lkml.org 
[lkml]   [2022]   [Sep]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v2] arm64: dts: rockchip: fix quartz64-a bluetooth configuration
On Sun, Sep 25, 2022 at 8:48 AM Lev Popov <leo@nabam.net> wrote:
>
> For "Quartz64 Model A" add missing RTS line to the UART interface used by
> bluetooth and swap bluetooth host-wakeup and device-wakeup gpio pins to
> match the boards physical layout. This changes are necessary to make
> bluetooth provided by the wireless module work.
>
> Fixes: cd414d5ac1fdeecf0617737e688a1af00858253a (arm64: dts: rockchip: rename Quartz64-A bluetooth gpios)

Good Evening,

That patch only renamed the lines to comply with the dt-bindings, the
correct patch is the one that introduced the original line layout:
Fixes: b33a22a1e7c4 ("arm64: dts: rockchip: add basic dts for Pine64
Quartz64-A")

Very Respectfully,
Peter

>
> Signed-off-by: Lev Popov <leo@nabam.net>
> ---
> arch/arm64/boot/dts/rockchip/rk3566-quartz64-a.dts | 6 +++---
> 1 file changed, 3 insertions(+), 3 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/rockchip/rk3566-quartz64-a.dts b/arch/arm64/boot/dts/rockchip/rk3566-quartz64-a.dts
> index a05460b92415..91908081c5ed 100644
> --- a/arch/arm64/boot/dts/rockchip/rk3566-quartz64-a.dts
> +++ b/arch/arm64/boot/dts/rockchip/rk3566-quartz64-a.dts
> @@ -740,7 +740,7 @@ &uart0 {
>
> &uart1 {
> pinctrl-names = "default";
> - pinctrl-0 = <&uart1m0_xfer &uart1m0_ctsn>;
> + pinctrl-0 = <&uart1m0_xfer &uart1m0_ctsn &uart1m0_rtsn>;
> status = "okay";
> uart-has-rtscts;
>
> @@ -748,8 +748,8 @@ bluetooth {
> compatible = "brcm,bcm43438-bt";
> clocks = <&rk817 1>;
> clock-names = "lpo";
> - device-wakeup-gpios = <&gpio2 RK_PC1 GPIO_ACTIVE_HIGH>;
> - host-wakeup-gpios = <&gpio2 RK_PC0 GPIO_ACTIVE_HIGH>;
> + host-wakeup-gpios = <&gpio2 RK_PC1 GPIO_ACTIVE_HIGH>;
> + device-wakeup-gpios = <&gpio2 RK_PC0 GPIO_ACTIVE_HIGH>;
> shutdown-gpios = <&gpio2 RK_PB7 GPIO_ACTIVE_HIGH>;
> pinctrl-names = "default";
> pinctrl-0 = <&bt_host_wake_l &bt_wake_l &bt_enable_h>;
> --
> 2.37.3
>

\
 
 \ /
  Last update: 2022-09-26 03:47    [W:2.773 / U:0.020 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site