lkml.org 
[lkml]   [2022]   [Sep]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
SubjectRe: [PATCH] ALSA: hda/hdmi: run eld notify in delay work
On Wed, 28 Sep 2022 04:06:45 +0200,
Lu, Brent wrote:
>
> > >
> > > During resolution change, display driver would disable HDMI audio then
> > > enable it in a short time. There is possibility that eld notify for
> > > HDMI audio enable is called when previous runtime suspend is still
> > > running. In this case, the elf nofity just returns and not updating
> > > the status of corresponding HDMI pin/port. Here we move the eld nofity
> > > to a delay work so we don't lose it.
> > >
> > > Signed-off-by: Brent Lu <brent.lu@intel.com>
> >
> > We have already a dedicated per-pin work for the delayed ELD check.
> > Can we reuse it instead of inventing yet another work?
> > More work needs more cares, and better to avoid unless really needed (e.g.
> > you forgot cleanup at suspend/removal in this patch).
> >
> >
> > thanks,
> >
> > Takashi
>
> Hi Takashi,
>
> I've checked the hdmi_repoll_eld() and check_presence_and_report() function to see
> if we can reuse the per-pin work. I've some questions about reusing the per-pin work:
>
> 1. hdmi_repoll_eld() calls snd_hda_jack_tbl_get_mst() function while
> check_presence_and_report() doesn't. Is it ok?

For the system with the audio component, there is no jack entry, hence
this will be ignored.

> 2. snd_hdac_i915_set_bclk() is called in intel_pin_eld_notify() function. Since it's
> skipped, we need to call it in the per-pin work. Need to add a flag in hdmi_spec_per_pin
> to indicate this situation.

Yeah, I guess this was already a bug. It implies that the set_bclk()
call is missing in the suspend/resume case, too. We need to call it
more consistently.

> 3. We can schedule the per-pin work in intel_pin_eld_notify() when snd_hdac_is_in_pm()
> returns true but there is no guarantee the runtime suspend will finished when the per-pin
> work is schedule to run.

On the second thought, we may simply proceed the notification if it's
in a valid context. The only period to prohibit the update is during
the suspend/resume until the ELD is updated by the resume itself.
So, something like below may work instead. Could you give it a try?


Takashi

-- 8< --
--- a/sound/pci/hda/patch_hdmi.c
+++ b/sound/pci/hda/patch_hdmi.c
@@ -83,6 +83,7 @@ struct hdmi_spec_per_pin {
int pcm_idx; /* which pcm is attached. -1 means no pcm is attached */
int repoll_count;
bool setup; /* the stream has been set up by prepare callback */
+ bool eld_update_frozen;
bool silent_stream;
int channels; /* current number of channels */
bool non_pcm;
@@ -788,16 +789,28 @@ static void hdmi_setup_audio_infoframe(struct hda_codec *codec,

static void hdmi_present_sense(struct hdmi_spec_per_pin *per_pin, int repoll);

-static void check_presence_and_report(struct hda_codec *codec, hda_nid_t nid,
- int dev_id)
+static struct hdmi_spec_per_pin *
+get_pin_from_nid(struct hda_codec *codec, hda_nid_t nid, int dev_id)
{
struct hdmi_spec *spec = codec->spec;
int pin_idx = pin_id_to_pin_index(codec, nid, dev_id);

if (pin_idx < 0)
+ return NULL;
+ return get_pin(spec, pin_idx);
+}
+
+static void check_presence_and_report(struct hda_codec *codec, hda_nid_t nid,
+ int dev_id)
+{
+ struct hdmi_spec *spec = codec->spec;
+ struct hdmi_spec_per_pin *per_pin;
+
+ per_pin = get_pin_from_nid(codec, nid, dev_id);
+ if (!per_pin)
return;
mutex_lock(&spec->pcm_lock);
- hdmi_present_sense(get_pin(spec, pin_idx), 1);
+ hdmi_present_sense(per_pin, 1);
mutex_unlock(&spec->pcm_lock);
}

@@ -1582,6 +1595,7 @@ static void update_eld(struct hda_codec *codec,
snd_jack_report(pcm_jack,
(eld->monitor_present && eld->eld_valid) ?
SND_JACK_AVOUT : 0);
+ per_pin->eld_update_frozen = false;
}

/* update ELD and jack state via HD-audio verbs */
@@ -2494,6 +2508,7 @@ static int generic_hdmi_suspend(struct hda_codec *codec)
for (pin_idx = 0; pin_idx < spec->num_pins; pin_idx++) {
struct hdmi_spec_per_pin *per_pin = get_pin(spec, pin_idx);
cancel_delayed_work_sync(&per_pin->work);
+ per_pin->eld_update_frozen = true;
}
return 0;
}
@@ -2656,6 +2671,7 @@ static void generic_acomp_pin_eld_notify(void *audio_ptr, int port, int dev_id)
struct hda_codec *codec = audio_ptr;
struct hdmi_spec *spec = codec->spec;
hda_nid_t pin_nid = spec->port2pin(codec, port);
+ struct hdmi_spec_per_pin *per_pin;

if (!pin_nid)
return;
@@ -2667,7 +2683,8 @@ static void generic_acomp_pin_eld_notify(void *audio_ptr, int port, int dev_id)
if (codec->core.dev.power.power_state.event == PM_EVENT_SUSPEND)
return;
/* ditto during suspend/resume process itself */
- if (snd_hdac_is_in_pm(&codec->core))
+ per_pin = get_pin_from_nid(codec, pin_nid, dev_id);
+ if (!per_pin || per_pin->eld_update_frozen)
return;

check_presence_and_report(codec, pin_nid, dev_id);
@@ -2841,6 +2858,7 @@ static int intel_port2pin(struct hda_codec *codec, int port)
static void intel_pin_eld_notify(void *audio_ptr, int port, int pipe)
{
struct hda_codec *codec = audio_ptr;
+ struct hdmi_spec_per_pin *per_pin;
int pin_nid;
int dev_id = pipe;

@@ -2853,7 +2871,8 @@ static void intel_pin_eld_notify(void *audio_ptr, int port, int pipe)
if (codec->core.dev.power.power_state.event == PM_EVENT_SUSPEND)
return;
/* ditto during suspend/resume process itself */
- if (snd_hdac_is_in_pm(&codec->core))
+ per_pin = get_pin_from_nid(codec, pin_nid, dev_id);
+ if (!per_pin || per_pin->eld_update_frozen)
return;

snd_hdac_i915_set_bclk(&codec->bus->core);
\
 
 \ /
  Last update: 2022-09-28 09:15    [W:0.053 / U:0.036 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site