lkml.org 
[lkml]   [2022]   [Sep]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    /
    From
    Date
    SubjectRe: [PATCH v1 15/17] dt-bindings: display: mediatek: dpi: Add compatible for MediaTek MT8195
    On Thu, Sep 22, 2022 at 3:20 PM Krzysztof Kozlowski
    <krzysztof.kozlowski@linaro.org> wrote:
    >
    > On 19/09/2022 18:56, Guillaume Ranquet wrote:
    > > Add dt-binding documentation of dpi for MediaTek MT8195 SoC.
    > >
    > > Signed-off-by: Guillaume Ranquet <granquet@baylibre.com>
    > >
    > > diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,dpi.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,dpi.yaml
    > > index 5bb23e97cf33..2c7ecef54986 100644
    > > --- a/Documentation/devicetree/bindings/display/mediatek/mediatek,dpi.yaml
    > > +++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,dpi.yaml
    > > @@ -24,6 +24,7 @@ properties:
    > > - mediatek,mt8183-dpi
    > > - mediatek,mt8186-dpi
    > > - mediatek,mt8192-dpi
    > > + - mediatek,mt8195-dpi
    > > - mediatek,mt8195-dp-intf
    >
    > Aren't these the same?

    *-dpi are MIPI DPI (as in parallel data with DDR modes) encoders.
    *-dp-intf are Display Port encoder.

    Totally distinguishable. :)

    The hardware blocks seem similar upon cursory comparison of the register
    tables, with the base layout being the same, and sharing registers for
    basic settings such as the display timings.

    The DPI ones have some extra registers, presumably to control the signals
    or output width. The DP one has some registers of its own that only make
    sense for Display Port.


    ChenYu

    \
     
     \ /
      Last update: 2022-09-26 07:24    [W:2.856 / U:0.412 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site