lkml.org 
[lkml]   [2022]   [Sep]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH] mtd: rawnand: marvell: Use correct logic for nand-keep-config
Date

On 27/09/22 15:47, Chris Packham wrote:
> From: Tony O'Brien <tony.obrien@alliedtelesis.co.nz>
>
> Originally the absence of the marvell,nand-keep-config property caused
> the setup_data_interface function to be provided. However when
> setup_data_interface was moved into nand_controller_ops the logic was
> unintentionally inverted. Update the logic so that only if the
> marvell,nand-keep-config property is present the bootloader NAND config
> kept.
>
> Fixes: 7a08dbaedd36 ("mtd: rawnand: Move ->setup_data_interface() to nand_controller_ops")
> Signed-off-by: Tony O'Brien <tony.obrien@alliedtelesis.co.nz>
> Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
> ---
>
> Notes:
> I think this is a bug that's been lurking for 4 years or so. I'm not
> sure that's particularly long in the life of an embedded device but it
> does make me wonder if there have been other bug reports about it.
>
> We noticed this because we had a bootloader that used maxed out NAND
> timings which made the time it took the kernel to do anything on the
> file system longer than we expected.

I think there might be a similar logic inversion bug in
drivers/mtd/nand/raw/denali.c but I lack the ability to test for that
platform.

> drivers/mtd/nand/raw/marvell_nand.c | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/drivers/mtd/nand/raw/marvell_nand.c b/drivers/mtd/nand/raw/marvell_nand.c
> index 2455a581fd70..b248c5f657d5 100644
> --- a/drivers/mtd/nand/raw/marvell_nand.c
> +++ b/drivers/mtd/nand/raw/marvell_nand.c
> @@ -2672,7 +2672,7 @@ static int marvell_nand_chip_init(struct device *dev, struct marvell_nfc *nfc,
> chip->controller = &nfc->controller;
> nand_set_flash_node(chip, np);
>
> - if (!of_property_read_bool(np, "marvell,nand-keep-config"))
> + if (of_property_read_bool(np, "marvell,nand-keep-config"))
> chip->options |= NAND_KEEP_TIMINGS;
>
> mtd = nand_to_mtd(chip);
\
 
 \ /
  Last update: 2022-09-27 05:00    [W:0.106 / U:0.008 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site