lkml.org 
[lkml]   [2022]   [Sep]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
SubjectRe: [PATCH RESEND v2 2/2] riscv: kprobe: Allow coexistence of ftrace and kprobe
On Fri, 23 Sep 2022 16:43:43 +0800
Li Huafei <lihuafei1@huawei.com> wrote:

> >> The problem is that we think that only the first instruction address at
> >> the function entry is needed for ftrace, but it is actually the first 4.
> >> As Masami mentioned in [1], we can treat the first 4 instructions as a
> >> 16-byte virtual instruction, and func+4, func+8 and func+12 will be
> >> changed to func+0. This way, ftrace and kprobe do not bother each other
> >> and can coexist.
> >>
> >> After this patch:
> >>
> >> # cd /sys/kernel/debug/tracing/
> >> # echo cmdline_proc_show > set_ftrace_filter
> >> # echo function > current_tracer
> >> # echo 'p cmdline_proc_show' > kprobe_events
> >> # echo 'p cmdline_proc_show+4' >> kprobe_events
> >> # echo 'p cmdline_proc_show+8' >> kprobe_events
> >> # echo 'p cmdline_proc_show+12' >> kprobe_events
> >> # echo 'p cmdline_proc_show+16' >> kprobe_events
> >
> > Oh, no, I meant, if it is a 16 byte virtual insturiction, it should
> > reject probing the address inside the instruction. It is rejected as
> > same as the case you probe "function+1" address (that is not an
> > instruction boundary, right?)
> >
> > So, it should reject it instead of modifying the probed address. (Return
> > -EILSEQ) It is usual there is any instruction which can not be probed.

I think it should return -EBUSY, because this is ftrace reserved area.

> >
> > Or, is there any real reason you "have to" probe such intermediate
> > address?
>
> No. In fact in my first version of the patch(see [1]),
> arch_adjust_kprobe_addr() returned -EILSEQ when probing intermediate
> addresses. but Guo pointed out that I changed the API and it did.
>
> Currently there are x86 & powerpc using their own arch_adjust_kprobe_addr().
>
> On x86, when X86_KERNEL_IBT is enabled, arch_adjust_kprobe_addr()
> adjusts sym+0 (endbr) to sym+4 (ftrace location). If we probe through
> kprobe_events, we get:
>
> # cd /sys/kernel/debug/tracing/
> # echo 'p cmdline_proc_show' > kprobe_events
> # echo 'p cmdline_proc_show+4' >> kprobe_events
> # ls events/kprobes/
> enable p_cmdline_proc_show_0
> filter p_cmdline_proc_show_4
> # cat /sys/kernel/debug/kprobes/list
> ffffffff812d31e4 k cmdline_proc_show+0x4 [DISABLED][FTRACE]
> ffffffff812d31e4 k cmdline_proc_show+0x4 [DISABLED][FTRACE]

This is because

- X86_KERNEL_IBT is an option.
- endbr is considered as a nop. (No accessible register has been changed)
- endbr is not involved in the ftrace itself.

I think I'd better to warn user that with X86_KERNEL_IBT the
probed address seems different in the document, because this
result seems something wrong. (see the event address is different
from where user specified.)

cat-152 [003] ..... 340.044650: p_cmdline_proc_show_4: (cmdline_proc_show+0x4/0x30)
cat-152 [003] ..... 340.044652: p_cmdline_proc_show_0: (cmdline_proc_show+0x4/0x30)

BPF is also working on this issue now;

https://lore.kernel.org/all/20220922210320.1076658-1-jolsa@kernel.org/T/#u

Maybe ftrace also should change to show the event address as +0
if the kprobe is on the function entry.


Anyway, so What you are doing is something like below;

# echo 'p cmdline_proc_show+5' > kprobe_events
# echo 'p cmdline_proc_show+6' > kprobe_events
# echo 'p cmdline_proc_show+7' > kprobe_events
# echo 'p cmdline_proc_show+8' > kprobe_events

All of those will fail because there is an ftrace replaced 5 byte nop
and it should NOT be replaced by the kprobes.

> '/sys/kernel/debug/tracing/events/kprobes/' shows that we generated two
> probe_events, but '/sys/kernel/debug/kprobes/list' shows that it is the
> same address with two probes (aggr_kprobe).

Yes, this is because the endbr is a special instruction, not the
ftrace instruction. When arm64 instroduces similar instruction,
we have to do similar thing.

>
> The same is true for powerpc:
>
> # cd /sys/kernel/debug/tracing/
> # echo 'p cmdline_proc_show' > kprobe_events
> # echo 'p cmdline_proc_show+12' >> kprobe_events
> # ls events/kprobes/
> enable p_cmdline_proc_show_0
> filter p_cmdline_proc_show_12
> # cat /sys/kernel/debug/kprobes/list
> c000000000515c0c k cmdline_proc_show+0xc [DISABLED][FTRACE]
> c000000000515c0c k cmdline_proc_show+0xc [DISABLED][FTRACE]
> c0000000000508c0 k __kretprobe_trampoline+0x0 [OPTIMIZED]

OK, so what about following rule?

kprobes on ftrace only accept the cases if the probe address is
either
- func + 0 (as function entry)
- func + offset, where the offset is what the ftrace returns.

