lkml.org 
[lkml]   [2022]   [Sep]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH V2 0/9] Added Standard mode and SMBus support.
From


On 9/22/22 10:44, Manikanta Guntupalli wrote:
> -Added standard mode for AXI I2C controller.
> -Added Smbus block read support to xiic driver.
> -Added 'xlnx,axi-iic-2.1' new IP version support.
> -Added dynamic SCL frequency configuration support.
> -Removed 'local_irq_save/restore' calls as discussed
> here: https://www.spinics.net/lists/linux-i2c/msg46483.html.
>
> Raviteja Narayanam (9):
> i2c: xiic: Add standard mode support for > 255 byte read transfers
> i2c: xiic: Fix Rx and Tx paths in standard mode repeated start
> i2c: xiic: Switch to Xiic standard mode for i2c-read
> i2c: xiic: Add wait for FIFO empty in send_tx
> i2c: xiic: Add smbus_block_read functionality
> i2c: xiic: Remove interrupt enable/disable in Rx path
> dt-bindings: i2c: xiic: Add 'xlnx,axi-iic-2.1' to compatible
> i2c: xiic: Update compatible with new IP version
> i2c: xiic: Add SCL frequency configuration support
>
> .../bindings/i2c/xlnx,xps-iic-2.00.a.yaml | 7 +-
> drivers/i2c/busses/i2c-xiic.c | 582 ++++++++++++++++--
> 2 files changed, 537 insertions(+), 52 deletions(-)
>

I was reviewing this code internally that's why

Acked-by: Michal Simek <michal.simek@amd.com>

Thanks,
Michal

\
 
 \ /
  Last update: 2022-09-26 16:06    [W:0.107 / U:0.028 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site