalf.com>
> ---
> .../devicetree/bindings/net/marvell,pp2.yaml | 241 ++++++++++++++++++
> .../devicetree/bindings/net/marvell-pp2.txt | 141 ----------

Thank you for your patch. There is something to discuss/improve.


> +properties:
> + compatible:
> + enum:
> + - marvell,armada-375-pp2
> + - marvell,armada-7k-pp22
> +
> + reg:
> + minItems: 3
> + maxItems: 4
> + description: |
> + For "marvell,armada-375-pp2", must contain the following register sets:
> + - common controller registers
> + - LMS registers
> + - one register area per Ethernet port
> + For "marvell,armada-7k-pp22" used by 7K/8K and CN913X, must contain the following register sets:
> + - packet processor registers
> + - networking interfaces registers
> + - CM3 address space used for TX Flow Control

Instead of this description, in define them for each variant in
allOf:if:then (just like for clocks below)

> +
> + clocks:
> + minItems: 2
> + items:
> + - description: main controller clock
> + - description: GOP clock
> + - description: MG clock
> + - description: MG Core clock
> + - description: AXI clock

This needs to be restricted per variant - minItems and maxItems in
allOf:if:then.

> +
> + clock-names:
> + minItems: 2
> + items:
> + - const: pp_clk
> + - const: gop_clk
> + - const: mg_clk
> + - const: mg_core_clk
> + - const: axi_clk

The same.

> +
> + dma-coherent: true
> + '#size-cells': true
> + '#address-cells': true

You need const:X for both cells (unless they come from some other schema
but then you would not need to list them here).

> +
> + marvell,system-controller:
> + $ref: /schemas/types.yaml#/definitions/phandle
> + description: a phandle to the system controller.
> +
> +patternProperties:
> + '^eth[0-9a-f]*(@.*)?$':

The name should be "(ethernet-)?port", unless anything depends on
particular naming?

> + type: object

You need description here.

> + properties:
> + interrupts:
> + minItems: 1
> + maxItems: 10
> + description: interrupt(s) for the port
> +
> + interrupt-names:
> + items:

minItems: 1

> + - const: hif0
> + - const: hif1
> + - const: hif2
> + - const: hif3
> + - const: hif4
> + - const: hif5
> + - const: hif6
> + - const: hif7
> + - const: hif8
> + - const: link
> +
> + description: >
> + if more than a single interrupt for is given, must be the
> + name associated to the interrupts listed. Valid names are:
> + "hifX", with X in [0..8], and "link". The names "tx-cpu0",
> + "tx-cpu1", "tx-cpu2", "tx-cpu3" and "rx-shared" are supported
> + for backward compatibility but shouldn't be used for new
> + additions.
> +
> + port-id:
> + $ref: /schemas/types.yaml#/definitions/uint32
> + description: ID of the port from the MAC point of view.
> +
> + phy:
> + $ref: /schemas/types.yaml#/definitions/phandle
> + description: >
> + a phandle to a phy node defining the PHY address
> + (as the reg property, a single integer).
> +
> + phy-mode:
> + $ref: "ethernet-controller.yaml#/properties/phy-mode"

You can skip quotes.

> +
> + marvell,loopback:
> + $ref: /schemas/types.yaml#/definitions/flag
> + description: port is loopback mode.
> +
> + gop-port-id:
> + $ref: /schemas/types.yaml#/definitions/uint32
> + description: >
> + only for marvell,armada-7k-pp22, ID of the port from the
> + GOP (Group Of Ports) point of view. This ID is used to index the
> + per-port registers in the second register area.
> +
> + required:
> + - interrupts
> + - port-id
> + - phy-mode
> +
> +required:
> + - compatible
> + - reg
> + - clocks
> + - clock-names
> +
> +allOf:
> + - $ref: ethernet-controller.yaml#
> + - if:
> + properties:
> + compatible:
> + const: marvell,armada-7k-pp22
> + then:
> + patternProperties:
> + '^eth[0-9a-f]*(@.*)?$':
> + required:
> + - gop-port-id

else:
patternProperties:
....
gop-port-id: false

> +
> +unevaluatedProperties: false
> +
> +examples:
> + - |

Best regards,
Krzysztof

\
 
 \ /
  Last update: 2022-09-28 09:51    [W:0.080 / U:0.176 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site