lkml.org 
[lkml]   [2022]   [Sep]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH] ARM: dts: qcom: pmx65: use node name "gpio" for spmi-gpio
From
On 25/09/2022 21:06, Luca Weiss wrote:
> All other usages of qcom,spmi-gpio use the gpio@ node name, and this is
> also validated by the dt binding check. Fix it.
>
> Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
> ---
> arch/arm/boot/dts/qcom-pmx65.dtsi | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/arch/arm/boot/dts/qcom-pmx65.dtsi b/arch/arm/boot/dts/qcom-pmx65.dtsi
> index abf229a8b75a..1c7fdf59c1f5 100644
> --- a/arch/arm/boot/dts/qcom-pmx65.dtsi
> +++ b/arch/arm/boot/dts/qcom-pmx65.dtsi
> @@ -20,7 +20,7 @@ pmx65_temp: temp-alarm@a00 {
> #thermal-sensor-cells = <0>;
> };
>
> - pmx65_gpios: pinctrl@8800 {
> + pmx65_gpios: gpio@8800 {
> compatible = "qcom,pmx65-gpio", "qcom,spmi-gpio";
> reg = <0x8800>;
> gpio-controller;

Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>

\
 
 \ /
  Last update: 2022-09-26 10:20    [W:0.462 / U:0.020 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site