lkml.org 
[lkml]   [2022]   [Sep]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH] clk: sunxi-ng: h6: Fix default PLL GPU rate
From
Date
Quoting Jernej Skrabec (2022-09-28 13:01:22)
> In commit 4167ac8a657e ("clk: sunxi-ng: sun50i: h6: Modify GPU clock
> configuration to support DFS") divider M0 was forced to be 1 in order to
> support DFS. However, that left N as it is, at high value of 36. On
> boards without devfreq enabled (all of them in kernel 6.0), this
> effectively sets GPU frequency to 864 MHz. This is about 100 MHz above
> maximum supported frequency.
>
> In order to fix this, let's set N to 18 (register value 17). That way
> default frequency of 432 MHz is preserved.
>
> Fixes: 4167ac8a657e ("clk: sunxi-ng: sun50i: h6: Modify GPU clock configuration to support DFS")
> Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
> ---

Applied to clk-fixes

\
 
 \ /
  Last update: 2022-09-29 01:43    [W:0.033 / U:0.500 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site