If ftrace shows the IP (PC) is func+0 (x86 without endbr) it allows
only func+0. If it shows IP (PC) is func+4, it allows both func + 0
and func+4. But not allows other offsets for kprobes on ftrace because
such intermediate address doesn't have any means and no difference.
(the register sets also same)
This doesn't break even if you introduces something like endbr on
RISC-V in the future too.

>
> So for kprobe, can we consider all instructions before the "real"
> instruction of the function as a virtual instruction?

Yes, as far as those are the "ftrace reserved" instructions.

> And then refuse to
> probe the intermediate address of this virtual instruction to avoid
> ambiguity for the user here.

Yes.

Thank you,

>
> [1]
> https://lore.kernel.org/lkml/20220426015751.88582-2-lihuafei1@huawei.com/
>
> Thanks,
> Huafei
>
> >
> > Thank you,
> >
> >> # ls events/kprobes/
> >> enable p_cmdline_proc_show_12 p_cmdline_proc_show_8
> >> filter p_cmdline_proc_show_16
> >> p_cmdline_proc_show_0 p_cmdline_proc_show_4
> >> # echo 1 > events/kprobes/enable
> >> # cat ../kprobes/list
> >> ffffffff8025cba4 k cmdline_proc_show+0x0 [FTRACE]
> >> ffffffff8025cba4 k cmdline_proc_show+0x0 [FTRACE]
> >> ffffffff8025cba4 k cmdline_proc_show+0x0 [FTRACE]
> >> ffffffff8025cba4 k cmdline_proc_show+0x0 [FTRACE]
> >> ffffffff8025cbb4 k cmdline_proc_show+0x10
> >> # cat /proc/cmdline
> >> nokaslr rootwait root=/dev/vda rw
> >> # cat trace
> >> # tracer: function
> >> #
> >> # entries-in-buffer/entries-written: 6/6 #P:4
> >> #
> >> # _-----=> irqs-off/BH-disabled
> >> # / _----=> need-resched
> >> # | / _---=> hardirq/softirq
> >> # || / _--=> preempt-depth
> >> # ||| / _-=> migrate-disable
> >> # |||| / delay
> >> # TASK-PID CPU# ||||| TIMESTAMP FUNCTION
> >> # | | | ||||| | |
> >> cat-144 [000] ...2. 179.164908: p_cmdline_proc_show_12: (cmdline_proc_show+0x0/0x46)
> >> cat-144 [000] ...2. 179.165617: p_cmdline_proc_show_8: (cmdline_proc_show+0x0/0x46)
> >> cat-144 [000] ...2. 179.165653: p_cmdline_proc_show_4: (cmdline_proc_show+0x0/0x46)
> >> cat-144 [000] ...2. 179.165655: p_cmdline_proc_show_0: (cmdline_proc_show+0x0/0x46)
> >> cat-144 [000] ...2. 179.165837: cmdline_proc_show <-seq_read_iter
> >> cat-144 [000] d.... 179.166099: p_cmdline_proc_show_16: (cmdline_proc_show+0x10/0x46)
> >>
> >> [1] https://patchwork.kernel.org/project/linux-arm-kernel/patch/20191218140622.57bbaca5@xhacker.debian/
> >>
> >> Fixes: c22b0bcb1dd0 ("riscv: Add kprobes supported")
> >> Suggested-by: Guo Ren <guoren@kernel.org>
> >> Signed-off-by: Li Huafei <lihuafei1@huawei.com>
> >> ---
> >> v1: https://lore.kernel.org/lkml/20220426015751.88582-1-lihuafei1@huawei.com/
> >> v2: https://lore.kernel.org/lkml/20220819025522.154189-2-lihuafei1@huawei.com/
> >>
> >> v2 RESEND:
> >> - Rebase onto v6.0-rc4.
> >>
> >> Changlog in v1 -> v2:
> >> - Allows probing func+offs(<16) instead of returning -EILSEQ, which
> >> does not change the arch_adjust_kprobe_addr() interface convention.
> >> - ftrace_location(addr) is unnecessary, consistent with powerpc and
> >> x86.
> >>
> >> arch/riscv/include/asm/ftrace.h | 26 ++++++++++++++++++++++++++
> >> arch/riscv/kernel/ftrace.c | 26 --------------------------
> >> arch/riscv/kernel/probes/kprobes.c | 20 ++++++++++++++++++++
> >> 3 files changed, 46 insertions(+), 26 deletions(-)
> >>
> >> diff --git a/arch/riscv/include/asm/ftrace.h b/arch/riscv/include/asm/ftrace.h
> >> index 04dad3380041..c59e4a63f1c1 100644
> >> --- a/arch/riscv/include/asm/ftrace.h
> >> +++ b/arch/riscv/include/asm/ftrace.h
> >> @@ -77,6 +77,32 @@ do { \
