lkml.org 
[lkml]   [2022]   [Sep]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] mtd: rawnand: marvell: Use correct logic for nand-keep-config
Date
From: Tony O'Brien <tony.obrien@alliedtelesis.co.nz>

Originally the absence of the marvell,nand-keep-config property caused
the setup_data_interface function to be provided. However when
setup_data_interface was moved into nand_controller_ops the logic was
unintentionally inverted. Update the logic so that only if the
marvell,nand-keep-config property is present the bootloader NAND config
kept.

Fixes: 7a08dbaedd36 ("mtd: rawnand: Move ->setup_data_interface() to nand_controller_ops")
Signed-off-by: Tony O'Brien <tony.obrien@alliedtelesis.co.nz>
Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
---

Notes:
I think this is a bug that's been lurking for 4 years or so. I'm not
sure that's particularly long in the life of an embedded device but it
does make me wonder if there have been other bug reports about it.

We noticed this because we had a bootloader that used maxed out NAND
timings which made the time it took the kernel to do anything on the
file system longer than we expected.

drivers/mtd/nand/raw/marvell_nand.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/mtd/nand/raw/marvell_nand.c b/drivers/mtd/nand/raw/marvell_nand.c
index 2455a581fd70..b248c5f657d5 100644
--- a/drivers/mtd/nand/raw/marvell_nand.c
+++ b/drivers/mtd/nand/raw/marvell_nand.c
@@ -2672,7 +2672,7 @@ static int marvell_nand_chip_init(struct device *dev, struct marvell_nfc *nfc,
chip->controller = &nfc->controller;
nand_set_flash_node(chip, np);

- if (!of_property_read_bool(np, "marvell,nand-keep-config"))
+ if (of_property_read_bool(np, "marvell,nand-keep-config"))
chip->options |= NAND_KEEP_TIMINGS;

mtd = nand_to_mtd(chip);
--
2.37.3
\
 
 \ /
  Last update: 2022-09-27 04:49    [W:0.080 / U:0.856 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site