lkml.org 
[lkml]   [2022]   [Sep]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH PULL 1/2] ARM: dts: exynos: correct s5k6a3 reset polarity on Midas family
Date
From: Dmitry Torokhov <dmitry.torokhov@gmail.com>

According to s5k6a3 driver code, the reset line for the chip appears to
be active low. This also matches the typical polarity of reset lines in
general. Let's fix it up as having correct polarity in DTS is important
when the driver will be switched over to gpiod API.

Fixes: b4fec64758ab ("ARM: dts: Add camera device nodes for Exynos4412 TRATS2 board")
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220913164104.203957-1-dmitry.torokhov@gmail.com
---
arch/arm/boot/dts/exynos4412-midas.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/exynos4412-midas.dtsi b/arch/arm/boot/dts/exynos4412-midas.dtsi
index b967397a46c5..8e1c19a8ad06 100644
--- a/arch/arm/boot/dts/exynos4412-midas.dtsi
+++ b/arch/arm/boot/dts/exynos4412-midas.dtsi
@@ -586,7 +586,7 @@ image-sensor@10 {
clocks = <&camera 1>;
clock-names = "extclk";
samsung,camclk-out = <1>;
- gpios = <&gpm1 6 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpm1 6 GPIO_ACTIVE_LOW>;

port {
is_s5k6a3_ep: endpoint {
--
2.34.1
\
 
 \ /
  Last update: 2022-09-26 13:46    [W:0.042 / U:0.336 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site