> >> */
> >> #define MCOUNT_INSN_SIZE 8
> >>
> >> +/*
> >> + * Put 16 bytes at the front of the function within the patchable function
> >> + * entry nops' area.
> >> + *
> >> + * 0: REG_S ra, -SZREG(sp)
> >> + * 1: auipc ra, 0x?
> >> + * 2: jalr -?(ra)
> >> + * 3: REG_L ra, -SZREG(sp)
> >> + *
> >> + * So the opcodes is:
> >> + * 0: 0xfe113c23 (sd)/0xfe112e23 (sw)
> >> + * 1: 0x???????? -> auipc
> >> + * 2: 0x???????? -> jalr
> >> + * 3: 0xff813083 (ld)/0xffc12083 (lw)
> >> + */
> >> +#if __riscv_xlen == 64
> >> +#define INSN0 0xfe113c23
> >> +#define INSN3 0xff813083
> >> +#elif __riscv_xlen == 32
> >> +#define INSN0 0xfe112e23
> >> +#define INSN3 0xffc12083
> >> +#endif
> >> +
> >> +#define FUNC_ENTRY_SIZE 16
> >> +#define FUNC_ENTRY_JMP 4
> >> +
> >> #ifndef __ASSEMBLY__
> >> struct dyn_ftrace;
> >> int ftrace_init_nop(struct module *mod, struct dyn_ftrace *rec);
> >> diff --git a/arch/riscv/kernel/ftrace.c b/arch/riscv/kernel/ftrace.c
> >> index 552088e9acc4..9d951aab662a 100644
> >> --- a/arch/riscv/kernel/ftrace.c
> >> +++ b/arch/riscv/kernel/ftrace.c
> >> @@ -70,32 +70,6 @@ static int __ftrace_modify_call(unsigned long hook_pos, unsigned long target,
> >> return 0;
> >> }
> >>
> >> -/*
> >> - * Put 16 bytes at the front of the function within the patchable function
> >> - * entry nops' area.
> >> - *
> >> - * 0: REG_S ra, -SZREG(sp)
> >> - * 1: auipc ra, 0x?
> >> - * 2: jalr -?(ra)
> >> - * 3: REG_L ra, -SZREG(sp)
> >> - *
> >> - * So the opcodes is:
> >> - * 0: 0xfe113c23 (sd)/0xfe112e23 (sw)
> >> - * 1: 0x???????? -> auipc
> >> - * 2: 0x???????? -> jalr
> >> - * 3: 0xff813083 (ld)/0xffc12083 (lw)
> >> - */
> >> -#if __riscv_xlen == 64
> >> -#define INSN0 0xfe113c23
> >> -#define INSN3 0xff813083
> >> -#elif __riscv_xlen == 32
> >> -#define INSN0 0xfe112e23
> >> -#define INSN3 0xffc12083
> >> -#endif
> >> -
> >> -#define FUNC_ENTRY_SIZE 16
> >> -#define FUNC_ENTRY_JMP 4
> >> -
> >> int ftrace_make_call(struct dyn_ftrace *rec, unsigned long addr)
> >> {
> >> unsigned int call[4] = {INSN0, 0, 0, INSN3};
> >> diff --git a/arch/riscv/kernel/probes/kprobes.c b/arch/riscv/kernel/probes/kprobes.c
> >> index e6e950b7cf32..ef7aabec9681 100644
> >> --- a/arch/riscv/kernel/probes/kprobes.c
> >> +++ b/arch/riscv/kernel/probes/kprobes.c
> >> @@ -21,6 +21,26 @@ DEFINE_PER_CPU(struct kprobe_ctlblk, kprobe_ctlblk);
> >> static void __kprobes
> >> post_kprobe_handler(struct kprobe *, struct kprobe_ctlblk *, struct pt_regs *);
> >>
> >> +#ifdef CONFIG_DYNAMIC_FTRACE
> >> +kprobe_opcode_t *arch_adjust_kprobe_addr(unsigned long addr, unsigned long offset,
> >> + bool *on_func_entry)
> >> +{
> >> + /*
> >> + * The first 4 instructions at the beginning of the ftraced function
> >> + * are used as a jump to ftrace trampoline, which we can think of as
> >> + * a 16-byte virtual instruction. func+4, func+8 and func+12 will be
> >> + * changed to func+0. This allows the function entry to be probed with
> >> + * the help of KPROBES_ON_FTRACE and does not break ftrace
> >> + * functionality.
> >> + */
> >> + if (offset < FUNC_ENTRY_SIZE)
> >> + offset = 0;
> >> +
> >> + *on_func_entry = !offset;
> >> + return (kprobe_opcode_t *)(addr + offset);
> >> +}
> >> +#endif
> >> +
> >> static void __kprobes arch_prepare_ss_slot(struct kprobe *p)
> >> {
> >> unsigned long offset = GET_INSN_LENGTH(p->opcode);
> >> --
> >> 2.17.1
> >>
> >
> >


--
Masami Hiramatsu (Google) <mhiramat@kernel.org>

\
 
 \ /
  Last update: 2022-09-25 06:57    [W:0.116 / U:0.076 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site